Delaminations in composite plates under impact loads

A method is presented for calculating the locations, shapes, and sizes of delaminations which occur in a fiber reinforced composite plate subjected to non-penetrating (low velocity) impact of a solid object. The plate may be simply supported, clamped, or free along its edges. A failure model of the delamination formation was developed. This model was then coupled with a finite element analysis. The model and the finite element analysis were then implemented by a computer code (IMPACT-ST) which can be used to estimate the damage initiation load and the locations, shapes, and sizes of the delaminations. Tests were performed measuring the geometries of the delaminations in graphite-epoxy, graphite-toughened epoxy, and graphite-PEEK plates impacted by a projectile with a spherical tip having masses ranging from 0.355 lbm to 0.963 lbm and velocities from 50 in/sec to 225 in/sec. The data were compared to the results of the model, and good agreements were found between the measured and the calculated delamination lengths and widths

Delaminations in composite plates caused by non-penetrating impact

A model is presented for estimating the dimensions of delaminations in continuous fiber reinforced composite plates subjected to non-penetrating (low velocity) impact of a solid object. The model is based on dimensional analysis, and results in two simple, closed form expressions, one providing the delamination length, the other the delamination width. Comparisons of delamination lengths and widths calculated by these expressions with experimental data suggest that the model predicts these dimensions with reasonable accuracy

Present and future potential of plant-derived products to control arthropods of veterinary and medical significance

The use of synthetic pesticides and repellents to target pests of veterinary and medical significance is becoming increasingly problematic. One alternative approach employs the bioactive attributes of plant-derived products (PDPs). These are particularly attractive on the grounds of low mammalian toxicity, short environmental persistence and complex chemistries that should limit development of pest resistance against them. Several pesticides and repellents based on PDPs are already available, and in some cases widely utilised, in modern pest management. Many more have a long history of traditional use in poorer areas of the globe where access to synthetic pesticides is often limited. Preliminary studies support that PDPs could be more widely used to target numerous medical and veterinary pests, with modes of action often specific to invertebrates. Though their current and future potential appears significant, development and deployment of PDPs to target veterinary and medical pests is not without issue. Variable efficacy is widely recognised as a restraint to PDPs for pest control. Identifying and developing natural bioactive PDP components in place of chemically less-stable raw or 'whole’ products seems to be the most popular solution to this problem. A limited residual activity, often due to photosensitivity or high volatility, is a further drawback in some cases (though potentially advantageous in others). Nevertheless, encapsulation technologies and other slow-release mechanisms offer strong potential to improve residual activity where needed. The current review provides a summary of existing use and future potential of PDPs against ectoparasites of veterinary and medical significance. Four main types of PDP are considered (pyrethrum, neem, essential oils and plant extracts) for their pesticidal, growth regulating and repellent or deterrent properties. An overview of existing use and research for each is provided, with direction to more extensive reviews given in many sections. Sections to highlight potential issues, modes of action and emerging and future potential are also included

Compressive strength of damaged and repaired composite plates

Tests were performed assessing the effectiveness of repair in restoring the mechanical properties of damaged, solid composite plates made of Fiberite T300/976 graphite-epoxy. Some (75%) or all (100%) of the damaged zone was cut out, and the plate was repaired by plugging and patching the hole. The effectiveness of the repair was evaluated by measuring the compressive strengths of undamaged plates, damaged plates with no cutout, damaged plates with a cutout, and plates that had been repaired

Cultural Expression Through Art

Our project’s goal is to work towards greater cultural awareness within the Missoula community by focusing on educating children about culture through art. Cultural education has been slow to be implemented in schools, although it is increasing in importance as diversity in the Missoula community and the rest of the U.S. continues to increase. Cultural awareness is a broad term that covers multiple aspects of awareness: empathy, competence, safety, and intelligence. Learning cultural awareness begins at a young age, so we designed a hands-on learning experience directed at students in grades 4 through 6. We decided to use art as a way to connect students to culture in an engaging and memorable way. Due to COVID-19, we created a virtual learning experience using materials that students could easily find at home or any store. Our website contains an introductory lesson on what culture is as well as other lessons led by educators who volunteered to partner with us. Educators provided an art tutorial video as well as a lesson about the culture behind the art project. We partnered with a local nonprofit, The Flagship Program, to offer the website to a small group of students in order to test our website’s functionality and obtain feedback from educators and their students about the material and areas for improvement. By encouraging cultural awareness at young ages, we can support students in developing cross-cultural skills that will foster future global awareness and communication skills. Art itself is a cultural activity that fosters growth, inclusivity, and innovation. By looking at art forms originating in different cultures, our project shows one of the many ways that cultural education can be incorporated into classrooms

