The Mechanism and Potential Therapeutic Effects of Cyclosporin, Cyclophilin, Probiotics and Syndecan-1 in an Animal Model of Inflammatory Bowel Disease

Background: Inflammatory bowel diseases (IBDs) have several treatment modalities including immunoregulators, like cyclosporine A, an immunosuppressant that interacts with cytoplasmic cyclophilin A, and probiotics. Aims: This study explored and compared the possible role of syndecan-1 in the IBD pathogenic process as well as the effectiveness of cyclophilin A, cyclosporine A, and their combination in the management of IBDs in the presence of probiotics. Methodology: IBD was induced in a total of 112 mice equally divided between syndecan-1 knock-out (KO) and Balb/c wild-type mice, using 2% dextran sulfate sodium (DSS) followed by intraperitoneal treatment with cyclosporine A, cyclophilin A, or a combination of both. In addition, a daily dose of probiotics was given in their drinking water. The animals were monitored for clinical signs and symptoms and checked for gross pathologies in the abdomen after 3 weeks. Descending and sigmoid colon biopsies were collected and fixed for routine microscopy or frozen for protein extraction and molecular testing for IL-6, CD3, CD147, and beta 1 integrins as well as pAkt expression. Results: The data showed that the induction of IBD in the syndecan-1 KO mice was more severe at the clinical, histological, and molecular levels than in the wild type. The combined CypA-CyA treatment showed no added inhibitory effect compared to single-drug treatment in both strains. Probiotics added to the combination was more effective in the wild type and, when used alone, its inhibition of IL-6 was the highest. As for the CD147 marker, there were more suppressions across the various groups in the KO mice except for the probiotics-alone group. Concerning CD3, it was significantly increased by the CypA-CyA complex, which led to more inflammation in the KO mice. Probiotics had little effect with the combination. In relation to beta 1 integrins, the CypA-CyA combination made no significant difference from CyA alone, and adding probiotics to the combination resulted in higher beta 1 integrin expression in the KO mice. As for pAkt, it was very well expressed and upregulated in both strains treated with DSS, but the effect was much larger in the KO mice. In brief, the CypA-CyA complex showed a decrease in the expression of pAkt, but there was no added effect of both drugs. Probiotics along with the complex had a similar reduction effects in both strains, with a greater effect in the wild-type mice, while probiotics alone led to a similar reduction in pAkt expressions in both strains. Conclusions: The differential effects of CyA, CypA, probiotics, and their combinations on the various inflammatory markers, as well as the histological alterations and clinical signs and symptoms, speak in favor of a clear role of syndecan-1 in reducing inflammation. However, probiotics need to be considered after more explorations into the mechanisms involved in the presence of CypA and CyA especially since pAkt is less active in their presence

Random close packing of polydisperse hard spheres

We study jammed configurations of hard spheres as a function of compression speed using an event-driven molecular dynamics algorithm. We find that during the compression, the pressure follows closely the metastable liquid branch until the system gets arrested into a glass state as the relaxation time exceeds the compression speed. Further compression yields a jammed configuration that can be regarded as the infinite pressure configuration of that glass state. Consequently, we find that the density of jammed packings varies from 0.638 to 0.658 for polydisperse hard spheres and from 0.635 to 0.645 for pure hard spheres upon decreasing the compression rate. This demonstrates that the density at which the systems falls out of equilibrium determines the density at which the system jams at infinite pressure. In addition, we give accurate data for the jamming density as a function of compression rate and size polydispersity.Comment: Four pages, three figure

The role of temporary accommodation buildings for post-disaster housing reconstruction

The number of houses damaged or destroyed after disasters is frequently large, and re-housing of homeless people is one of the most important tasks of reconstruction programmes. Reconstruction works often last long and during that time, it is essential to provide victims with the minimum conditions to live with dignity, privacy, and protection. This research intends to demonstrate the crucial role of temporary accommodation buildings to provide spaces where people can live and gradually resume their life until they have a permanent house. The study also aims to identify the main problems of temporary accommodation strategies and to discuss some principles and guidelines in order to reach better design solutions. It is found that temporary accommodation is an issue that goes beyond the simple provision of buildings, since the whole space for temporary settlement is important. Likewise, temporary accommodation is a process that should start before a disaster occurs, as a preventive pre-planning. In spite of being temporary constructions, these housing buildings are one of the most important elements to provide in emergency scenarios, contributing for better recovery and reconstruction actions.The first author gratefully acknowledges the financial support of Fundacao para a Ciencia e a Tecnologia, FCT, through grant SFRH/BD/73853/2010

