224 research outputs found
Improved thermoelectric properties in ceramic composites based on Ca3Co4O9 and Na2Ca2Nb4O13
The oxide materials Ca3Co4O9 and Na2Ca2Nb4O13 were combined in a new ceramic composite with promising synergistic thermoelectric properties. Both compounds show a plate-like crystal shape and similar aspect ratios but the matrix material Ca3Co4O9 with lateral sizes of less than 500 nm is about two orders of magnitude smaller. Uniaxial pressing of the mixed compound powders was used to produce porous ceramics after conventional sintering. Reactions between both compounds and their compositions were thoroughly investigated. In comparison to pure Ca3Co4O9, mixing with low amounts of Na2Ca2Nb4O13 proved to be beneficial for the overall thermoelectric properties. A maximum figure-of-merit of zT = 0.32 at 1073 K and therefore an improvement of about 19% was achieved by the ceramic composites
Access to metastable complex ion conductors via mechanosynthesis: Preparation, microstructure and conductivity of (Ba,Sr)LiF3 with inverse perovskite structure
Highly metastable Ba1âxSrxLiF3 (0 < x ⤠xmax â 0.4) with an inverse perovskite structure analogous to that of BaLiF3 was synthesized by soft mechanical treatment of BaF2 and LiF together with SrF2 at ambient temperature. Ex as well as in situX-ray powder diffraction (XRPD) measurements show that heat treatment at 393 K initiates the decomposition of the mixed phase into BaLiF3, LiF and (Sr,Ba)F2. Structural details of the metastable compound (Ba,Sr)LiF3 were investigated by ultrafast 19F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Interestingly, five magnetically inequivalent F sites were identified which correspond to fluorine anions coordinated by a variable number of Ba and Sr cations, respectively. Details from XRPD and NMR spectroscopy are discussed with respect to the formation mechanisms and thermal stability of the as prepared fluorides. Impedance spectroscopy is used to characterize (long-range) ionic transport properties. Results are compared with those obtained recently on mechanosynthesized BaLiF3
SolâGel-Process-Based Molten-Flux Synthesis of Plate-like La2NiO4+δ Particles
La2NiO4+δ particles with a plate-like morphology were prepared from a NaOH melt by molten-flux synthesis. For this purpose, the intermediates from a solâgel process were used as reactants. Using powder X-ray diffraction, the solâgel intermediates were identified as a mixture of tetragonal La2O2CO3 and cubic NiO. The existence of NiO was also confirmed by transmission electron microscopy in combination with electron-energy loss spectroscopy. The ultrafine mixed solâgel intermediates were then mixed with NaOH powder and additional water in a nickel crucible and heated to 673 K for 8 h. The chemical reactions in the air during the molten-flux synthesis and the influence of the salt on the formation of La2NiO4+δ were examined by thermogravimetric analysis. The powder X-ray diffraction indicated a K2NiF4-type tetragonal structure with the I4/mmm space group for the reaction product. The scanning electron microscopy showed plate-like La2NiO4+δ crystals with a length and thickness of approximately 9 Âľm and 2 Âľm, respectively, while the energy-dispersive X-ray spectroscopy revealed a homogeneous distribution of lanthanum and nickel in the product powder. The influence of the processing parameters on the product generation, as well as on the size and morphology of the La2NiO4+δ particles, was systematically studied
Mechanochemical synthesis of nanocrystalline lead selenide
Mechanochemical synthesis of lead selenide PbSe nanoparticles has been performed by high-energy milling of lead and selenium powder in a planetary ball mill Pulverisette 6 (Fritsch, Germany) and in an industrial eccentric vibratory mill ESM 654 (Siebtechnik GmbH, Germany). Structural properties of the synthesized lead selenide were characterized by X-ray diffraction, which confirms crystalline nature of PbSe nanoparticles (JCPDS 6-354). The average size of PbSe crystallites of 37 nm was calculated from XRD data by Williamson-Hall method. The methods of particle size distribution analysis, specific surface area measurement, scanning electron microscopy and transmission electron microscopy were used for characterization of surface, mean particle size, and morphology of PbSe. An application of industrial mill verified a possibility of the synthesis of a narrowband-gap semiconductor PbSe at ambient temperature and in a relatively short reaction time
