Wind loads on ground-based telescopes

One of the factors that can influence the performance of large optical telescopes is the vibration of the telescope structure due to unsteady wind inside the telescope enclosure. Estimating the resulting degradation in image quality has been difficult because of the relatively poor understanding of the flow characteristics. Significant progress has recently been made, informed by measurements in existing observatories, wind-tunnel tests, and computational fluid dynamic analyses. We combine the information from these sources to summarize the relevant wind characteristics and enable a model of the dynamic wind loads on a telescope structure within an enclosure. The amplitude, temporal spectrum, and spatial distribution of wind disturbances are defined as a function of relevant design parameters, providing a significant improvement in our understanding of an important design issue

Parametric modeling and control of telescope wind-induced vibration

A parametric model of the dynamic performance of an optical telescope due to wind-buffeting is presented. The model is being developed to support the design of next generation segmented-mirror optical telescopes through enabling rapid design iterations and allowing a more thorough exploration of the design space. A realistic performance assessment requires parametric descriptions of the wind, the structural dynamics, active control of the structure, and the optical response. The current model and its assumptions are presented, with the primary emphasis being on the parameterization of the wind forces. Understanding the temporal spectrum and spatial distribution of wind disturbances inside the telescope enclosure is one of the most challenging aspects in developing the overall parametric model. This involves integrating information from wind tunnel tests, computational fluid dynamics, and measurements at existing observatories. The potential and limitations of control to mitigate the response are also discussed, with realistic constraints on the control bandwidth obtained from the detailed structural model of a particular point design. Finally, initial results are presented on performance trends with a few key parameter variations

Modeling tools to estimate the performance of the Thirty Meter Telescope: an integrated approach

A sound system engineering approach and the appropriate tools to support it are essential in achieving the scientific and financial objectives of the Thirty Meter Telescope project. Major elements of the required tool set are those providing estimates for the performance of the telescope. During the last couple of years, the partners in the consortium developed a wide range of modeling and simulation tools with various levels of fidelity and flexibility. There are models available for time domain and frequency domain simulations and analysis, as well as for lower fidelity, parametric investigations of design trade-offs and for high fidelity, integrated modeling of structure, optics and control. Presented are characteristic simulation results using the existing preliminary point designs of the TMT, with emphasis on the telescope performance degradation due to wind buffeting. Under the conditions modeled, the wind induced image jitter and image quality degradation was found comparable to good atmospheric seeing

NFIRAOS adaptive optics for the Thirty Meter Telescope

NFIRAOS (Narrow-Field InfraRed Adaptive Optics System) will be the first-light multi-conjugate adaptive optics system for the Thirty Meter Telescope (TMT). NFIRAOS houses all of its opto-mechanical sub-systems within an optics enclosure cooled to precisely -30°C in order to improve sensitivity in the near-infrared. It supports up to three client science instruments, including the first-light InfraRed Imaging Spectrograph (IRIS). Powering NFIRAOS is a Real Time Controller that will process the signals from six laser wavefront sensors, one natural guide star pyramid WFS, up to three low-order on-instrument WFS and up to four guide windows on the client instrument’s science detector in order to correct for atmospheric turbulence, windshake, optical errors and plate-scale distortion. NFIRAOS is currently preparing for its final design review in late June 2018 at NRC Herzberg in Victoria, British Columbia in partnership with Canadian industry and TMT

Optomechanical design of TMT NFIRAOS Subsystems at INO

The adaptive optics system for the Thirty Meter Telescope (TMT) is the Narrow-Field InfraRed Adaptive Optics System (NFIRAOS). Recently, INO has been involved in the optomechanical design of several subsystems of NFIRAOS, including the Instrument Selection Mirror (ISM), the NFIRAOS Beamsplitters (NBS), and the NFIRAOS Source Simulator system (NSS) comprising the Focal Plane Mask (FPM), the Laser Guide Star (LGS) sources, and the Natural Guide Star (NGS) sources. This paper presents an overview of these subsystems and the optomechanical design approaches used to meet the optical performance requirements under environmental constraints

NFIRAOS: TMT's facility adaptive optics system

NFIRAOS, the TMT Observatory's initial facility AO system is a multi-conjugate AO system feeding science light from 0.8 to 2.5 microns wavelength to several near-IR client instruments. NFIRAOS has two deformable mirrors optically conjugated to 0 and 11.2 km, and will correct atmospheric turbulence with 50 per cent sky coverage at the galactic pole. An important requirement is to have very low background: the plan is to cool the optics; and one DM is on a tip/tilt stage to reduce surface count. NFIRAOS' real time control uses multiple sodium laser wavefront sensors and up to three IR natural guide star tip/tilt and/or tip/tilt/focus sensors located within each client instrument. Extremely large telescopes are sensitive to errors due to the variability of the sodium layer. To reduce this sensitivity, NFIRAOS uses innovative algorithms coupled with Truth wavefront sensors to monitor a natural star at low bandwidth. It also includes an IR acquisition camera, and a high speed NGS WFS for operation without lasers. For calibration, NFIRAOS includes simulators of both natural stars at infinity and laser guide stars at varying range distance. Because astrometry is an important science programme for NFIRAOS, there is a precision pinhole mask deployable at the input focal plane. This mask is illuminated by a science wavelength and flat-field calibrator that shines light into NFIRAOS' entrance window. We report on recent effort especially including trade studies to reduce field distortion in the science path and to reduce cost and complexity

