218 research outputs found
Nanomechanical and structural properties of native cellulose under compressive stress
Cellulose is an important biopolymer with applications ranging from its use as an additive in pharmaceutical products to the development of novel smart materials. This wide applicability arises in part from its interesting mechanical properties. Here we report on the use of high pressure X-ray diffraction and Raman spectroscopy in a diamond anvil cell to determine the bulk and local elastic moduli of native cellulose. The modulus values obtained are 20 GPa for the bulk modulus and 200-355 and 15 GPa for the crystalline parts and the overall elastic (Young's) modulus, respectively. These values are consistent with those calculated from tensile measurements. Above 8 GPa, the packing of the cellulose chains within the fibers undergoes significant structural distortion, whereas the chains themselves remain largely unaffected by compression
Pressure as a limiting factor for life
Facts concerning the stability and functioning of key biomolecular components suggest that cellular life should no longer be viable above a few thousand atmospheres (200–300 MPa). However, organisms are seen to survive in the laboratory to much higher pressures, extending into the GPa or even tens of GPa ranges. This is causing main questions to be posed concerning the survival mechanisms of simple to complex organisms. Understanding the ultimate pressure survival of organisms is critical for food sterilization and agricultural products conservation technologies. On Earth the deep biosphere is limited in its extent by geothermal gradients but if life forms exist in cooler habitats elsewhere then survival to greater depths must be considered. The extent of pressure resistance and survival appears to vary greatly with the timescale of the exposure. For example, shock experiments on nanosecond timescales reveal greatly enhanced survival rates extending to higher pressure. Some organisms could survive bolide impacts thus allowing successful transport between planetary bodies. We summarize some of the main questions raised by recent results and their implications for the survival of life under extreme compression conditions and its possible extent in the laboratory and throughout the universe
Economic impact of port activity : a disaggregate analysis. The case of Antwerp
The economic impact of the port sector is usually measured at an aggregate level by indicators such as value added, employment and investment. This paper tries to define the economic relevance for the regional as well as for the national economy at a disaggregate level. It attempts to identify, quantify and locate the mutual relationships between the various port players themselves and between them and other Belgian industries. Due to a lack of information foreign trade is only tackled very briefly but the method outlined in this paper can be used to measure the national effects of changes in port activity at a detailed level. A sector analysis is made by compiling a regional (regional as geographically opposed to national, not to be mistaken for the Belgian Regions Brussels, Flanders and Wallonia) input-output table, resorting to microeconomic data: a bottom-up approach. The main customers and suppliers of the port's key players or stakeholders are identified. A geographical analysis can also be carried out by using data at a disaggregate level. Each customer or supplier can be located by means of their postcode. In so doing, the economic impact of the port is quantified, both functionally and geographically. In the case of the port of Antwerp, the results show important links between freight forwarders and agents. The geographical analysis suggests the existence of major agglomerating effects in and around the port of Antwerp, referred to as a major transhipment location point. Key words: port economics, regional input-output table, sector analysis, geographical analysis.port economics, regional input-output table, sector analysis, geographical analysis
Tolerance of Artemia to static and shock pressure loading
Hydrostatic and hydrodynamic pressure loading has been applied to unicellular organisms for a number of years due to interest from food technology and extremophile communities. There is also an emerging interest in the response of multicellular organisms to high pressure conditions. Artemia salina is one such organism. Previous experiments have shown a marked difference in the hatching rate of these organisms after exposure to different magnitudes of pressure, with hydrostatic tests showing hatching rates at pressures up to several GPa, compared to dynamic loading that resulted in comparatively low survival rates at lower pressure magnitudes. In order to begin to investigate the origin of this difference, the work presented here has focussed on the response of Artemia salina to (quasi) one-dimensional shock loading. Such experiments were carried out using the plate-impact technique in order to create a planar shock front. Artemia cysts were investigated in this manner along with freshly hatched larvae (nauplii). The nauplii and cysts were observed post-shock using optical microscopy to detect motility or hatching, respectively. Hatching rates of 18% were recorded at pressures reaching 1.5 GPa, as determined with the aid of numerical models. Subjecting Artemia to quasi-one-dimensional shock loading offers a way to more thoroughly explore the shock pressure ranges these organisms can survive
Nanomaterials: amyloids reflect their brighter side
