416 research outputs found
Haptic Shared Control in Tele-Manipulation: Effects of Inaccuracies in Guidance on Task Execution
Haptic shared control is a promising approach to improve tele-manipulated task execution, by making safe and effective control actions tangible through guidance forces. In current research, these guidance forces are most often generated based on pre-generated, errorless models of the remote environment. Hence such guidance forces are exempt from the inaccuracies that can be expected in practical implementations. The goal of this research is to quantify the extent to which task execution is degraded by inaccuracies in the model on which haptic guidance forces are based. In a human-in-the-loop experiment, subjects (n = 14) performed a realistic tele-manipulated assembly task in a virtual environment. Operators were provided with various levels of haptic guidance, namely no haptic guidance (conventional tele-manipulation), haptic guidance without inaccuracies, and haptic guidance with translational inaccuracies (one large inaccuracy, in the order of magnitude of the task, and a second smaller inaccuracy). The quality of natural haptic feedback (i.e., haptic transparency) was varied between high and low to identify the operator\u27s ability to detect and cope with inaccuracies in haptic guidance. The results indicate that haptic guidance is beneficial for task execution when no inaccuracies are present in the guidance. When inaccuracies are present, this may degrade task execution, depending on the magnitude and the direction of the inaccuracy. The effect of inaccuracies on overall task performance is dominated by effects found for the Constrained Translational Movement, due to its potential for jamming. No evidence was found that a higher quality of haptic transparency helps operators to detect and cope with inaccuracies in the haptic guidance.</p
Relating reflex gain modulation in posture control to underlying neural network properties using a neuromusculoskeletal model
During posture control, reflexive feedback allows humans to efficiently compensate for unpredictable mechanical disturbances. Although reflexes are involuntary, humans can adapt their reflexive settings to the characteristics of the disturbances. Reflex modulation is commonly studied by determining reflex gains: a set of parameters that quantify the contributions of Ia, Ib and II afferents to mechanical joint behavior. Many mechanisms, like presynaptic inhibition and fusimotor drive, can account for reflex gain modulations. The goal of this study was to investigate the effects of underlying neural and sensory mechanisms on mechanical joint behavior. A neuromusculoskeletal model was built, in which a pair of muscles actuated a limb, while being controlled by a model of 2,298 spiking neurons in six pairs of spinal populations. Identical to experiments, the endpoint of the limb was disturbed with force perturbations. System identification was used to quantify the control behavior with reflex gains. A sensitivity analysis was then performed on the neuromusculoskeletal model, determining the influence of the neural, sensory and synaptic parameters on the joint dynamics. The results showed that the lumped reflex gains positively correlate to their most direct neural substrates: the velocity gain with Ia afferent velocity feedback, the positional gain with muscle stretch over II afferents and the force feedback gain with Ib afferent feedback. However, position feedback and force feedback gains show strong interactions with other neural and sensory properties. These results give important insights in the effects of neural properties on joint dynamics and in the identifiability of reflex gains in experiments
Optical Properties of Layered Superconductors near the Josephson Plasma Resonance
We study the optical properties of crystals with spatial dispersion and show
that the usual Fresnel approach becomes invalid near frequencies where the
group velocity of the wave packets inside the crystal vanishes. Near these
special frequencies the reflectivity depends on the atomic structure of the
crystal provided that disorder and dissipation are very low. This is
demonstrated explicitly by a detailed study of layered superconductors with
identical or two different alternating junctions in the frequency range near
the Josephson plasma resonance. Accounting for both inductive and charge
coupling of the intrinsic junctions, we show that multiple modes are excited
inside the crystal by the incident light, determine their relative amplitude by
the microscopic calculation of the additional boundary conditions and finally
obtain the reflectivity.
Spatial dispersion also provides a novel method to stop light pulses, which
has possible applications for quantum information processing and the artificial
creation of event horizons in a solid.Comment: 25 pages, 20 figures, submitted to Phys. Rev.