Optomechanical design of TMT NFIRAOS Subsystems at INO

The adaptive optics system for the Thirty Meter Telescope (TMT) is the Narrow-Field InfraRed Adaptive Optics System (NFIRAOS). Recently, INO has been involved in the optomechanical design of several subsystems of NFIRAOS, including the Instrument Selection Mirror (ISM), the NFIRAOS Beamsplitters (NBS), and the NFIRAOS Source Simulator system (NSS) comprising the Focal Plane Mask (FPM), the Laser Guide Star (LGS) sources, and the Natural Guide Star (NGS) sources. This paper presents an overview of these subsystems and the optomechanical design approaches used to meet the optical performance requirements under environmental constraints

GPI 2.0: Performance Evaluation of the Wavefront Sensor's EMCCD

The Gemini Planet Imager (GPI) is a high contrast imaging instrument that aims to detect and characterize extrasolar planets. GPI is being upgraded to GPI 2.0, with several subsystems receiving a re-design to improve the instrument's contrast. To enable observations on fainter targets and increase stability on brighter ones, one of the upgrades is to the adaptive optics system. The current Shack-Hartmann wavefront sensor (WFS) is being replaced by a pyramid WFS with an low-noise electron multiplying CCD (EMCCD). EMCCDs are detectors capable of counting single photon events at high speed and high sensitivity. In this work, we characterize the performance of the HN\"u 240 EMCCD from N\"uv\"u Cameras, which was custom-built for GPI 2.0. The HN\"u 240 EMCCD's characteristics make it well suited for extreme AO: it has low dark current ($<$ 0.01 e-/pix/fr), low readout noise (0.1 e-/pix/fr at a gain of 5000), high quantum efficiency ( 90% at wavelengths from 600-800 nm; 70% from 800-900 nm), and fast readout (up to 3000 fps full frame). Here we present test results on the EMCCD's noise contributors, such as the readout noise, pixel-to-pixel variability and CCD bias. We also tested the linearity and EM gain calibration of the detector. All camera tests were conducted before its integration into the GPI 2.0 PWFS system.Comment: 16 pages, 14 figures. Conference Proceedings for AO4ELT7, held in June 2023 in Avignon, Franc

NFIRAOS adaptive optics for the Thirty Meter Telescope

NFIRAOS (Narrow-Field InfraRed Adaptive Optics System) will be the first-light multi-conjugate adaptive optics system for the Thirty Meter Telescope (TMT). NFIRAOS houses all of its opto-mechanical sub-systems within an optics enclosure cooled to precisely -30°C in order to improve sensitivity in the near-infrared. It supports up to three client science instruments, including the first-light InfraRed Imaging Spectrograph (IRIS). Powering NFIRAOS is a Real Time Controller that will process the signals from six laser wavefront sensors, one natural guide star pyramid WFS, up to three low-order on-instrument WFS and up to four guide windows on the client instrument’s science detector in order to correct for atmospheric turbulence, windshake, optical errors and plate-scale distortion. NFIRAOS is currently preparing for its final design review in late June 2018 at NRC Herzberg in Victoria, British Columbia in partnership with Canadian industry and TMT

NFIRAOS: TMT's facility adaptive optics system

NFIRAOS, the TMT Observatory's initial facility AO system is a multi-conjugate AO system feeding science light from 0.8 to 2.5 microns wavelength to several near-IR client instruments. NFIRAOS has two deformable mirrors optically conjugated to 0 and 11.2 km, and will correct atmospheric turbulence with 50 per cent sky coverage at the galactic pole. An important requirement is to have very low background: the plan is to cool the optics; and one DM is on a tip/tilt stage to reduce surface count. NFIRAOS' real time control uses multiple sodium laser wavefront sensors and up to three IR natural guide star tip/tilt and/or tip/tilt/focus sensors located within each client instrument. Extremely large telescopes are sensitive to errors due to the variability of the sodium layer. To reduce this sensitivity, NFIRAOS uses innovative algorithms coupled with Truth wavefront sensors to monitor a natural star at low bandwidth. It also includes an IR acquisition camera, and a high speed NGS WFS for operation without lasers. For calibration, NFIRAOS includes simulators of both natural stars at infinity and laser guide stars at varying range distance. Because astrometry is an important science programme for NFIRAOS, there is a precision pinhole mask deployable at the input focal plane. This mask is illuminated by a science wavelength and flat-field calibrator that shines light into NFIRAOS' entrance window. We report on recent effort especially including trade studies to reduce field distortion in the science path and to reduce cost and complexity