238 research outputs found
Tubular occlusion prevents water-treeing and through-and-through fluid movement in a single-bottle, one-step self-etch adhesive model
Water entrapment occurs at resin-dentin interfaces of one-step self-etch adhesives. We hypothesized that by preventing water fluxes from dentin, any water entrapment would be attributed to incomplete removal of adhesive solvents. We tested this hypothesis by bonding to transparent carious dentin containing occluded dentinal tubules. An experimental single-bottle, one-step self-etch adhesive was applied to flat surfaces of caries-affected dentin surrounded by sound dentin, with or without pulpal pressure. Resin-dentin interfaces were examined with TEM after silver-impregnation. Although caries-affected dentin was highly porous, adhesive layers were devoid of silver deposits when tubules were occluded. Conversely, variable extents of water-treeing and water-droplets were identified from adhesive layers in bonded sound dentin. Water-treeing and water-droplet formation, being manifestations of evaporative and convective water fluxes, can be eliminated during bonding to occluded transparent carious dentin. However, the highly porous nature of this clinically relevant substrate after bonding may lead to potentially undesirable consequences.published_or_final_versio
Micromorphology of Resin/Dentin Interfaces Using 4th and 5th Generation Dual-curing Adhesive/Cement Systems: A Confocal Laser Scanning Microscope Analysis
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Purpose: This study evaluated the differential composition of resin/dentin interfaces of indirect restorations created by the application of 4th and 5th generation dual-curing luting systems (bonding agents/resin cements), when each material was either light cured or allowed to self-cure. Materials and Methods: Occlusal flat dentin surfaces of 60 human third molars were assigned into 12 groups (n = 5) according to curing mode and dual-curing cementing system: 4th generation All Bond2 (AB2)/Duolink (Bisco) and 5th generation (B1) Bond1/Lute-it (Pentron). Fluorescein-labeled dextran (FDx) was mixed with the bonding agents, while rhodamine-labeled dextran (RhDx) was incorporated into resin cements and Pre-Bond resin from AB2. Resin cements were applied to 2-mm-thick, precured resin composite disks (Z250, 3M ESPE), which were fixed to dentin surfaces containing adhesive resin in either cured (light cured; LC) or uncured (self-cured; SC) states. The restored teeth were light activated (XL3000, 3M ESPE) according to the manufacturers' instructions (LRC) or allowed to self-cure (SRC), were stored for 24 h, and then vertically, serially sectioned into 1-mm-thick slabs, which were analyzed using confocal laser scanning microscopy. Fluorescent additives indicated where individual components of the bonding/cement systems were located. Additional specimens were prepared and analyzed using a conventional scanning electron microscope. Results: AB2/LC and B1/LC exhibited nonuniform primer/adhesive layer thickness. AB2/SC showed adhesive resin penetration within the primed dentin, and resin cement penetration at the entrance of the dentin tubules. B1/SC/LRC demonstrated resin cement penetration within the hybrid layer and into the dentin tubules. More resin cement penetration was observed in B1/SC/SRC groups than in its LRC equivalent. Conclusion: The morphological features and component interactions among materials at resin/dentin interfaces are related to the activation modes of the primer/adhesive layer and of the resin cement used.1111526Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Medical College of Georgia School of Dentistry, Augusta, GA, USAFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)FAPESP [03/03645-0]CAPES [BEX 0184/05-5
An ORMOSIL-containing orthodontic acrylic resin with concomitant improvements in antimicrobial and fracture toughness properties
Global increase in patients seeking orthodontic treatment creates a demand for the use of acrylic resins in removable appliances and retainers. Orthodontic removable appliance wearers have a higher risk of oral infections that are caused by the formation of bacterial and fungal biofilms on the appliance surface. Here, we present the synthetic route for an antibacterial and antifungal organically-modified silicate (ORMOSIL) that has multiple methacryloloxy functionalities attached to a siloxane backbone (quaternary ammonium methacryloxy silicate, or QAMS). By dissolving the water-insoluble, rubbery ORMOSIL in methyl methacrylate, QAMS may be copolymerized with polymethyl methacrylate, and covalently incorporated in the pressure-processed acrylic resin. The