Amyloid fibrils belong to the group of ordered nanostructures that are self-assembled from a wide range of polypeptides/proteins. Amyloids are highly rigid structures possessing a high mechanical strength. Although amyloids have been implicated in the pathogenesis of several human diseases, growing evidence indicates that amyloids may also perform native functions in host organisms. Discovery of such amyloids, referred to as functional amyloids, highlight their possible use in designing novel nanostructure materials. This review summarizes recent advances in the application of amyloids for the development of nanomaterials and prospective applications of such materials in nanotechnology and biomedicine
Water Dynamics in Shewanella oneidensis at Ambient and High Pressure using Quasi-Elastic Neutron Scattering
Quasielastic neutron scattering (QENS) is an ideal technique for studying water transport and relaxation dynamics at pico-to nanosecond timescales and at length scales relevant to cellular dimensions. Studies of high pressure dynamic effects in live organisms are needed to understand Earth's deep biosphere and biotechnology applications. Here we applied QENS to study water transport in Shewanella oneidensis at ambient (0.1 MPa) and high (200 MPa) pressure using H/D isotopic contrast experiments for normal and perdeuterated bacteria and buffer solutions to distinguish intracellular and transmembrane processes. The results indicate that intracellular water dynamics are comparable with bulk diffusion rates in aqueous fluids at ambient conditions but a significant reduction occurs in high pressure mobility. We interpret this as due to enhanced interactions with macromolecules in the nanoconfined environment. Overall diffusion rates across the cell envelope also occur at similar rates but unexpected narrowing of the QENS signal appears between momentum transfer values Q = 0.7-1.1 Å-1 corresponding to real space dimensions of 6-9 Å. The relaxation time increase can be explained by correlated dynamics of molecules passing through Aquaporin water transport complexes located within the inner or outer membrane structures
Health service discovery and composition in ambient assisted living: the Australian type 2 diabetes case study
Pressure tolerance of Artemia cysts compressed in water medium
The high pressure tolerance of cysts of Artemia salina was investigated up to several GPa in water. No survival was observed after exposure to 1.0 GPa for 15 min. After exposure to 2.0 GPa for the same time duration, the hatching rate had recovered to 33%, but decreased to 8% following compression at 7.5 GPa. This contrasts with results using Fluorinert™ as the pressure-transmitting medium where 80–88% recovery was observed. The lower survival rate in water is accompanied by swelling of the eggs, indicating that liquid H2O close to the ice-VI crystallization pressure penetrated inside the eggs. This pressure exceeds the stability limit for proteins and other key biomolecules components within the embryos that could not be resuscitated. Rehydration takes several minutes and so was not completed for all samples compressed to higher pressures, prior to ice-VI formation, resulting in renewed survival. However H2O penetration inside the shell resulted in increased mortalit
In Vivo Water Dynamics in Shewanella oneidensis Bacteria at High Pressure
Abstract: Following observations of survival of microbes and other life forms in deep subsurface environments it is necessary to understand their biological functioning under high pressure conditions. Key aspects of biochemical reactions and transport processes within cells are determined by the intracellular water dynamics. We studied water diffusion and rotational relaxation in live Shewanella oneidensis bacteria at pressures up to 500 MPa using quasi-elastic neutron scattering (QENS). The intracellular diffusion exhibits a significantly greater slowdown (by −10–30%) and an increase in rotational relaxation times (+10–40%) compared with water dynamics in the aqueous solutions used to resuspend the bacterial samples. Those results indicate both a pressure-induced viscosity increase and slowdown in ionic/macromolecular transport properties within the cells affecting the rates of metabolic and other biological processes. Our new data support emerging models for intracellular organisation with nanoscale water channels threading between macromolecular regions within a dynamically organized structure rather than a homogenous gel-like cytoplasm
Generic Mechanism of Emergence of Amyloid Protofilaments from Disordered Oligomeric aggregates
The presence of oligomeric aggregates, which is often observed during the
process of amyloid formation, has recently attracted much attention since it
has been associated with neurodegenerative conditions such as Alzheimer's and
Parkinson's diseases. We provide a description of a sequence-indepedent
mechanism by which polypeptide chains aggregate by forming metastable
oligomeric intermediate states prior to converting into fibrillar structures.
Our results illustrate how the formation of ordered arrays of hydrogen bonds
drives the formation of beta-sheets within the disordered oligomeric aggregates
that form early under the effect of hydrophobic forces. Initially individual
beta-sheets form with random orientations, which subsequently tend to align
into protofilaments as their lengths increases. Our results suggest that
amyloid aggregation represents an example of the Ostwald step rule of first
order phase transitions by showing that ordered cross-beta structures emerge
preferentially from disordered compact dynamical intermediate assemblies.Comment: 14 pages, 4 figure
- …