Polyaniline nanostructures tuning with oxidants in interfacial polymerization system

Three kinds of nanostructured polyanilines (PANIs) were prepared through interfacial polymerization by using ammonium persulfate (APS) as a single oxidant, and APS/FeCl3, APS/K2Cr2O7 as composite oxidants, respectively. It is observed that faster formation process and higher yield of nanostructured PANIs could be achieved in the presence of FeCl3 and K2Cr2O7. The as-prepared PANIs were characterized by field emission scanning electron microscopy, ultraviolet–visible absorption spectroscopy, Fourier transform infrared and Raman spectroscopy, X-ray diffraction analysis and electrochemical measurements including cyclic voltammetry and galvanostatic charge/discharge measurement. The influence of composite oxidants on the morphology, microstructure, and electrical and electrochemical properties of PANIs was discussed. Interestingly, when APS/K2Cr2O7 was used as the composite oxidants, PANI exhibited petal-like structure with high yield of 57.35% instead of general nanofibrous morphology formed in interfacial polymerization. Compared with those nanofibrous PANIs obtained by using APS as a single oxidant or APS/FeCl3 as composite oxidants, petal-like PANIs exhibited the largest specific capacitance (692.4 F/g at scan rate of 5 mV/s) and highest cycle stability among them. It provides a new insight into the control of PANI nanostructures with high yield and energy storage ability by simply selecting suitable composite oxidants in interfacial polymerization

Effect Factor of Arsenite and Arsenate Removal by a Manufactured Material: Activated Carbon-Supported Nano-TiO2

Carbon substrate-supported nano-TiO2 (a manufactured material) was prepared in this study for arsenic removal. The removal rates of arsenic were evaluated by batch tests under several simulation conditions including pH, ionic strength, and adsorbent dosage. Results showed that As(III) and As(V) adsorption reached equilibrium within 10 hours (pH = 8 and ionic strength 0.5 mol/L). At pH = 8, maximum adsorption efficiency was discovered for the adsorbent. Removal rate was proportional to the increase in ionic strength. The removal data were satisfactorily fitted to the pseudo-second-order kinetic model (R2 > 0.9990) and Freundlich equation (R2 ≥ 0.9600) for adsorption thermodynamic behaviors. New material showed more effective adsorption performance for As(V) than for As(III). It was found that 15.1800 mg/g As(V) and 13.3800 mg/g As(III) were adsorbed, respectively. In addition, material properties were studied including the structure of crystallinity, surface morphology, functional groups, and surface texture by XRD, TEM/SEM, FTIR, and BET methods, respectively. XRD result showed supported nano-TiO2 had the anatase phase. The size of the microparticle was around 52 nm. BET results indicated that material surface areas, pore volume, and pore size diameter were 371.17 m2/g, 0.35 cm3/g, and 11.70 nm, respectively. FTIR spectrum indicated that several functional groups (OH−, Ti-O) existing in supported nano-TiO2 may facilitate the adsorption efficiency. Mechanistically, supported nano-TiO2 played a key role in promoting adsorption efficiency and converting As(III) to As(V). Results indicated that the investigated adsorbents possessed an excellent arsenic removal capability

Heavy Metal Pollution and Ecological Assessment around the Jinsha Coal-Fired Power Plant (China)

Heavy metal pollution is a serious problem worldwide. In this study, 41 soil samples and 32 cabbage samples were collected from the area surrounding the Jinsha coal-fired power plant (JCFP Plant) in Guizhou Province, southwest China. Pb, Cd, Hg, As, Cu and Cr concentrations in soil samples and cabbage samples were analysed to study the pollution sources and risks of heavy metals around the power plant. The results indicate that the JCFP Plant contributes to the Pb, Cd, As, Hg, Cu, and Cr pollution in nearby soils, particularly Hg pollution. Cu and Cr in soils from both croplands and forestlands in the study area derive mainly from crustal materials or natural processes. Pb, Cd and As in soils from croplands arise partly through anthropogenic activities, but these elements in soils from forestlands originate mainly from crustal materials or natural processes. Hg pollution in soils from both croplands and forestlands is caused mainly by fly ash from the JCFP Plant. The cabbages grown in the study area were severely contaminated with heavy metals, and more than 90% of the cabbages had Pb concentrations exceeding the permissible level established by the Ministry of Health and the Standardization Administration of the People’s Republic of China. Additionally, 30% of the cabbages had As concentrations exceeding the permissible level. Because forests can protect soils from heavy metal pollution caused by atmospheric deposition, close attention should be given to the Hg pollution in soils and to the concentrations of Pb, As, Hg and Cr in vegetables from the study area

Transmembrane Protein LMxysn_1693 of Serovar 4h Listeria monocytogenes Is Associated with Bile Salt Resistance and Intestinal Colonization

Listeria monocytogenes (Lm) is a ubiquitous foodborne pathogen comprising of 14 serotypes, of which serovar 4h isolates belonging to hybrid sub-lineage Ⅱ exhibit hypervirulent features. LMxysn_1693 of serovar 4h Lm XYSN, a member of genomic island-7 (GI-7), is predicted to a membrane protein with unknown function, which is conserved in serovar 4h Listeria monocytogenes. Under bile salts stress, Lm XYSN strain lacking LMxysn_1693 (XYSN∆1693) exhibited a stationary phase growth defect as well as a reduction in biofilm formation and strikingly down-regulated bile-salts-resistant genes and virulent genes. Particularly, LMxysn_1693 protein plays a crucial role in Lm XYSN adhesion and invasion to intestinal epithelial cells, as well as colonization in the ileum of mice. Taken together, these findings indicate that the LMxysn_1693 gene encodes a component of the putative ABC transporter system, synthetically interacts with genes involved in bile resistance, biofilm formation and virulence, and thus contributes to Listeria monocytogenes survival within and outside the host

Single cell transcriptomics identifies a unique adipose lineage cell population that regulates bone marrow environment

Bone marrow mesenchymal lineage cells are a heterogeneous cell population involved in bone homeostasis and diseases such as osteoporosis. While it is long postulated that they originate from mesenchymal stem cells, the true identity of progenitors and their in vivo bifurcated differentiation routes into osteoblasts and adipocytes remain poorly understood. Here, by employing large scale single cell transcriptome analysis, we computationally defined mesenchymal progenitors at different stages and delineated their bi-lineage differentiation paths in young, adult and aging mice. One identified subpopulation is a unique cell type that expresses adipocyte markers but contains no lipid droplets. As non-proliferative precursors for adipocytes, they exist abundantly as pericytes and stromal cells that form a ubiquitous 3D network inside the marrow cavity. Functionally they play critical roles in maintaining marrow vasculature and suppressing bone formation. Therefore, we name them marrow adipogenic lineage precursors (MALPs) and conclude that they are a newly identified component of marrow adipose tissue