Manufacture of fiber-epoxy test specimens: Including associated jigs and instrumentation

Experimental work on the manufacture and strength of graphite-epoxy composites is considered. The correct data and thus a true assessment of the strength properties based on a proper and scientifically modeled test specimen with engineered design, construction, and manufacture has led to claims of a very broad spread in optimized values. Such behavior is in the main due to inadequate control during manufacture of test specimen, improper curing, and uneven scatter in the fiber orientation. The graphite fibers are strong but brittle. Even with various epoxy matrices and volume fraction, the fracture toughness is still relatively low. Graphite-epoxy prepreg tape was investigated as a sandwich construction with intermittent interlaminar bonding between the laminates in order to produce high strength, high fracture toughness composites. The quality and control of manufacture of the multilaminate test specimen blanks was emphasized. The dimensions, orientation and cure must be meticulous in order to produce the desired mix

Toughened graphite-epoxy composites exposed in near-Earth orbit for 5.8 years

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/77202/1/AIAA-26612-927.pd

Increased fracture toughness of graphite-epoxy composites through intermittent interlaminar bonding

Intermittent interlaminar bonding, which can lead to a large increase in the fracture surface area, was achieved through the introduction of thin perforated Mylar between the layers of a multi-layer continuous-filament graphite-epoxy composite. For the best optimum condition included in this study, fracture toughness was increased from about 100 kJ/sq m for untreated specimens to an average of about 500 kJ/sq m, while tensile strength dropped from 500 MPa to 400 MPa, and elastic modulus remained the same at about 75 GPa. An approximate analysis is presented to explain the observed improvement in toughness

An acoustic emission study of plastic deformation in polycrystalline aluminium

Acoustic emission experiments were performed on polycrystalline and single crystal 99.99% aluminium while undergoing tensile deformation. It was found that acoustic emission counts as a function of grain size showed a maximum value at a particular grain size. Furthermore, the slip area associated with this particular grain size corresponded to the threshold level of detectability of single dislocation slip events. The rate of decline in acoustic emission activity as grain size is increased beyond the peak value suggests that grain boundary associated dislocation sources are giving rise to the bulk of the detected acoustic emissions.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/44677/1/10853_2004_Article_BF01028325.pd

Linking Hydrothermal Geochemistry to Organismal Physiology: Physiological Versatility in Riftia pachyptila from Sedimented and Basalt-hosted Vents

Much of what is known regarding Riftia pachyptila physiology is based on the wealth of studies of tubeworms living at diffuse flows along the fast-spreading, basalt-hosted East Pacific Rise (EPR). These studies have collectively suggested that Riftia pachyptila and its chemoautotrophic symbionts are physiologically specialized, highly productive associations relying on hydrogen sulfide and oxygen to generate energy for carbon fixation, and the symbiont's nitrate reduction to ammonia for energy and biosynthesis. However, Riftia also flourish in sediment-hosted vents, which are markedly different in geochemistry than basalt-hosted systems. Here we present data from shipboard physiological studies and global quantitative proteomic analyses of Riftia pachyptila trophosome tissue recovered from tubeworms residing in the EPR and the Guaymas basin, a sedimented, hydrothermal vent field. We observed marked differences in symbiont nitrogen metabolism in both the respirometric and proteomic data. The proteomic data further suggest that Riftia associations in Guaymas may utilize different sulfur compounds for energy generation, may have an increased capacity for energy storage, and may play a role in degrading exogenous organic carbon. Together these data reveal that Riftia symbionts are far more physiologically plastic than previously considered, and that -contrary to previous assertions- Riftia do assimilate reduced nitrogen in some habitats. These observations raise new hypotheses regarding adaptations to the geochemical diversity of habitats occupied by Riftia, and the degree to which the environment influences symbiont physiology and evolution

Interfacial fracture energy and the toughness of composites

The premises upon which prevailing composite toughness theories are based are discussed in the light of observed strength variations in boron-epoxy composites with differing shear strengths of the interfacial bond. None of the extant toughness theories (pull-out, debonding, stress redistribution) successfully predicts the work of fracture of the boronepoxy system. However, incorporation of the work to create new surfaces into the total toughness analysis gives better agreement with experiment, and work of fracture predictions for other sytems, such as carbon-polyester, can also be modified. The approach is more generalized than the Outwater/Murphy debonding explanation for toughness, which in the way usually presented only applies when the filament fracture strain is greater than the matrix fracture strain. The present analysis suggests how to tailor the interfacial shear strength in order to obtain a reasonable toughness yet still maintain strengths of the order of the rule of mixtures.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/44787/1/10853_2004_Article_BF00737846.pd

Too Exposed - Reply

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/62556/1/352289b0.pd

Repetitive Orbital Damage

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/62674/1/347341a0.pd