Reaction Sintering of Ca3Co4O9 with BiCuSeO Nanosheets for High-Temperature Thermoelectric Composites
Ceramic composites composed of oxide materials have been synthesized by reaction sintering of Ca3Co4O9 with BiCuSeO nanosheets. In situ x-ray diffraction and thermogravimetric analyses of the compound powders were conducted to understand the phase transformations during heating up to 1173 K. Further thermogravimetric analyses investigated the thermal stability of the composites and the completion of reaction sintering. The microstructure of the formed phases after reaction sintering and the composition of the composites were investigated for varying mixtures. Depending on the amount of BiCuSeO used, the phases present and their composition differed, having a significant impact on the thermoelectric properties. The increase of the electrical conductivity at a simultaneously high Seebeck coefficient resulted in a large power factor of 5.4 ΟW cmâ1 Kâ2, more than twice that of pristine Ca3Co4O9
Tuning the Thermoelectric Performance of CaMnO3-Based Ceramics by Controlled Exsolution and Microstructuring
The thermoelectric properties of CaMnO3-δ/CaMn2O4 composites were tuned via microstructuring and compositional adjustment. Single-phase rock-salt-structured CaO-MnO materials with Ca:Mn ratios larger than unity were produced in reducing atmosphere and subsequently densified by spark plasma sintering in vacuum. Annealing in air at 1340 °C between 1 and 24 h activated redox-driven exsolution and resulted in a variation in microstructure and CaMnO3-δ materials with 10 and 15 vol % CaMn2O4, respectively. The nature of the CaMnO3-δ/CaMn2O4 grain boundary was analyzed by transmission electron microscopy on short- and long-term annealed samples, and a sharp interface with no secondary phase formation was indicated in both cases. This was further complemented by density functional theory (DFT) calculations, which confirmed that the CaMnO3-δ indeed is a line compound. DFT calculations predict segregation of oxygen vacancies from the bulk of CaMnO3-δ to the interface between CaMnO3-δ and CaMn2O4, resulting in an enhanced electronic conductivity of the CaMnO3-δ phase. Samples with 15 vol % CaMn2O4 annealed for 24 h reached the highest electrical conductivity of 73 S¡cm-1 at 900 °C. The lowest thermal conductivity was obtained for composites with 10 vol % CaMn2O4 annealed for 8 h, reaching 0.56 W¡m-1K-1 at 700 °C. However, the highest thermoelectric figure-of-merit, zT, was obtained for samples with 15 vol % CaMn2O4 reaching 0.11 at temperatures between 800 and 900 °C, due to the enhanced power factor above 700 °C. This work represents an approach to boost the thermoelectric performance of CaMnO3-δ based composites
Green Synthesis of Silver Nanoparticles Using Hypericum perforatum L. Aqueous Extract with the Evaluation of Its Antibacterial Activity against Clinical and Food Pathogens
The rapid development of nanotechnology and its applications in medicine has provided the perfect solution against a wide range of different microbes, especially antibiotic-resistant ones. In this study, a one-step approach was used in preparing silver nanoparticles (AgNPs) by mixing silver nitrate with hot Hypericum perforatum (St. Johnâs wort) aqueous extract under high stirring to prevent agglomeration. The formation of silver nanoparticles was monitored by continuous measurement of the surface plasma resonance spectra (UV-VIS). The effect of St. Johnâs wort aqueous extract on the formation of silver nanoparticles was evaluated and fully characterized by using different physicochemical techniques. The obtained silver nanoparticles were spherical, monodisperse, face-centered cubic (fcc) crystal structures, and the size ranges between 20 to 40 nm. They were covered with a capping layer of organic compounds considered as a nano dimension protective layer that prevents agglomeration and sedimentation. AgNPs revealed antibacterial activity against both tested Gram-positive and Gram-negative bacterial strains causing the formation of 13â32 mm inhibition zones with MIC 6.25â12.5 Âľg/mL; Escherichia coli strains were resistant to tested AgNPs. The specific growth rate of S. aureus was significantly reduced due to tested AgNPs at concentrations âĽÂ˝ MIC. AgNPs did not affect wound migration in fibroblast cell lines compared to control. Our results highlighted the potential use of AgNPs capped with plant extracts in the pharmaceutical and food industries to control bacterial pathogensâ growth; however, further studies are required to confirm their wound healing capability and their health impact must be critically evaluate
