Is bovine dentine an appropriate substitute in abrasion studies?

The study aimed to compare the wear behaviour of human and bovine dentine due to toothbrushing with different relative dentin abrasivity (RDA) toothpastes. Forty human and 40 bovine dentine samples were prepared from bovine lower incisors or human premolars roots, and baseline surface profiles were recorded. The samples were distributed to four groups (each group n = 10 human and 10 bovine samples) and brushed with fluoridated experimental toothpastes with different RDAs (group A: RDA 10, B: RDA 20, C: RDA 50, and D: RDA 100). Toothbrushing was performed in an automatic brushing machine with a brushing frequency of 60 strokes per minute and a brushing force of 2.5N. After 2, 5, 10, and 25min of toothbrushing, new surface profiles were recorded, and the dentine wear was calculated with a customised computer programme. The dentine wear of human and bovine dentine within the four groups was compared with unpaired t tests. No statistically significant difference was recorded for the dentine wear of human and bovine samples within the different group

Salivary Flow Rate During Toothbrushing

PURPOSE To determine the salivary flow rate and subsequent dilution of toothpaste and assess the pH of oral fluids during toothbrushing with toothpastes of various pHs. MATERIALS AND METHODS The study was conducted as an in-vivo trial involving 30 healthy volunteers. The participants took part in a series of trials distributed over four appointments. After a screening check, in which the participants' stimulated and unstimulated salivary flow rate and buffering capacities were determined, four test series involving toothbrushing were conducted. Participants brushed their teeth using a manual toothbrush for 2 min: once without toothpaste and three times using toothpastes of varying pHs. The salivary flow rate and subsequent dilution of the toothpaste was determined. Additionally, the pH of the collected oral fluid was analysed. RESULTS Brushing teeth with toothpaste caused a statistically significant increase in salivary flow rate (median/IQR in ml/min) (Elmex Kariesschutz 3.29/1.36, Colgate Total Original 3.23/1.08, Elmex Sensitive Professional 3.18/1.39) when compared to brushing teeth using a manual toothbrush without toothpaste (1.85/0.78) (p < 0.05). The variation in pH of the oral fluid samples was dictated primarily by the pH of the toothpaste used. CONCLUSION The salivary flow rate when brushing using toothpaste was similar across all tested toothpastes, independent of pH, and had an average median of 3.23 ml/min. The dilution of 1 g of toothpaste during a standard toothbrushing procedure of 2 min is therefore approximately at a ratio of one part toothpaste to 6.5 parts saliva

Colour improvement and stability of white spot lesions following infiltration, micro-abrasion, or fluoride treatments in vitro

SUMMARYBACKGROUND/OBJECTIVES: White spot lesions (WSLs) are unwelcome side effects of fixed appliances that compromise the treatment outcome. Recently, infiltration of WSLs has been introduced as a viable treatment alternative. The objective was to evaluate the colour improvement of WSLs and their stability against discolouration following infiltration, fluoride, or micro-abrasion treatments in vitro. MATERIALS/METHODS: Artificial WSLs were created in bovine enamel (N = 96) using acidic buffer solution (pH 5, 10 days) and were randomly allocated to four groups. Specimens were treated with infiltration (Icon, DMG), fluoride (Elmex Caries Protection, GABA), and micro-abrasion (Opalustre, Ultradent) or remained untreated (control). Groups were discoloured for 24 hours in tea or tea + citric acid. Colour components and visible colour change (L*, a*, b*, ΔE) were measured spectrophotometrically on following time points: baseline, after WSL formation, after treatment, and during discolouration (8, 16, and 24 hours). Data were analysed using Kruskal-Wallis and Mann-Whitney tests. RESULTS: WSL formation increased (L*) in all groups. Only infiltration reduced this effect to baseline. Highest ΔE improvement was obtained by infiltration and micro-abrasion followed by fluoride. This improvement was stable only for infiltration during discolouration. L*, a*, and b* changed significantly during discolouration in all groups except infiltration. Within the same treatment group, discolouration solutions did not differ significantly. LIMITATIONS: In vitro testing cannot replicate the actual mode of colour improvement or stability but can be used for ranking materials and techniques. CONCLUSIONS/IMPLICATIONS: Infiltration and micro-abrasion treatments were capable of diminishing the whitish appearance of WSLs. Only infiltrated WSLs were stable following discolouration challeng

Abrasive Enamel and Dentin Wear Resulting from Brushing with Toothpastes with Highly Discrepant Relative Enamel Abrasivity (REA) and Relative Dentin Abrasivity (RDA) Values