Associations of parental age with health and social factors in adult offspring. Methodological pitfalls and possibilities

Parental age is increasing rapidly in many countries. Analysis of this potentially important influence on offspring well-being is hampered by strong secular trends and socioeconomic patterning and by a shortage of follow-up data for adult offspring. We used Swedish national data on up to 3,653,938 offspring to consider the associations of parental age with a suite of outcomes in adult offspring, comparing the results from an array of statistical methods for optimal causal inference. The offspring of older mothers had higher BMI, blood pressure, height, intelligence, non-cognitive ability and socioeconomic position. They were less likely to smoke or to be left-handed. Associations with paternal age were strongly, but not completely, attenuated by adjustment for maternal age. Estimates from the commonly-used sibling comparison method were driven primarily by a pathway mediated by offspring date of birth when outcomes showed strong secular trends. These results suggest that the intra-uterine and early life environments provided by older mothers may be detrimental to offspring cardiovascular health, but that their greater life experience and social position may bring intellectual and social advantages to their offspring. The analysis of parental age presents particular challenges, and further methodological developments are needed

Non-equilibrium modifications of the nuclear equation of state

Non-equilibrium modifications of the nuclear equation of state are assessed in the framework of Extended Irreversible Thermodynamics. The expected size of the non-equilibrium corrections to quantities like the nuclear-matter incompressibility $K$ and the liquid-vapor critical temperature $T_c$ are compared to the uncertainties associated at present with the usual equilibrium values. The quantitative estimates are obtained in situations characterized by a stationary planar shear flow of realistic magnitude, or by a stationary temperature gradient.Comment: 10 pages, latex, no figure

Properties of the KISS Green Pea Galaxies

Green peas (GPs) are a class of extreme star-forming galaxies (SFGs) at intermediate redshifts, originally discovered via color selection using multifilter, wide-field survey imaging data. They are commonly thought of as being analogs of high-redshift Lyα-emitting galaxies. The defining characteristic of GP galaxies is a high-excitation nebular spectrum with very large equivalent width lines, leading to the recognition that GP-like galaxies can also be identified in samples of emission-line galaxies. Here we compare the properties a sample of [O iii]-selected SFGs (z = 0.29–0.41) from the KPNO International Spectroscopic Survey (KISS) with the color-selected GPs. We find that the KISS [O iii]-selected galaxies overlap with the parameter space defined by the color-selected GPs; the two samples appear to be drawn from the same population of objects. We compare the KISS GPs with the full Hα-selected KISS SFG sample (z < 0.1) and find that they are extreme systems. Many appear to be young systems at their observed look-back times (3–4 Gyr), with more than 90% of their rest-frame B-band luminosity coming from the starburst population. We compute the volume density of the KISS red (KISSR) GPs at z = 0.29–0.41 and find that they are extremely rare objects. We do not see galaxies as extreme as the KISSR GPs in the local universe, although we recognize several lower-luminosity systems at z < 0.1

Properties of the KISS Green Pea Galaxies

Green Peas are a class of extreme star-forming galaxies at intermediate redshifts, originally discovered via color-selection using multi-filter, wide-field survey imaging data (Cardamone et al. 2009). They are commonly thought of as being analogs of high-redshift Ly$\alpha$-emitting galaxies. The defining characteristic of Green Pea galaxies is a high-excitation nebular spectrum with very large equivalent width lines, leading to the recognition that Green Pea-like galaxies can also be identified in samples of emission-line galaxies. Here we compare the properties a sample of [O III]-selected star-forming galaxies (z = 0.29-0.41) from the KPNO International Spectroscopic Survey (KISS) with the color-selected Green Peas. We find that the KISS [O III]-selected galaxies overlap with the parameter space defined by the color-selected Green Peas; the two samples appear to be drawn from the same population of objects. We compare the KISS Green Peas with the full H$\alpha$-selected KISS star-forming galaxy sample (z $<$ 0.1) and find that they are extreme systems. Many appear to be young systems at their observed look-back times (3-4 Gyr), with more than 90% of their rest-frame B-band luminosity coming from the starburst population. We compute the volume density of the KISSR Green Peas at z = 0.29-0.41 and find that they are extremely rare objects. We don't see galaxies as extreme as the KISSR Green Peas in the local Universe, although we recognize several lower-luminosity systems at z $<$ 0.1.Comment: 21 pages, 12 figures. Accepted for publication in the Astrophysical Journa