263 research outputs found
Innovative mass-damping-based approaches for seismic design of tall buildings
Mass damping is a well known principle for the reduction of structural vibrations and applied in tall building design in a variety of configurations. With mass usually small (around 1% of building mass), the properly “tuned” mass damper (TMD) shows great effectiveness in reducing wind vibrations, but minor advantages under earthquake excitations. The above limitation can be surpassed by utilizing relatively large mass TMD. For this purpose, two different solutions are here proposed. In both cases, the idea is to separate the building into two or more parts, thus allowing for a relative motion between them, and activating the mass damping mechanism. In the first solution, the building is subdivided along elevation into an upper and a lower structure, separated by means of an intermediate isolation system (IIS). In the second solution, by revisiting the classical mega-frame typology, the exterior full-height structure provides the global strength and stiffness, and secondary structures, extending between two transfer levels, are physically detached from the main structure at each floor and isolated at transfer level. Simplified lumped-mass models are developed for illustrating the dynamic behaviour of the two solutions and carrying out parametric analyses. Procedures for deriving optimum values of design parameters are also proposed and compared to the parametric study
Improving the Seismic Response of Tall Buildings: From Diagrid to Megastructures and Mega-Subcontrol Systems
Background:
Diagrid structures, widely used for the tall buildings of the third millennium, are characterized by a very effective behaviour in the elastic field due
to the grid triangulation. In particular, under horizontal actions, axial forces and deformations mainly arise in the structural members of the diagrid,
thus resulting in the reduction of the shear lag effect and racking deformations. The response to incremental horizontal actions beyond the plastic
threshold, however, shows a poor plastic redistribution capacity, with consequent low values of global ductility, in spite of a significant design
overstrength.
Objective:
In this paper, it is proposed to exploit the high elastic efficiency of the diagrid type and use a vibration control system, based on mass damping
mechanism with large mass ratios, to reduce a priori the inelastic demands due to seismic actions.
Methods:
Starting from the analysis of the seismic behavior of archetype diagrid buildings, a case study is selected to assess the effectiveness of the proposed
motion-based design approach. For this purpose, the diagrid is first transformed into a megastructure (MS) configuration by densifying the
diagonal elements at the most stressed corner areas and transfer floors, suitably chosen. Then, the exterior mega-frame is detached from interior
sub-structures, thus allowing for a relative motion between the two structural portions according to a “mega-sub-structure control system” (MSCS),
which activates the mass damping mechanism.
Results:
Time-history analyses carried out on simplified lumped-mass models confirm the effectiveness of the proposed strategy in reducing the seismic
response.
Conclusion:
Finally, the practical feasibility of the MSCS and engineering solutions for the relevant structural organization are discussed
Experimental analysis of the station keeping response of a double-barge float-over system with an elastically scaled physical model
In this paper, an experimental investigation of the global response to waves relative to a newly developed float-over concept by TechnipFMC Rome Operating Center for transportation, installation and decommissioning of the off-shore platform topside is presented. A flexible scaled model of the float-over system was tested in the wave basin to determine the range of the sea-state conditions for which the response of the catamaran float-over is acceptable for mating operations. The present analysis is part of a more extensive experimental campaign which has involved also the use of a scaled rigid physical model (Dessi et al., 2016) and numerical simulations for which the collected data provide also a validation database
Multipoint temperature monitoring of microwave thermal ablation in bones through fiber bragg grating sensor arrays
Bones are a frequent site of metastases that cause intolerable cancer-related pain in 90% of patients, making their quality of life poor. In this scenario, being able to treat bone oncology patients by means of minimally invasive techniques can be crucial to avoid surgery-related risks and decrease hospitalization times. The use of microwave ablation (MWA) is gaining broad clinical acceptance to treat bone tumors. It is worth investigating temperature variations in bone tissue undergoing MWA because the clinical outcomes can be inferred from this parameter. Several feasibility studies have been performed, but an experimental analysis of the temperature trends reached into the bone during the MWA has not yet been assessed. In this work, a multi-point temperature study along the bone structure during such treatment is presented. The study has been carried out on ex vivo bovine femur and tibia, subjected to MWA. An overall of 40 measurement points covering a large sensing area was obtained for each configuration. Temperature monitoring was performed by using 40 fiber Bragg grating (FBGs) sensors (four arrays each housing 10 FBGs), inserted into the bones at specific distances to the microwave antenna. As result, the ability of this experimental multi-point monitoring approach in tracking temperature variations within bone tissue during MWA treatments was shown. This study lays the foundations for the design of a novel approach to study the effects of MWA on bone tumors. As consequence, the MWA treatment settings could be optimized in order to maximize the treatment effects of such a promising clinical application, but also customized for the specific tumor and patient