A comprehensive score reflecting memory-related fMRI activations and deactivations as potential biomarker for neurocognitive aging
Older adults and particularly those at risk for developing dementia typically show a
decline in episodic memory performance, which has been associated with altered
memory network activity detectable via functional magnetic resonance imaging
(fMRI). To quantify the degree of these alterations, a score has been developed as a
putative imaging biomarker for successful aging in memory for older adults (Functional Activity Deviations during Encoding, FADE; DĂźzel et al., Hippocampus, 2011; 21:
803â814). Here, we introduce and validate a more comprehensive version of the
FADE score, termed FADE-SAME (Similarity of Activations during Memory Encoding),
which differs from the original FADE score by considering not only activations but
also deactivations in fMRI contrasts of stimulus novelty and successful encoding, and
by taking into account the variance of young adults' activations. We computed both
scores for novelty and subsequent memory contrasts in a cohort of 217 healthy
adults, including 106 young and 111 older participants, as well as a replication cohort
of 117 young subjects. We further tested the stability and generalizability of both
scores by controlling for different MR scanners and gender, as well as by using different data sets of young adults as reference samples. Both scores showed robust agegroup-related differences for the subsequent memory contrast, and the FADE-SAME
score additionally exhibited age-group-related differences for the novelty contrast.
Furthermore, both scores correlate with behavioral measures of cognitive aging,
namely memory performance. Taken together, our results suggest that single-value
scores of memory-related fMRI responses may constitute promising biomarkers for
quantifying neurocognitive aging
Access to metastable complex ion conductors via mechanosynthesis: preparation, microstructure and conductivity of (Ba,Sr)LiF3 with inverse perovskite structure
Acyclovir for treating varicella in otherwise healthy children and adolescents: a systematic review of randomised controlled trials
BACKGROUND: Acyclovir has the potential to shorten the course of chickenpox which may result in reduced costs and morbidity. We conducted a systematic review of randomised controlled trials that evaluated acyclovir for the treatment of chickenpox in otherwise healthy children. METHODS: MEDLINE, EMBASE, and the Cochrane Library were searched. The reference lists of relevant articles were examined and primary authors and Glaxo Wellcome were contacted to identify additional trials. Two reviewers independently screened studies for inclusion, assessed study quality using the Jadad scale and allocation concealment, and extracted data. Continuous data were converted to a weighted mean difference (WMD). Overall estimates were not calculated due to differences in the age groups studied. RESULTS: Three studies were included. Methodological quality was 3 (n = 2) and 4 (n = 1) on the Jadad scale. Acyclovir was associated with a significant reduction in the number of days with fever, from -1.0 (95% CI -1.5,-0.5) to -1.3 (95% CI -2.0,-0.6). Results were inconsistent with respect to the number of days to no new lesions, the maximum number of lesions and relief of pruritis. There were no clinically important differences between acyclovir and placebo with respect to complications or adverse effects. CONCLUSION: Acyclovir appears to be effective in reducing the number of days with fever among otherwise healthy children with chickenpox. The results were inconsistent with respect to the number of days to no new lesions, the maximum number of lesions and the relief of itchiness. The clinical importance of acyclovir treatment in otherwise healthy children remains controversial
- âŚ