PURPOSE To investigate the absolute wear caused by toothpastes with highly discrepant REA (Relative Enamel Abrasivity) and RDA (Relative Dentin Abrasivity) values on both enamel and dentin: Candida Peppermint (CP; REA: 1; RDA: 42), Colgate Total Original (CTO; REA: 4; RDA: 100), Signal White System (SWS; REA: 8; RDA: 143), and Candida White Diamond (CWD; REA 244; RDA: 12). MATERIALS AND METHODS Eighty (80) bovine enamel samples and 80 dentin samples were divided into four groups each (n = 20) and investigated after a 6-h brushing procedure (21,600 cycles, 60 cycles/min, load of 2.5 N) with the four toothpastes. The abrasive enamel and dentin wear were registered using a contact profilometer. The median and interquartile range (IQR) of the abrasive enamel and dentin wear were calculated for each group. Pairwise comparisons were conducted using the Wilcoxon signed-rank exact test, and the p-value was adjusted according to Holm (statistical significance set at 0.05). RESULTS CWD led to the highest abrasive enamel wear (9.86 μm [5.77]). CTO caused the highest abrasive dentin wear (166.70 μm [69.90]), being statistically significantly higher than the wear for CP (54.20 μm [24.00]) and CWD (17.00 μm [7.80]) (p = 0.00001). The abrasive dentin wear for CWD was statistically significantly lower in comparison to all other groups (p = 0.00001). CONCLUSION Toothpastes with highly discrepant REA and RDA values presented statistically significantly different absolute wear on enamel and dentin. REA and RDA values should both be declared for every toothpaste

Supplementation of Energy Drinks with Green Tea Extract: Effect on In Vitro Abrasive/Erosive Dentin Wear

PURPOSE: To investigate the effect of the supplementation of energy drinks with green tea extract on abrasive and erosive dentin wear. MATERIALS AND METHODS: Six groups, each comprising 15 bovine dentin samples, were prepared, yielding a total of 90 samples. Erosion was performed by immersing the samples in Red Bull and Red Bull light with and without green tea extract. Tap water with and without green tea extract was used as the control groups. The samples were subjected to abrasive/erosive cycling for five days. The following cycling was performed daily: toothbrush abrasion (20 brushstrokes; 2.5 N); eight erosive cycles (2 min storage in the respective solutions); in between the erosive cycles, storage in artificial saliva (60 min) and again toothbrush abrasion (20 brushstrokes; 2.5 N). During the night, samples were again stored in artificial saliva. Abrasive/erosive dentin wear was measured using a stylus profilometer (µm, accuracy = 40 nm). The measured dentin loss results from the vertical position shift on the y-axis from base to final profile after the wear process in 2D. Pairwise comparisons between the groups were carried out using Wilcoxon signed-rank test. RESULTS: The following dentin wear (median [IQR]) was measured: Red Bull: 1.9 µm (0.5); Red Bull Light: 1.3 µm (0.3); Red Bull with green tea extract: 0.8 µm (0.3); Red Bull Light with green tea extract: 0.3 µm (0.5); Tap water with green tea extract: -0.2 µm (0.7); Tap water: -1.0 µm (1.2). The comparison of all tested groups to each other proved to be statistically significant (p < 0.05). CONCLUSION: The supplementation of energy drinks with green tea extract provide a protective effect against erosive/abrasive wear in vitro

Zahnerosionen im Zusammenhang mit gastroösophagealem Reflux: Ursache, Prävention und restaurative Therapie

Tooth Erosions Associated with Gastroesophageal Reflux: Cause, Prevention and Restorative Therapy Abstract. Dental erosions are caused by the recurring contact of solutions which are unsaturated in tooth minerals,ith hard tooth substances. This initially leads to softening and later to an irreversible loss of hard tooth substance. Erosion is observed particularly with excessive consumption of acidic foods (e.g. soft drinks or citrus fruits) but also in connection with gastrointestinal (gastroesophageal reflux disease) or psychosomatic diseases (anorexia nervosa or bulimia nervosa). The aim of this article is to define dental erosions, their causes, prevalence and consequences as well as possible preventive measures. Based on a clinical example of a patient with reflux-related erosions, a therapy option with direct composite tooth build-up is presente

Effect of a sonic toothbrush on the abrasive dentine wear using toothpastes with different abrasivity values