latter demonstrated a predominantly contact-killing effect on Streptococcus mutans ATCC 36558 and Actinomyces naselundii ATCC 12104 biofilms, while inhibiting adhesion of Candida albicans ATCC 90028 on the acrylic surface. Apart from its favorable antimicrobial activities, QAMS-containing acrylic resins exhibited decreased water wettability and improved toughness, without adversely affecting the flexural strength and modulus, water sorption and solubility, when compared with QAMS-free acrylic resin. The covalently bound, antimicrobial orthodontic acrylic resin with improved toughness represents advancement over other experimental antimicrobial acrylic resin formulations, in its potential to simultaneously prevent oral infections during appliance wear, and improve the fracture resistance of those appliances.published_or_final_versio
Thermo-mechanical analysis of dental silicone polymers
Soft lining materials are used to replace the inner surface of a conventional complete denture, especially for weak elderly patients, with delicate health who cannot tolerate the hard acrylic denture base. Most of these patients have fragile supporting mucosa, excessive residual ridge resorption, particularly on the mandibular arch. The application of a soft liner to the mandibular denture allows absorbing impact forces during mastication and relieving oral mucosa. Actually, the silicone rubbers constitute the main family of commercialised soft lining materials. This study was conducted to understand the relationships between the mechanical properties and the physical structure of polysiloxanes. For this purpose, a series of polysiloxanes of various chemical compositions have been investigated. The evolution of their physical structure as a function of temperature has been followed by differential scanning calorimetry (DSC). In order to facilitate comparisons, the mechanical modulus has been analysed upon the same heating rate using dynamic mechanical analysis (DMA). Polysiloxanes actually commercialised as soft denture liners are three-dimensional networks: the flexibility of chains allows a crystalline organisation in an amorphous phase leading to the low value of the shear modulus. The dynamic mechanical analysis shows that they are used in the rubbery state. So, polysiloxanes have steady mechanical properties during physiological utilisation
Cytotoxic Interactive Effects of Dentin Bonding Components on Mouse Fibroblasts
Previous studies have shown a wide range of pulpal reactions to dentin bonding systems and a poor correlation between in vitro and in vivo toxicity of dentin bonding agents. Because dentin bonding agents are composed of multiple components which may diffuse through dentin, we hypothesized that these components may cause cytotoxicity through interactive (synergistic) effects. We investigated the cytotoxicities of four dentin bonding components-HEMA, Bis-GMA, TEGDMA, and UDMA-and interactive effects for three binary combinations of the dentin bonding components-HEMA and Bis-GMA, Bis-GMA and TEGDMA, and TEGDMA and UDMA. Cytotoxicities to Balb/c 3T3 mouse fibroblasts were measured by the MTT assay. Concentrations which caused 50% toxicity compared with controls (TC50 values) were compared, and the interactive effects were determined by evaluation of the differences between observed and expected MTT activities of the cells. The ranks of toxicity of the dentin bonding components in terms of TC50 values were as follows: Bis-GMA > UDMA > TEGDMA >>> HEMA (least toxic) after 24- and 72-hour exposures. As binary combinations, the three combinations of dentin bonding components interacted in three ways—synergism, additivism, and antagonism-which were influenced by the concentrations of both components. The longer period of exposure resulted in a significant increase in the cytotoxicity of the dentin bonding components and combinations. The findings indicate that both exposure time and the interactions between the dentin bonding components may be important parameters in determining the cytotoxicity of dentin bonding agents in vivo.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66489/2/10.1177_00220345950740091601.pd
Pre-heated dual-cured resin cements: analysis of the degree of conversion and ultimate tensile strength
Pulp Chamber Heating: An In Vitro Study Evaluating Different Light Sources and Resin Composite Layers
Polymerization shrinkage evaluation of three packable composite resins using a gas pycnometer
Silorane- and high filled-based"low-shrinkage" resin composites: shrinkage, flexural strength and modulus
Indirect Restoration Thickness and Time after Light-Activation Effects on Degree of Conversion of Resin Cement
- …