52 research outputs found
Polarization resolved Cu -edge resonant inelastic x-ray scattering of orbital and spin excitations in NdBaCuO
High resolution resonant inelastic x-ray scattering (RIXS) has proven
particularly effective in the determination of crystal field and spin
excitations in cuprates. Its strength lies in the large Cu resonance
and in the fact that the scattering cross section follows quite closely the
single-ion model predictions, both in the insulating parent compounds and in
the superconducting doped materials. However, the spectra become increasingly
broader with (hole) doping, hence resolving and assigning spectral features has
proven challenging even with the highest energy resolution experimentally
achievable. Here we have overcome this limitation by measuring the complete
polarization dependence of the RIXS spectra as function of momentum transfer
and doping in thin films of NdBaCuO. Besides
confirming the previous assignment of and spin excitations (magnon,
bimagnon) in the antiferromagnetic insulating parent compound, we unequivocally
single out the actual spin-flip contribution at all dopings. We also
demonstrate that the softening of excitations is mainly attributed to the
shift of the peak to lower energy loss. These results provide a definitive
assessment of the RIXS spectra of cuprates and demonstrate that RIXS
measurements with full polarization control are practically feasible and highly
informative.Comment: 14 pages, 10 figure
Reflection on multilayer mirrors beam profile and coherence properties
The main advantage of Bragg reflection from a multilayer mirror as a monochromator for hard X rays, is the higher photon flux density because of the larger spectral bandpass compared with crystal lattice reflection. The main disadvantage lies in the strong modulations of the reflected beam profile. This is a major issue for micro imaging applications, where multilayer based monochromators are frequently employed to deliver high photon flux density. A subject of particular interest is the origin of the beam profile modifications, namely the irregular stripe patterns, induced by the reflection on a multilayer. For multilayer coatings in general it is known that the substrate and its surface quality significantly influence the performance of mirrors, as the coating reproduces to a certain degree the roughness and shape of the substrate. This proceedings article reviews recent experiments that indicate potential options for producing wave front preserving multilayer mirrors, as well as new details on the particular mirrors our group has extensively studied in the pas
The simultaneous measurement of energy and linear polarization of the scattered radiation in resonant inelastic soft x-ray scattering
Resonant Inelastic X-ray Scattering (RIXS) in the soft x-ray range is an
element-specific energy-loss spectroscopy used to probe the electronic and
magnetic excitations in strongly correlated solids. In the recent years, RIXS
has been progressing very quickly in terms of energy resolution and
understanding of the experimental results, but the interpretation of spectra
could further improve, sometimes decisively, from a full knowledge of the
polarization of incident and scattered photons. Here we present the first
implementation, in a high resolution RIXS spectrometer used to analyze the
scattered radiation, of a device allowing the measurement of the degree of
linear polarization. The system, based on a graded W/B4C multilayer mirror
installed in proximity of the CCD detector, has been installed on the AXES
spectrometer at the ESRF; it has been fully characterized and it has been used
for a demonstration experiment at the Cu L3 edge on a high-Tc superconducting
cuprate. The loss in efficiency suffered by the spectrometer equipped with this
test facility was a factor 17.5. We propose also a more advanced version,
suitable for a routine use on the next generation of RIXS spectrometers and
with an overall efficiency up to 10%.Comment: 26 pages, 8 figure
FMR studies of magnetic properties of Co and Fe thin films on Al 2O3 and MgO substrates
The effect of substrates on the magnetic properties has been studied for Co and Fe films both on Al2O3 (112̄0) and MgO (001) substrates by using ferromagnetic resonance techniques. For Fe(001)/MgO(001) samples the thickness dependence of the magnetocrystalline constant and of the effective magnetization values have been determined from the in-plane angular variation of the resonance field H0. Different reasons for the thickness dependencies of these parameters are discussed. For Co(111)/Al 2O3(112̄0) the angular variation of H0 exhibits an uniaxial anisotropy, for which several causes are discussed. For Co(112̄0)/MgO(100) a four-fold in-plane anisotropy was observed which is due to the twinned structure of these samples
