Giant extensional strain of magnetoactive elastomeric cylinders in uniform magnetic fields

Elongations of magnetoactive elastomers (MAEs) under ascending-descending uniform magnetic fields were studied experimentally using a laboratory apparatus specifically designed to measure large extensional strains (up to 20%) in compliant MAEs. In the literature, such a phenomenon is usually denoted as giant magnetostriction. The synthesized cylindrical MAE samples were based on polydimethylsiloxane matrices filled with micrometer-sized particles of carbonyl iron. The impact of both the macroscopic shape factor of the samples and their magneto-mechanical characteristics were evaluated. For this purpose, the aspect ratio of the MAE cylindrical samples, the concentration of magnetic particles in MAEs and the effective shear modulus were systematically varied. It was shown that the magnetically induced elongation of MAE cylinders in the maximum magnetic field of about 400 kA/m, applied along the cylinder axis, grew with the increasing aspect ratio. The effect of the sample composition is discussed in terms of magnetic filler rearrangements in magnetic fields and the observed experimental tendencies are rationalized by simple theoretical estimates. The obtained results can be used for the design of new smart materials with magnetic-field-controlled deformation properties, e.g., for soft robotics. © 2020 by the authors

Vibrational energy harvesting device with magnetic tip mass

In this paper, the energy-harvesting device based on vibrational piezoelectric transducer for AC magnetic field conversion is presented. The harvester consists of the transducer and an AC/DC-converter. The load dependencies of the transducer showed that the maximal rms power reached a peak of Prms = 37 μW at f = 50 Hz and Prms = 200 μW at f = 48 Hz. If the harvester is placed into an external AC magnetic field h(t) of the frequency f = 48 Hz and constant amplitude of h = 5 Oe, DC voltage of fixed level (1.8 V, 2.5 V, 3.3 V or 3.6 V) is available on the output. Charging time depends on the voltage level and has a maximum value of t ≈ 11 s for 3.6 V and minimum value t ≈ 6 s for 1.8 V

Phase Conductance of BiFeO₃ Film

In this work, the local conductance of the tetragonal-like (T-like) and rhombohedral-like (R-like) phases of epitaxial BiFeO3 film is systematically studied via conductive atomic force microscopy. At higher tip voltage, there is a mutual transition between the T-like and R-like phases, which could be attributed to the strain relaxation in the T-like phase induced by electric poling, as well as local polarization switching. The T-like phase exhibits a higher conductance, which is related to the lower interface potential barrier between the tip and film surface. Reversible low- and high-current states in the T-like phase can be tuned by polarization switching. These results will be helpful for designing novel nanoelectronic devices, such as voltage and strain sensors

A Flexible Magnetic Field Sensor Based on PZT/CFO Bilayer via van der Waals Oxide Heteroepitaxy

Magnetoelectric (ME) magnetic field sensors utilize ME effects in ferroelectric ferromagnetic layered heterostructures to convert magnetic signals into electrical signals. However, the substrate clamping effect greatly limits the design and fabrication of ME composites with high ME coefficients. To reduce the clamping effect and improve the ME response, a flexible ME sensor based on PbZr0.2Ti0.8O3 (PZT)/CoFe2O4 (CFO) ME bilayered heterostructure was deposited on mica substrates via van der Waals oxide heteroepitaxy. A saturated magnetization of 114.5 emu/cm3 was observed in the bilayers. The flexible sensor exhibited a strong ME coefficient of 6.12 V/cm·Oe. The local ME coupling has been confirmed by the evolution of the ferroelectric domain under applied magnetic fields. The flexible ME sensor possessed a stable response with high sensitivity to both AC and DC weak magnetic fields. A high linearity of 0.9988 and sensitivity of 72.65 mV/Oe of the ME sensor were obtained under flat states. The ME output and limit-of-detection under different bending states showed an inferior trend as the bending radius increased. A flexible proximity sensor has been demonstrated, indicating a promising avenue for wearable device applications and significantly broadening the potential application of the flexible ME magnetic field sensors

