Development of Solar Biomass Drying System

The purpose of this paper focuses on the experimental pre-treatment of biomass in agricultural site using solar energy as power source and contribution of common use and efficiency solar dryer system for consumer. The main purpose of this design for solar cabinet dryer is to dry biomass via direct and indirect heating. Direct heating is the simplest method to dry biomass by exposing the biomass under direct sunlight. The solar cabinet dryer traps solar heat to increase the temperature of the drying chamber. The biomass absorbs the heat and transforms the moisture content within the biomass into water vapour and then leaves the chamber via the exhaust air outlet. This problem however can be solved by adopting indirect solar drying system. High and controllable temperatures can be achieved as a fan is used to move the air through the solar collector. This project has successfully created a solar cabinet dryer that combines both direct and indirect solar drying systems and functions to dry biomass as well as crops effectively and efficiently with minimal maintenance. Hence, it is indeed a substitution for conventional dryers which are affordable to local farmers

Effect of Welding Speed on Microstructure and Mechanical Properties due to The Deposition of Reinforcements on Friction Stir Welded Dissimilar Aluminium Alloys

The strength of the welded joint obtained by solid state stir welding process was found to be improved as compared to fusion welding process. The deposition of reinforcements during friction stir welding process can further enhance the strength of the welded joint by locking the movement of grain boundaries. In the present study, the aluminium alloys AA2024 and AA7075 were welded effectively by depositing the multi-walled carbon nanotubes in to the stir zone. The mechanical properties and microstructures were studied by varying the traverse speed at constant rotational speed. The results show that rotating tool pin stirring action and heat input play an important role in controlling the grain size. The carbon nanotubes were found to be distributed uniformly at a welding speed (traverse speed) of 80mm/min. This enhanced the mechanical properties of the welded joint. The microstructure and Electron dispersive X-ray analysis (EDX) studies indicate that the deposition of carbon nanotubes in the stir zone was influenced by the traverse speed

Effect of Welding Speed on Microstructure and Mechanical Properties due to The Deposition of Reinforcements on Friction Stir Welded Dissimilar Aluminium Alloys

The strength of the welded joint obtained by solid state stir welding process was found to be improved as compared to fusion welding process. The deposition of reinforcements during friction stir welding process can further enhance the strength of the welded joint by locking the movement of grain boundaries. In the present study, the aluminium alloys AA2024 and AA7075 were welded effectively by depositing the multi-walled carbon nanotubes in to the stir zone. The mechanical properties and microstructures were studied by varying the traverse speed at constant rotational speed. The results show that rotating tool pin stirring action and heat input play an important role in controlling the grain size. The carbon nanotubes were found to be distributed uniformly at a welding speed (traverse speed) of 80mm/min. This enhanced the mechanical properties of the welded joint. The microstructure and Electron dispersive X-ray analysis (EDX) studies indicate that the deposition of carbon nanotubes in the stir zone was influenced by the traverse speed

Modeling and Parametric Study for Maximizing Heating Value of Gasification Syngas

There are a number of experimental and theoretical studies on the energy conversion of oil palm derivative biomass. Moreover, the potential of this abundant biomass residue for renewable energy in major producing countries in Southeast Asia has been well documented. In this study, the results of an equilibrium model of downdraft gasification of oil palm fronds (OPF), developed using the Aspen Plus chemical process simulator software, and its validation are presented. In addition, an optimization of the major output parameter of importance (i.e., the higher heating value of syngas) with respect to the main operating parameters (i.e., temperature, equivalence ratio (ER), and moisture content) was performed. The response surface method (RSM) was used to determine the mathematical relationship between the response of interest, which was the heating value of syngas, and the operating conditions. This method was used to further determine the conditions that would lead to optimum higher heating values of syngas. Optimum values identified by RSM were: oxidation zone temperature of 1000 °C, moisture content in the range of 4%, and an equivalence ratio of 0.35. These optimum operating conditions and the corresponding higher heating value of syngas were found to correspond with the experimental results