Analysis of reflex modulation with a biologically realistic neural network
In this study, a neuromusculoskeletal model was built to give insight into the mechanisms behind the modulation of reflexive feedback strength as experimentally identified in the human shoulder joint. The model is an integration of a biologically realistic neural network consisting of motoneurons and interneurons, modeling 12 populations of spinal neurons, and a one degree-of-freedom musculoskeletal model, including proprioceptors. The model could mimic the findings of human postural experiments, using presynaptic inhibition of the Ia afferents to modulate the feedback gains. In a pathological case, disabling one specific neural connection between the inhibitory interneurons and the motoneurons could mimic the experimental findings in complex regional pain syndrome patients. It is concluded that the model is a valuable tool to gain insight into the spinal contributions to human motor control. Applications lay in the fields of human motor control and neurological disorders, where hypotheses on motor dysfunction can be tested, like spasticity, clonus, and tremor
Governing infrastructure networks for a low carbon economy:co-evolution of technologies and institutions in UK electricity distribution networks
The intermuscular 3–7 Hz drive is not affected by distal proprioceptive input in myoclonus-dystonia
In dystonia, both sensory malfunctioning and an abnormal intermuscular low-frequency drive of 3–7 Hz have been found, although cause and effect are unknown. It is hypothesized that sensory processing is primarily disturbed and induces this drive. Accordingly, experimenter-controlled sensory input should be able to influence the frequency of the drive. In six genetically confirmed myoclonus-dystonia (MD) patients and six matched controls, the low-frequency drive was studied with intermuscular coherence analysis. External perturbations were applied mechanically to the wrist joint in small frequency bands (0–4, 4–8 and 8–12 Hz; ‘angle protocol) and at single frequencies (1, 5, 7 and 9 Hz; ‘torque’ protocol). The low-frequency drive was found in the neck muscles of 4 MD patients. In these patients, its frequency did not shift due to the perturbation. In the torque protocol, the externally applied frequencies could be detected in all controls and in the two patients without the common drive. The common low-frequency drive was not be affected by external perturbations in MD patients. Furthermore, the torque protocol did not induce intermuscular coherences at the applied frequencies in these patients, as was the case in healthy controls and in patients without the drive. This suggests that the dystonic 3–7 Hz drive is caused by a sensory-independent motor drive and sensory malfunctioning in MD might rather be a consequence than a cause of dystonia
A rigorous model of reflex function indicates that position and force feedback are flexibly tuned to position and force tasks
This study aims to quantify the separate contributions of muscle force feedback, muscle spindle activity and co-contraction to the performance of voluntary tasks (“reduce the influence of perturbations on maintained force or position”). Most human motion control studies either isolate only one contributor, or assume that relevant reflexive feedback pathways during voluntary disturbance rejection tasks originate mainly from the muscle spindle. Human ankle-control experiments were performed, using three task instructions and three perturbation characteristics to evoke a wide range of responses to force perturbations. During position tasks, subjects (n = 10) resisted the perturbations, becoming more stiff than when being relaxed (i.e., the relax task). During force tasks, subjects were instructed to minimize force changes and actively gave way to imposed forces, thus becoming more compliant than during relax tasks. Subsequently, linear physiological models were fitted to the experimental data. Inhibitory, as well as excitatory force feedback, was needed to account for the full range of measured experimental behaviors. In conclusion, force feedback plays an important role in the studied motion control tasks (excitatory during position tasks and inhibitory during force tasks), implying that spindle-mediated feedback is not the only significant adaptive system that contributes to the maintenance of posture or force
Systematics of c-axis Phonons in the Thallium and Bismuth Based Cuprate Superconductors
We present grazing incidence reflectivity measurements in the far infrared
region at temperatures above and below Tc for a series of thallium (Tl2Ba2CuO6,
Tl2Ba2CaCu2O8) and bismuth (Bi2Sr2CuO6, Bi2Sr2CaCu2O8, and
Bi(2-x)Pb(x)Sr2CaCu2O8) based cuprate superconductors. From the spectra, which
are dominated by the c-axis phonons, longitudinal frequencies (LO) are directly
obtained. The reflectivity curves are well fitted by a series of Lorentz
oscillators. In this way the transverse (TO) phonon frequencies were accurately
determined. On the basis of the comparative study of the Bi and Tl based
cuprates with different number of CuO2 layers per unit cell, we suggest
modifications of the assignment of the main oxygen modes. We compare the LO
frequencies in Bi2Sr2CaCu2O8 and Tl2Ba2Ca2Cu3O10 obtained from intrinsic
Josephson junction characteristics with our measurements, and explain the
discrepancy in LO frequencies obtained by the two different methods.Comment: 8 pages Revtex, 6 eps figures, 3 tables, to appear in Phys. Rev.
- …