Tracing the Evolution of Temperature in Near Fermi Energy Heavy Ion Collisions

The kinetic energy variation of emitted light clusters has been employed as a clock to explore the time evolution of the temperature for thermalizing composite systems produced in the reactions of 26A, 35A and 47A MeV $^{64}$Zn with $^{58}$Ni, $^{92}$Mo and $^{197}$Au. For each system investigated, the double isotope ratio temperature curve exhibits a high maximum apparent temperature, in the range of 10-25 MeV, at high ejectile velocity. These maximum values increase with increasing projectile energy and decrease with increasing target mass. The time at which the maximum in the temperature curve is reached ranges from 80 to 130 fm/c after contact. For each different target, the subsequent cooling curves for all three projectile energies are quite similar. Temperatures comparable to those of limiting temperature systematics are reached 30 to 40 fm/c after the times corresponding to the maxima, at a time when AMD-V transport model calculations predict entry into the final evaporative or fragmentation stage of de-excitation of the hot composite systems. Evidence for the establishment of thermal and chemical equilibrium is discussed.Comment: 9 pages, 5 figure

Influence of Yb:YAG laser beam parameters on Haynes 188 weld fusion zone microstructure and mechanical properties

The weldability of 1.2 mm thick Haynes 188 alloy sheets by a disk Yb:YAG laser welding was examined. Butt joints were made, and the influence of parameters such as power, size, and shape of the spot, welding speed, and gas flow has been investigated. Based on an iconographic correlation approach, optimum process parameters were determined. Depending on the distribution of the power density (circular or annular), acceptable welds were obtained. Powers greater than 1700 W, welding speeds higher than 3.8 m mm1, and spot sizes between 160 and 320 lm were needed in the circular (small fiber) configuration. By comparison, the annular (large fiber) configuration required a power as high as 2500 W, and a welding speed less than 3.8 m min�1. The mechanical properties of the welds depended on their shape and microstructure, which in turn depended on the welding conditions. The content of carbides, the proportion of areas consisting of cellular and dendritic substructures, and the size of these substructures were used to explain the welded joint mechanical properties

The Physics of the Colloidal Glass Transition

As one increases the concentration of a colloidal suspension, the system exhibits a dramatic increase in viscosity. Structurally, the system resembles a liquid, yet motions within the suspension are slow enough that it can be considered essentially frozen. This kinetic arrest is the colloidal glass transition. For several decades, colloids have served as a valuable model system for understanding the glass transition in molecular systems. The spatial and temporal scales involved allow these systems to be studied by a wide variety of experimental techniques. The focus of this review is the current state of understanding of the colloidal glass transition. A brief introduction is given to important experimental techniques used to study the glass transition in colloids. We describe features of colloidal systems near and in glassy states, including tremendous increases in viscosity and relaxation times, dynamical heterogeneity, and ageing, among others. We also compare and contrast the glass transition in colloids to that in molecular liquids. Other glassy systems are briefly discussed, as well as recently developed synthesis techniques that will keep these systems rich with interesting physics for years to come.Comment: 56 pages, 18 figures, Revie

On the use of MODIS EVI to assess gross primary productivity of North American ecosystems

Sherpa Romeo green journal. Permission to archive final published versionCarbon flux models based on light use efficiency (LUE), such as the MOD17 algorithm, have proved difficult to parameterize because of uncertainties in the LUE term, which is usually estimated from meteorological variables available only at large spatial scales. In search of simpler models based entirely on remote-sensing data, we examined direct relationships between the enhanced vegetation index (EVI) and gross primary productivity (GPP) measured at nine eddy covariance flux tower sites across North America. When data from the winter period of inactive photosynthesis were excluded, the overall relationship between EVI and tower GPP was better than that between MOD17 GPP and tower GPP. However, the EVI/GPP relationships vary between sites. Correlations between EVI and GPP were generally greater for deciduous than for evergreen sites. However, this correlation declined substantially only for sites with the smallest seasonal variation in EVI, suggesting that this relationship can be used for all but the most evergreen sites. Within sites dominated by either evergreen or deciduous species, seasonal variation in EVI was best explained by the severity of summer drought. Our results demonstrate that EVI alone can provide estimates of GPP that are as good as, if not better than, current versions of the MOD17 algorithm for many sites during the active period of photosynthesis. Preliminary data suggest that inclusion of other remote-sensing products in addition to EVI, such as the MODIS land surface temperature (LST), may result in more robust models of carbon balance based entirely on remote-sensing dataYe

Fast decay of a three-quasiparticle isomer in Tm-171

Incomplete-fusion reactions have been used to study high-spin states in Tm-171. Gamma rays and conversion electrons were measured using pulsed-beam conditions for enhanced isomer sensitivity. A K-pi = 19/2(+), three-quasiparticle isomer was identified, with a half-life of 1.7(2) mu s. The faster than expected transition rates from the isomer can be understood as being due to a chance near-degeneracy, with mixing between the isomeric state and the I-pi = 19/2(+) member of the one-quasiparticle rotational band to which it decays. The implied mixing matrix element is 12(2) eV