Topological Design of Lightweight Additively Manufactured Mirrors for Space
Additive manufacturing (AM), more commonly known as 3D printing, is a commercially established technology for rapid prototyping and fabrication of bespoke intricate parts. To date, research quality mirror prototypes are being trialled using additive manufacturing, where a high quality reective surface is created in a post-processing step. One advantage of additive manufacturing for mirror fabrication is the ease to lightweight the structure: The design is no longer confined by traditional machining (mill, drill and lathe) and optimised/innovative structures can be used. The end applications of lightweight AM mirrors are broad; the motivation behind this research is low mass mirrors for space-based astronomical or Earth Observation imaging. An example of a potential application could be within nano-satellites, where volume and mass limits are critical. The research presented in this paper highlights the early stage experimental development in AM mirrors and the future innovative designs which could be applied using AM. The surface roughness on a diamond-turned AM aluminium (AlSi10Mg) mirror is presented which demonstrates the ability to achieve an average roughness of 3.6nm root mean square (RMS) measured over a 3 3 grid. A Fourier transform of the roughness data is shown which deconvolves the roughness into contributions from the diamond-turning tooling and the AM build layers. In addition, two nickel phosphorus (NiP) coated AlSi10Mg AM mirrors are compared in terms of surface form error; one mirror has a generic sandwich lightweight design at 44% the mass of a solid equivalent, prior to coating and the second mirror was lightweighted further using the finite element analysis tool topology optimisation. The surface form error indicates an improvement in peak-to-valley (PV) from 323nm to 204nm and in RMS from 83nm to 31nm for the generic and optimised lightweighting respectively while demonstrating a weight reduction between the samples of 18%. The paper concludes with a discussion of the breadth of AM design that could be applied to mirror lightweighting in the future, in particular, topology optimisation, tessellating polyhedrons and Voronoi cells are presented
Impact of plants on the diversity and activity of methylotrophs in soil
Background
Methanol is the second most abundant volatile organic compound in the atmosphere, with the majority produced as a metabolic by-product during plant growth. There is a large disparity between the estimated amount of methanol produced by plants and the amount which escapes to the atmosphere. This may be due to utilisation of methanol by plant-associated methanol-consuming bacteria (methylotrophs). The use of molecular probes has previously been effective in characterising the diversity of methylotrophs within the environment. Here, we developed and applied molecular probes in combination with stable isotope probing to identify the diversity, abundance and activity of methylotrophs in bulk and in plant-associated soils.
Results
Application of probes for methanol dehydrogenase genes (mxaF, xoxF, mdh2) in bulk and plant-associated soils revealed high levels of diversity of methylotrophic bacteria within the bulk soil, including Hyphomicrobium, Methylobacterium and members of the Comamonadaceae. The community of methylotrophic bacteria captured by this sequencing approach changed following plant growth. This shift in methylotrophic diversity was corroborated by identification of the active methylotrophs present in the soils by DNA stable isotope probing using 13C-labelled methanol. Sequencing of the 16S rRNA genes and construction of metagenomes from the 13C-labelled DNA revealed members of the Methylophilaceae as highly abundant and active in all soils examined. There was greater diversity of active members of the Methylophilaceae and Comamonadaceae and of the genus Methylobacterium in plant-associated soils compared to the bulk soil. Incubating growing pea plants in a 13CO2 atmosphere revealed that several genera of methylotrophs, as well as heterotrophic genera within the Actinomycetales, assimilated plant exudates in the pea rhizosphere.
Conclusion
In this study, we show that plant growth has a major impact on both the diversity and the activity of methanol-utilising methylotrophs in the soil environment, and thus, the study contributes significantly to efforts to balance the terrestrial methanol and carbon cycle
- …