34 research outputs found

    Flow velocity and sand loading effect on erosionā€“corrosion during liquid-solid impingement on mild steel

    Get PDF
    The presence of CO2, sand, and water in oil and gas reservoirs causes erosionā€“corrosion leading to material degradation in pipelines and fluid handling equipment that results in increasing maintenance and repair costs and a decrease in production. While the weight loss caused by erosionā€“corrosion is known to depend on flow velocity, angle of impact, sand loading and size and target material properties, field operators often limit the flow rate based on a critical corrosion velocity to protect the equipment. This study investigates the effects of sand loading and flow velocity on weight loss associated with erosionā€“corrosion in a mild steel sample using a submerged impingement jet. The weight loss by erosion, corrosion and their interaction for a flow velocity range of 10 m/s to 20 m/s and sand loading range of 300 mg/L to 600 mg/L, in a seawater environment, are presented. The results showed that the weight loss by pure erosion and erosionā€“corrosion interaction increases linearly with jet velocity and sand loading, and that erosion is dominant in all cases except at low velocity and sand loading. The scanning electron microscope (SEM) images after impingement tests were analyzed. In addition, correlations for the velocity and sand loading were derived using the design of experiment method (DOE)

    Failure analysis using X-ray computed tomography of composite sandwich panels subjected to full-scale blast loading

    Get PDF
    The tailorable mechanical properties and high strength-to-weight ratios of composite sandwich panels make them of interest to the commercial marine and naval sector, however, further investigation into their blast resilience is required. The experiments performed in this study aimed to identify whether alterations to the composite skins or core of a sandwich panel can yield improved blast resilience both in air and underwater. Underwater blast loads using 1.28 kg TNT equivalent charge at a stand-off distance of 1 m were performed on four different composite sandwich panels. Results revealed that implementing a stepwise graded density foam core, with increasing density away from the blast, reduces the deflection of the panel and damage sustained. Furthermore, the skin material affects the extent of panel deflection and damage, the lower strain to failure of carbon-fibre reinforced polymer (CFRP) skins reduces deflection but increases skin debonding. A further two panels were subjected to a 100 kg TNT air blast loading at a 15 m stand-off to compare the effect of a graded density core and the results support the underwater blast results. Future modelling of these experiments will aid the design process and should aim to include material damage mechanisms to identify the most suitable skins

    Interwell coupling effect in Si/SiGe quantum wells grown by ultra high vacuum chemical vapor deposition

    Get PDF
    Si/Si0.66Ge0.34coupled quantum well (CQW) structures with different barrier thickness of 40, 4 and 2 nm were grown on Si substrates using an ultra high vacuum chemical vapor deposition (UHV-CVD) system. The samples were characterized using high resolution x-ray diffraction (HRXRD), cross-sectional transmission electron microscopy (XTEM) and photoluminescence (PL) spectroscopy. Blue shift in PL peak energy due to interwell coupling was observed in the CQWs following increase in the Si barrier thickness. The Si/SiGe heterostructure growth process and theoretical band structure model was validated by comparing the energy of the no-phonon peak calculated by the 6 + 2-bandkĀ·pmethod with experimental PL data. Close agreement between theoretical calculations and experimental data was obtained

    Biophysics of Junctional Transmission

    No full text

    SEQUENCE OF EVENTS IN SYNAPTIC ACTIVATION OF A MOTONEURONE

    No full text

    Hypofractionated accelerated radiotherapy with concurrent chemotherapy for locally advanced squamous cell carcinoma of the head and neck

    No full text
    Purpose: To investigate the tumor control rates in locally advanced head-and-neck cancer using accelerated hypofractionated radiotherapy with chemotherapy. Methods and Materials: The data from patients with squamous cell cancer of the larynx, oropharynx, oral cavity, and hypopharynx (In national Union Against Cancer Stage II-IV), who received accelerated hypofractionated radiotherapy with chemotherapy between January 1, 1998, and April 1, 2005, were retrospectively analyzed. Two different chemotherapy schedules were used, carboplatin and methotrexate, both single agents administered on an outpatient basis. The endpoints were overall survival, local control, and disease-free survival. Results: A total of 81 patients were analyzed. The 2-year overall survival rate was 71.6% (95% confidence interval [CI], 61.5-81.8%). The 2-year disease-free survival rate was 68.6% (95% CI, 58.4-78.8%). The 2-year local control rate was 75.4% (95% CI, 65.6-85.1%). When excluding patients with Stage 11 oral cavity, larynx, and hypopharynx tumors, 68 patients remained. For these patients, the 2-year overall survival, local control, and disease-free survival rate was 67.6% (95% CI, 56.0-79.2%), 72.0% (95% CI, 61.0-83.0%), and 64.1% (95% CI, 52.6-75.7%), respectively. Conclusion: Accelerated hypofractionated radiotherapy and synchronous chemotherapy can achieve high tumor control rates while being :resource sparing and should be the subject of prospective evaluation. (c) 2007 Elsevier Inc
    corecore