Precision cutting of glassy polymers: influence of aging on the cutting process

ABSTRACT This paper presents the results of an experimental study on the influence of aging on the cutting mechanics of glassy polymers. Polystyrene (PS), a glassy polymer, typically behaves brittle when subjected to a stress, it can be made ductile by rejuvenation. It was expected that PS would show a different cutting behaviour when it would be aged or rejuvenated. To investigate this two different molecular weight PS grades were used. Both aged and (mechanically) rejuvenated samples were made from each grade and cut. Cutting forces, chip morphology and surface quality were investigated. Although the chips showed no differences in brittleness and ductility, the measured cutting forces indicated that there is a difference between aged and rejuvenated PS. Also an interesting difference in cutting forces between the two PS grades was found. Investigation of the surface quality of the PS samples showed that the aged samples have smoother surfaces than the rejuvenated samples. It can be concluded that aging does have effect on the cutting mechanics and the obtained surface roughness

Interprofessional Consensus Regarding Design Requirements for Liquid-Based Perinatal Life Support (PLS) Technology

Liquid-based perinatal life support (PLS) technology will probably be applied in a first-in-human study within the next decade. Research and development of PLS technology should not only address technical issues, but also consider socio-ethical and legal aspects, its application area, and the corresponding design implications. This paper represents the consensus opinion of a group of healthcare professionals, designers, ethicists, researchers and patient representatives, who have expertise in tertiary obstetric and neonatal care, bio-ethics, experimental perinatal animal models for physiologic research, biomedical modeling, monitoring, and design. The aim of this paper is to provide a framework for research and development of PLS technology. These requirements are considering the possible respective user perspectives, with the aim to co-create a PLS system that facilitates physiological growth and development for extremely preterm born infants

Methyl methacrylate and respiratory sensitization: A Critical review

Methyl methacrylate (MMA) is a respiratory irritant and dermal sensitizer that has been associated with occupational asthma in a small number of case reports. Those reports have raised concern that it might be a respiratory sensitizer. To better understand that possibility, we reviewed the in silico, in chemico, in vitro, and in vivo toxicology literature, and also epidemiologic and occupational medicine reports related to the respiratory effects of MMA. Numerous in silico and in chemico studies indicate that MMA is unlikely to be a respiratory sensitizer. The few in vitro studies suggest that MMA has generally weak effects. In vivo studies have documented contact skin sensitization, nonspecific cytotoxicity, and weakly positive responses on local lymph node assay; guinea pig and mouse inhalation sensitization tests have not been performed. Cohort and cross-sectional worker studies reported irritation of eyes, nose, and upper respiratory tract associated with short-term peaks exposures, but little evidence for respiratory sensitization or asthma. Nineteen case reports described asthma, laryngitis, or hypersensitivity pneumonitis in MMA-exposed workers; however, exposures were either not well described or involved mixtures containing more reactive respiratory sensitizers and irritants.The weight of evidence, both experimental and observational, argues that MMA is not a respiratory sensitizer

Developing Novel Extensions to Support Prototyping for Interactive Social Robots

Lego Mindstorms NXT is a platform highly suitable for prototyping in the field of interactive social robotics. During a technology masterclass at Eindhoven University of Technology students from the department of Industrial Design have developed five novel extensions (sensors and actuators) for the Lego Mindstorms NXT which extend the ability of Lego to prototype for robotics even further. Applications include a water-pump, GPS sensor, wireless sensor bridge, optical mouse sensor and a magnetic grabber. In this paper we will present these extensions and showcase applications in which these extend possibilities of Lego Mindstorms NXT to a new level

Motivating arm-hand use for stroke patients by serious games

We present a novel technology to support playful rehabilitation of arm-hand performance for stroke survivors. The system combines tangible tabletop interaction with wearable technology, to encourage stroke patients to train their arm-hand skills in a task-oriented manner, while a jacket supporting tilt-sensing and vibrotactile feedback guides patients regarding the correct execution of exercises and specifically to avoid compensatory movements. We present the iterative client centered development of this technology and its on going development

Simulation-based development: shaping clinical procedures for extra-uterine life support technology

Abstract Background Research into Artificial Placenta and Artificial Womb (APAW) technology for extremely premature infants (born < 28 weeks of gestation) is currently being conducted in animal studies and shows promising results. Because of the unprecedented nature of a potential treatment and the high-risk and low incidence of occurrence, translation to the human condition is a complex task. Consequently, the obstetric procedure, the act of transferring the infant from the pregnant woman to the APAW system, has not yet been established for human patients. The use of simulation-based user-centered development allows for a safe environment in which protocols and devices can be conceptualized and tested. Our aim is to use participatory design principles in a simulation context, to gain and integrate the user perspectives in the early design phase of a protocol for this novel procedure. Methods Simulation protocols and prototypes were developed using an iterative participatory design approach; usability testing, including general and task-specific feedback, was obtained from participants with clinical expertise from a range of disciplines. The procedure made use of fetal and maternal manikins and included animations and protocol task cards. Results Physical simulation with the active participation of clinicians led to the diffusion of tacit knowledge and an iteratively formed shared understanding of the requirements and values that needed to be implemented in the procedure. At each sequel, participant input was translated into simulation protocols and design adjustments. Conclusion This work demonstrates that simulation-based participatory design can aid in shaping the future of clinical procedure and product development and rehearsing future implementation with healthcare professionals