OBJECTIVE This in vitro study aimed to investigate the effect of a sonic toothbrush on the resulting abrasive dentine wear using toothpastes with different abrasivities compared to the use of a manual toothbrush. METHODS Ninety-six bovine dentine samples were divided into six groups and subjected to a brushing sequence (sonic: 20 min, 0.9 N, 10 strokes/min; manual: 20 min, 1.6 N, 60 strokes/min) as follows: group 1: Elmex Sensitive Plus (RDA = 28) + manual toothbrush; group 2: Elmex Sensitive + sonic toothbrush; group 3: Elmex Kariesschutz (RDA = 65) + manual toothbrush; group 4: Elmex Kariesschutz +sonic toothbrush; group 5: Colgate Total Original (RDA = 121) + manual toothbrush; and group 6: Colgate Total Original +sonic toothbrush. The abrasive dentine wear was measured profilometrically. RESULTS The median (IQR) abrasive dentine wear was as follows: Elmex Sensitive Plus (manual toothbrush: 2.7 µm (0.8), sonic toothbrush: 3.1 µm (1.9)); Elmex Kariesschutz (manual toothbrush: 4.9 µm (1.4), sonic toothbrush: 6.4 µm (2.1)); and Colgate Total Original (manual toothbrush: 5.2 µm (1.1), sonic toothbrush: 9.0 µm (3.1)). Differences in dentine wear between sonic and manual toothbrushes were statistically significant only in the groups brushed with Elmex Kariesschutz and Colgate Total Original (p ≤ 0.05). CONCLUSION Brushing with a sonic toothbrush could result in a higher abrasive dentine wear compared to manual toothbrush when combined with toothpastes with high abrasivity values

Effect of Toothbrush Bristle Stiffness and Brushing Force on Cleaning Efficacy

PURPOSE This study investigated the effect of toothbrush bristle stiffness and brushing force on the cleaning efficacy in vitro. MATERIALS AND METHODS Eighty bovine dentin samples were allocated to eight groups (n=10). Two custom-made toothbrushes of different bristle stiffness (soft and medium) were tested at four different brushing forces (1, 2, 3 and 4 N). Dentin samples were stained in black tea and brushed (60 strokes/min) for a total of 25 min in a brushing machine with an abrasive solution (RDA 67). Photographs were taken after 2 and 25 min of brushing time. Cleaning efficacy was measured planimetrically. RESULTS After 2 min of brushing, the soft-bristle toothbrush did not cause statistically significantly different cleaning efficacy at different brushing forces, while the medium-bristle toothbrush cleaned statistically significantly less efficaceously only at 1 N. Comparing the two different toothbrushes, higher cleaning efficacy was observed only at 1 N for the soft-bristle brush. At 25 min brushing time, the soft-bristle cleaned statistically significantly better at 4 N compared to 1 N and 2 N and at 3 N compared to 1 N. Using the medium-bristle, cleaning efficacy increased with increasing brushing force. After 25 min of brushing, no statistically significant difference was observed between the two different toothbrushes. CONCLUSION Irrespective the brushing force, the use of a soft or medium toothbrush results in comparable cleaning efficacy. At 2 min brushing time, increasing the brushing force does not increase the cleaning efficacy

Interplay Between the In-Vitro Cleaning Performance and Wear of Manual Toothbrushes

PURPOSE This in-vitro study deals with the question of whether the wear and tear of the manual toothbrush over a simulated timeframe up to 24 months has an effect on its cleaning performance. The purpose was to find indications as to whether and when a toothbrush needs to be replaced based on its cleaning performance. MATERIALS AND METHODS Models equipped with artificial teeth (coated with titanium dioxide) were brushed in-vitro using a brushing machine with clamped manual toothbrushes. The machine carried out even, horizontal brush strokes (120 brush strokes/min) for 1 min with a constant contact pressure of 2.5 N. The percentage of the area of titanium dioxide removed from the buccal, mesial and distal surfaces of the artificial teeth corresponded to the cleaning performance. The manual toothbrushes were used on bovine roots to simulate the wear and tear after 2, 4, 6, 12, 18, 24 months of use. The cleaning performance was re-evaluated after each simulated timepoint of wear. In addition, the brushes were photographed after each cycle. RESULTS An increase in the in-vitro cleaning performance of the toothbrush was observed up to 6 months of wear compared to the starting point. After that, the cleaning performance decreased somewhat, but always remained above the initial cleaning performance. CONCLUSION Based on the in-vitro cleaning performance after 24 months, the toothbrush would not have to be replaced. However, this in-vitro study cannot determine when a toothbrush should be replaced, because in-vivo it is also dependent on a variety of other factors such as fraying and microbial colonisation. Direct transfer of results from this study to everyday clinical practice is therefore difficult