Percutaneous CT-guided microwave ablation combined with pedicle screw fixation followed by vertebroplasty (MASFVA): initial experience of a minimally invasive treatment of vertebral metastases with extension to the vertebral pedicle
Background: The aim of this study was to retrospectively evaluate the safety and efficacy of a combined CT-guided percutaneous microwave ablation (MWA) and pedicle screw fixation followed by vertebroplasty (MASFVA) for the treatment and stabilization of painful vertebral metastases with vertebral pedicle involvement. (2) Methods: from January 2013 to January 2017 11 patients with 16 vertebral metastatic lesions (7 men and 5 women; mean age, 65 +/- 11 years) with vertebral metastases underwent CT-guided microwave ablation and screw fixation followed by vertebroplasty (MASFVA). Technical success, complication rate, pain evaluation using a visual analogue scale (VAS), Oswestry Disability Index (ODI) and local tumor control were examined. (3) Results: Technical success rate was 100%. No procedure-related major complications occurred. VAS score decreased from 6.8 +/- 0.7 to 0.6 +/- 0.6. ODI score decreased from 3.1 +/- 0.7 to 1.2 +/- 0.4. All patients could walk independently without neurological complication after one week from the procedure. No new bone fractures or local disease recurrence occurred during a median follow-up of 12 months. (4) Conclusions: Our results suggest that MWA and percutaneous pedicle screw fixation followed by vertebroplasty for the treatment of painful vertebral metastases is a safe and effective procedure for painful vertebral metastases with vertebral pedicle involvement, allowing pain relief and local tumor control
The branchial Hox code and its implications for gene regulation, patterning of the nervous system and head evolution
link_to_subscribed_fulltextpublished_or_final_versio
Percutaneous Vertebral Reconstruction (PVR) Technique of Pathological Compression Fractures: An Innovative Combined Treatment of Microwave Ablation, Bilateral Expandable Titanium SpineJack Implants Followed by Vertebroplasty
Background: to retrospectively evaluate safety and efficacy of combined microwave ablation (MWA) and bilateral expandable titanium SpineJack (SJ) implants followed by vertebroplasty (VP) for the treatment of painful thoracolumbar pathological vertebral compression fracture. (2) Methods: from July 2017 to October 2022, twenty-eight patients (13 women and 15 men; mean age 68 ± 11 years) with a history of primary neoplasm and thirty-six painful vertebral metastases with vertebral compression fracture underwent combined MWA and bilateral expandable titanium SpineJack implants with vertebroplasty. We analyzed safety through complications rate, and efficacy through vertebral height restoration and pain decrease, evaluated using a visual analogue scale (VAS), and Functional Mobility Scale (FMS), and local tumor control. Contrast-enhanced CT scans were performed at 1, 3, and 6 months and a contrast-enhanced spine MRI at 6 months after the procedure. (3) Results: Technical success rate was 100%. No procedure-related major complications or death occurred. Vertebral height restoration was observed in 22 levels (58%), with a mean anterior height restoration of 2.6 mm ± 0.6 and a mean middle height restoration of 4.4 mm ± 0.6 (p < 0.001). Mean VAS score of pain evaluation on the day before treatment was 6.3 ± 1.5 (range 4–9). At the 6-month evaluation, the median VAS score for pain was 0.4 ± 0.6 (range 0–2) with a mean reduction of 93.65% (6.8 ± 0.7 vs. 0.4 ± 0.6; p < 0.000) compared with baseline evaluation. Contrast-enhanced CT scans were performed at 1, 3, and 6 months and a contrast-enhanced spine MRI was performed at 6 months after the procedure, showing no local recurrence, implant displacement, or new fractures in the treated site. (4) Conclusions: combined microwave ablation and bilateral expandable titanium SpineJack implants with vertebroplasty is a safe and effective procedure for the treatment of pathological compressive vertebral fractures. The vertebral stabilization achieved early and persistent pain relief, increasing patient mobility, improving recovery of walking capacity, and providing local tumor control
Green Tattoo Pre-Operative Renal Embolization for Robotic-Assisted and Laparoscopic Partial Nephrectomy: A Practical Proof of a New Technique
