308 research outputs found
Experimental Demonstration of Real-Time 400G Coherent Transmission over 300m OM3 MMF
We experimentally demonstrate real-time coherent transmission up to 400Gbps over 300m OM3 multimode fibers, showing resilience to connector offsets up to 3-6 µm and fiber mechanical shaking using rigorous TIA-455-203 procedures
Decision directed carrier phase estimation with a limiter for coherent dense wavelength divison multiplexing systems
Various example embodiments are disclosed. According to one example embodiment, a phase error is estimated in a series of digital symbols of a phase-modulated signal, where the signal is subject to a non-linear phase shift error due to transmission of the signal through an optical fiber. A phase correction of an instant digital symbol that succeeds the series of digital symbols is estimated, where the estimated phase correction is based on the estimated phase errors in the series of digital symbols. The estimated phase correction of the instant digital symbol is limited to a maximum absolute value, and the estimated phase correction is applied to the instant digital symbol of the signal
Monte Carlo simulations of pulse propagation in massive multichannel optical fiber communication systems
We study the combined effect of delayed Raman response and bit pattern
randomness on pulse propagation in massive multichannel optical fiber
communication systems. The propagation is described by a perturbed stochastic
nonlinear Schr\"odinger equation, which takes into account changes in pulse
amplitude and frequency as well as emission of continuous radiation. We perform
extensive numerical simulations with the model, and analyze the dynamics of the
frequency moments, the bit-error-rate, and the mutual distribution of amplitude
and position. The results of our numerical simulations are in good agreement
with theoretical predictions based on the adiabatic perturbation approach.Comment: Submitted to Physical Review E. 8 pages, 5 figure
Evaluation of Non-Linear Interference in Uncompensated Links using Raman Amplification
We extend a model for nonlinear propagation over lumped-amplified uncompensated links to setups using Raman amplification. We compare theoretical to simulative results for PM-16QAM Nyquist-WDM on PSCF links, showing an excellent agreement. We also show that Raman NLI enhancement gives limited practical impairments in realistic setup
Accurate Closed-Form Real-Time EGN Model Formula Leveraging Machine-Learning over 8500 Thoroughly Randomized Full C-Band Systems
We derived an approximate non-linear interference (NLI) closed-form model (CFM), capable of handling a very broad range of optical WDM system scenarios. We tested the CFM over 8500 randomized C-band WDM systems, of which 6250 were fully-loaded and 2250 were partially loaded. The systems had highly diversified channel formats, symbol rates, fibers, as well as other parameters. We improved the CFM accuracy by augmenting the formula with simple machine-learning factors, optimized by leveraging the system test-set. We further improved the CFM by adding a term which models special situations where NLI has high self-coherence. In the end, we obtained a very good match with the results found using the numerically-integrated Enhanced GN-model (or EGN-model). We also checked the CFM accuracy by comparing its predictions with full-C-Band split-step simulations of 300 randomized systems. The combined high accuracy and very fast computation time (milliseconds) of the CFM potentially make it an effective tool for real-time physical-layer-aware optical network management and control
16x125 Gb/s Quasi-Nyquist DAC-Generated PM-16QAM Transmission Over 3590 km of PSCF
We report on a transmission experiment over high-performance pure silica core fiber (PSCF) of 16 Nyquist wavelength-division-multiplexed (Nyquist-WDM) channels at a symbol rate of 15.625 GBaud, using polarization-multiplexed (PM) 16 symbols quadrature amplitude modulation (16QAM), resulting in a per-channel raw bit rate of 125 Gb/s. The channel spacing is 16 GHz, corresponding to 1.024 times the symbol rate. The interchannel crosstalk penalty is drastically reduced through the confinement of the signal spectrum within a near-Nyquist bandwidth, achieved with digital filtering and digital-to-analog converters (DACs) operating at 1.5 samples/symbol. The optical line is a recirculating loop composed of two spans of high-performance PSCF with erbium-doped fiber amplifiers only. The transmission distance of 3590 km at a target line bit-error rate (BER) of 1.5 10^-2 is achieved at a raw spectral efficiency (SE) of 7.81 b/s/Hz. Assuming a commercial hard forward error correction with 20.5% redundancy, capable of handling the target BER, the net SE is 6.48 b/s/Hz, the highest so far reported for multithousand kilometer transmission of PM-16QAM at ≥ 100 Gb/s per channel. These results demonstrate the feasibility of very high SE DAC-enabled ultra-long-haul quasi-Nyquist-WDM transmission using PM-16QAM with current technologies and manageable digital signal processing complexit
Evaluation of thecomputational effort for chromatic dispersion compensation in coherentoptical PM-OFDM and PM-QAM systems
Real-time monitoring of the impact of cascaded wavelength-selective switches in digital coherent receivers
A simple real-time monitoring algorithm for the impact of cascaded WSSs in elastic optical networks, which exploits the information available in a digital coherent receiver, is proposed and demonstrated through both numerical simulations and experiments
Large Eddy Simulation Requirements for the Flow over Periodic Hills
International audienceLarge eddy simulations are carried out for flows in a channel with streamwise-periodic constrictions, a well-documented benchmark case to study turbulent flow separation from a curved surface. Resolution criteria such as wall units are restricted to attached flows and enhanced criteria, such as energy spectra or two-point correlations, are used to evaluate the effective scale separation in the present large eddy simulations. A detailed analysis of the separation above the hill crest and of the early shear layer development shows that the delicate flow details in this region may be hardly resolved on coarse grids already at Re = 10595, possibly leading to a non monotonic convergence with mesh refinement. The intricate coupling between numerical and modeling errors is studied by means of various discretization schemes and subgrid models. It is shown that numerical schemes maximizing the resolution capabilities are a key ingredient for obtaining high-quality solutions while using a reduced number of grid points. On this respect, the introduction of a sharp enough filter is an essential condition for separating accurately the resolved scales from the subfilter scales and for removing ill-resolved structures. The high-resolution approach is seen to provide solutions in very good overall agreement with the available experimental data for a range of Reynolds numbers (up to 37000) without need for significant grid refinement
- …