Bandwidth Widening of Piezoelectric Cantilever Beam Arrays by Mass-Tip Tuning for Low-Frequency Vibration Energy Harvesting

Wireless sensor networks usually rely on internal permanent or rechargeable batteries as a power supply, causing high maintenance efforts. An alternative solution is to supply the entire system by harvesting the ambient energy, for example, by transducing ambient vibrations into electric energy by virtue of the piezoelectric effect. The purpose of this paper is to present a simple engineering approach for the bandwidth optimization of vibration energy harvesting systems comprising multiple piezoelectric cantilevers (PECs). The frequency tuning of a particular cantilever is achieved by changing the tip mass. It is shown that the bandwidth enhancement by mass tuning is limited and requires several PECs with close resonance frequencies. At a fixed frequency detuning between subsequent PECs, the achievable bandwidth shows a saturation behavior as a function of the number of cantilevers used. Since the resonance frequency of each PEC is different, the output voltages at a particular excitation frequency have different amplitudes and phases. A simple power-transfer circuit where several PECs with an individual full wave bridge rectifier are connected in parallel allows one to extract the electrical power close to the theoretical maximum excluding the diode losses. The experiments performed on two- and three-PEC arrays show reasonable agreement with simulations and demonstrate that this power-transfer circuit additionally influences the frequency dependence of the harvested electrical power

Nanosilicon: properties, synthesis, applications, methods of analysis and control

Nanosilicon: Properties, Synthesis, Applications, Methods of Analysis and Control examines the latest developments on the physics and chemistry of nanosilicon. The book focuses on methods for producing nanosilicon, its electronic and optical properties, research methods to characterize its spectral and structural properties, and its possible applications. The first part of the book covers the basic properties of semiconductors, including causes of the size dependence of the properties, structural and electronic properties, and physical characteristics of the various forms of silicon. It presents theoretical and experimental research results as well as examples of porous silicon and quantum dots. The second part discusses the synthesis of nanosilicon, modification of the surface of nanoparticles, and properties of the resulting particles. The authors give special attention to the photoluminescence of silicon nanoparticles. The third part describes methods used for studying and controlling the structure and properties of nanocrystalline silicon. These methods include standard ones, such as electron microscopy, spectroscopy, and diffraction, as well as novel techniques, such as femtosecond spectroscopy, ultrafast electron nanocrystallography, and dynamic transmission electron microscopy. The fourth part details some of the practical applications of nanocrystalline silicon, including the use of nanoparticles as additives-absorbers of UV radiation in sunscreens. Incorporating much of the authors' own extensive research results, this book provides a systematic account of the scientific problems of nanosilicon and its potential practical applications. It will help readers understand current and emerging applications and research methods of this unique material

Temperature Dependence of the Resonant Magnetoelectric Effect in Layered Heterostructures

The dependence of the resonant direct magnetoelectric effect on temperature is studied experimentally in planar composite structures. Samples of rectangular shapes with dimensions of 5 mm × 20 mm employed ferromagnetic layers of either an amorphous (metallic glass) alloy or nickel with a thickness of 20–200 μm and piezoelectric layers of single crystalline langatate material or lead zirconate titanate piezoelectric ceramics with a thickness of 500 μm. The temperature of the samples was varied in a range between 120 and 390 K by blowing a gaseous nitrogen stream around them. It is shown that the effective characteristics of the magnetoelectric effect—such as the mechanical resonance frequency fr, the quality factor Q and the magnitude of the magnetoelectric coefficient αE at the resonance frequency—are contingent on temperature. The interrelations between the temperature changes of the characteristics of the magnetoelectric effect and the temperature variations of the following material parameters—Young’s modulus Y, the acoustic quality factor of individual layers, the dielectric constant ε, the piezoelectric modulus d of the piezoelectric layer as well as the piezomagnetic coefficients λ(n) of the ferromagnetic layer—are established. The effect of temperature on the characteristics of the nonlinear magnetoelectric effect is observed for the first time. The results can be useful for designing magnetoelectric heterostructures with specified temperature characteristics, in particular, for the development of thermally stabilized magnetoelectric devices