Background: Our aim is to describe a new mixed indocyanine-non-adhesive liquid embolic agent (Onyx-18) pre-operative renal embolization technique for assisted-robotic and laparoscopic partial nephrectomy with near-infra-red fluorescence imaging. (2) Methods: Thirteen patients with biopsy-proven renal tumors underwent pre-operative mixed indocyanine–ethylene vinyl alcohol (EVOH) embolization (Green-embo) between June 2021 and August 2022. All pre-operative embolizations were performed with a super selective stop-flow technique using a balloon microcatheter to deliver an indocyanine-EVOH mixture into tertiary order arterial branch feeders and the intra-lesional vascular supply. Efficacy (evaluated as complete embolization, correct tumor mapping on infra-red fluorescence imaging and clamp-off surgery) and safety (evaluated as complication rate and functional outcomes) were primary goals. Clinical and pathological data were also collected. (3) Results: Two male and eleven female patients (mean age 72 years) received pre-operative Green-embo. The median tumor size was 29 mm (range 15–50 mm). Histopathology identified renal cell carcinoma (RCC) in 9 of the 13 (69%) patients, oncocytoma in 3 of the 13 (23%) patients and sarcomatoid RCC in 1 of the 13 (8%) patients. Lesions were equally distributed between polar, meso-renal, endo- and exophytic locations. Complete embolization was achieved in all the procedures. A correct green mapping was identified during all infra-red fluorescence imaging. All patients were discharged on the second day after the surgery. The median blood loss was 145 cc (10–300 cc). No significant differences were observed in serum creatinine levels before and after the embolization procedures. (4) Conclusions: The Green-tattoo technique based on a mixed indocyanine-non-adhesive liquid embolic agent (Onyx-18) is a safe and effective pre-operative embolization technique. The main advantages are the excellent lesion mapping for fluorescence imaging, reduction in surgical time, and definitive, complete and immediate tumor devascularization based on the deep Onyx-18 penetration, leading to a very low intra-operative blood loss
Developing an infrastructure for secure patient summary exchange in the EU context: Lessons learned from the KONFIDO project
Background: The increase of healthcare digitalization comes along with potential information security risks. Thus, the EU H2020 KONFIDO project aimed to provide a toolkit supporting secure cross-border health data exchange. Methods: KONFIDO focused on the so-called “User Goals”, while also identifying barriers and facilitators regarding eHealth acceptance. Key user scenarios were elaborated both in terms of threat analysis and legal challenges. Moreover, KONFIDO developed a toolkit aiming to enhance the security of OpenNCP, the reference implementation framework. Results: The main project outcomes are highlighted and the “Lessons Learned,” the technical challenges and the EU context are detailed. Conclusions: The main “Lessons Learned” are summarized and a set of recommendations is provided, presenting the position of the KONFIDO consortium toward a robust EU-wide health data exchange infrastructure. To this end, the lack of infrastructure and technical capacity is highlighted, legal and policy challenges are identified and the need to focus on usability and semantic interoperability is emphasized. Regarding technical issues, an emphasis on transparent and standards-based development processes is recommended, especially for landmark software projects. Finally, promoting mentality change and knowledge dissemination is also identified as key step toward the development of secure cross-border health data exchange services
The European cross-border health data exchange roadmap: case study in the Italian setting
Health data exchange is a major challenge due to the sensitive information and the privacy issues entailed. Considering the European context, in which health data must be exchanged between different European Union (EU) Member States, each having a different national regulatory framework as well as different national healthcare structures, the challenge appears even greater. Europe has tried to address this challenge via the epSOS (“Smart Open Services for European Patients”) project in 2008, a European large-scale pilot on cross-border sharing of specific health data and services. The adoption of the framework is an ongoing activity, with most Member States planning its implementation by 2020. Yet, this framework is quite generic and leaves a wide space to each EU Member State regarding the definition of roles, processes, workflows and especially the specific integration with the National Infrastructures for eHealth. The aim of this paper is to present the current landscape of the evolving eHealth infrastructure for cross-border health data exchange in Europe, as a result of past and ongoing initiatives, and illustrate challenges, open issues and limitations through a specific case study describing how Italy is approaching its adoption and accommodates the identified barriers. To this end, the paper discusses ethical, regulatory and organizational issues, also focusing on technical aspects, such as interoperability and cybersecurity. Regarding cybersecurity aspects per se, we present the approach of the KONFIDO EU-funded project, which aims to reinforce trust and security in European cross-border health data exchange by leveraging novel approaches and cutting-edge technologies, such as homomorphic encryption, photonic Physical Unclonable Functions (p-PUF), a Security Information and Event Management (SIEM) system, and blockchain-based auditing. In particular, we explain how KONFIDO will test its outcomes through a dedicated pilot based on a realistic scenario, in which Italy is involved in health data exchange with other European countries
- …