Friction and wear of a short fibre reinforced aluminium-silicon alloy

SIGLEAvailable from British Library Document Supply Centre- DSC:DX93563 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

The Sensitivity of Abradable Coating Residual Stresses to Varying Material Properties

International audienceThis paper reports recent research on abradable materials employed for aero-engine applications. Such thermal spray coatings are used extensively within the gas turbine, applied to the inner surface of compressor and turbine shroud sections, coating the periphery of the blade rotation path. The function of an abradable seal is to wear preferentially when rotating blades come into contact with it, while minimizing over-tip clearance and improving the efficiency of the engine. Thermal spraying of an abradable coating onto a substrate imparts two components of residual stress; rapid quenching stresses as the spray material cools on impact and stresses arising from differential thermal contraction. In-service thermal stresses are superimposed by the differential expansion of these bonded layers. The combination of the production and operation history will lead to thermal-mechanical fatigue damage within the abradable coating. The present paper will describe the numerical modeling and sensitivity analysis of the thermal spray process. The sensitivity of residual stresses (with varying material properties, coating/substrate thickness, Poisson's ratio, and substrate temperature) predicted by the Tsui and Clyne progressive deposition model enabled identification of performance drivers to coating integrity. Selecting material properties that minimize in-service stresses is a crucial stage in advancing future abradable performance

Process Design and Monitoring for Plasma Sprayed Abradable Coatings

Abradable coatings in compressor and high-pressure stages of gas turbines must provide specific hardness and porosity values to achieve an optimal cut-in of the blade tips. A fractional factorial experimental plan was designed to investigate the influence of the plasma spraying parameters argon flow rate, current, spraying distance and powder feed rate on these properties of magnesia spinel. Based on the results, magnesia spinel coatings with low (~400 HV0.5), medium (~600 HV0.5) and high hardness (~800 HV0.5) could be reliably manufactured. Further incursion rig tests confirmed the dependence of the rub-in behavior and abradability on the coating characteristics and process parameters, respectively. Process monitoring was also applied during plasma spraying of magnesia spinel abradables on batches of turbine components. The recorded particle characteristics and coating properties showed a good reproducibility of the spraying proces