Potentiometric Sensor Based on Layered Pillar[6]arene—Copper Composite

A solid-contact potentiometric sensor has been developed on the basis of glassy carbon electrode covered with electropolymerized polyaniline and alternatively layered pillar[6]arene and Cu2+ ions films. The assembly of the surface layer was confirmed by surface plasmon resonance measurements. The number of deposited layers was selected to reach better analytical characteristics for Cu2+ determination. It was shown that better results were achieved by using five layers, the upper one consisting of the macrocycle. The addition of covering layers for polyelectrolytes (Nafion, poly(styrene sulfonate)) and Cu2+ ions did not improve sensor performance. The potentiometric sensor made it possible to determine Cu2+ ions in neutral and weakly acidic media with a linear range of the concentrations, from 3.0 μM to 10.0 mM (limit of detection 3.0 μM). The applicability of the sensor in real sample assays was confirmed by the determination of Cu2+ ions in copper vitriol, Bordeaux mixture, and polyvitamin-mineral pills of “Complivit” during an atomic emission spectroscopy analysis

Effects of Bacillus Serine Proteases on the Bacterial Biofilms

Serratia marcescens is an emerging opportunistic pathogen responsible for many hospital-acquired infections including catheter-associated bacteremia and urinary tract and respiratory tract infections. Biofilm formation is one of the mechanisms employed by S. marcescens to increase its virulence and pathogenicity. Here, we have investigated the main steps of the biofilm formation by S. marcescens SR 41-8000. It was found that the biofilm growth is stimulated by the nutrient-rich environment. The time-course experiments showed that S. marcescens cells adhere to the surface of the catheter and start to produce extracellular polymeric substances (EPS) within the first 2 days of growth. After 7 days, S. marcescens biofilms maturate and consist of bacterial cells embedded in a self-produced matrix of hydrated EPS. In this study, the effect of Bacillus pumilus 3-19 proteolytic enzymes on the structure of 7-day-old S. marcescens biofilms was examined. Using quantitative methods and scanning electron microscopy for the detection of biofilm, we demonstrated a high efficacy of subtilisin-like protease and glutamyl endopeptidase in biofilm removal. Enzymatic treatment resulted in the degradation of the EPS components and significant eradication of the biofilms

NHC Polymeric Particles Obtained by Self-Assembly and Click Approach of Calix[4]Arene Amphiphiles as Support for Catalytically Active Pd Nanoclusters

A new polymeric NHC carrier was synthesized by sequential supramolecular self-assembly and copper-catalyzed azide-alkyne cycloaddition (CuAAC) of amphiphilic imidazolium calix[4]arenes with octyl lipophilic fragments. Obtained polytriazole-imidazolium particles were found as monodisperse submicron particles, with the average diameter of 236 ± 34 nm and average molecular weight of 1380 ± 96 kDa. Successful CuAAC polymerization has been proved using IR spectroscopy and high-resolution ESI mass spectrometry. Polymeric particles, as well as aggregates made from precursor macrocycles, were decorated by Pd clusters (2 nm) for further catalytic investigations. Pd nanoclusters, supported on the polymeric surface, were found highly catalytically active in the model reduction of p-nitrophenol, giving reaction rates an order of magnitude higher compared to literature examples. The reaction was recycled using the same catalyst five times without any loss of activity

Novel PEPPSI-Type NHC Pd(II) Metallosurfactants on the Base of 1H-Imidazole-4,5-dicarboxylic Acid: Synthesis and Catalysis in Water–Organic Media

Carrying out organic reactions in water has attracted much attention. Catalytic reactions in water with metallosurfactants, which have both a metallocenter and the surface activity necessary for solubilizing hydrophobic reagents, are of great demand. Herein we proposed new approach to the synthesis of NHC PEPPSI metallosurfactants based on the sequential functionalization of imidazole 4,5-dicarboxylic acid with hydrophilic oligoethylene glycol and lipophilic alkyl fragments. Complexes of different lipophilicity were obtained, and their catalytic activity was studied in model reduction and Suzuki–Miyaura reactions. A comparison was made with the commercial PEPPSI-type catalytic systems designed by Organ. It was found that the reduction reaction in an aqueous solution of the metallosurfactant with the tetradecyl lipophilic fragment was three times more active than the commercially available PEPPSI complexes, which was associated with the formation of stable monodisperse aggregates detected by DLS and TEM

Halloysite nanotubes: Controlled access and release by smart gates

Hollow halloysite nanotubes have been used as nanocontainers for loading and for the triggered release of calcium hydroxide for paper preservation. A strategy for placing end-stoppers into the tubular nanocontainer is proposed and the sustained release from the cavity is reported. The incorporation of Ca(OH)2 into the nanotube lumen, as demonstrated using transmission electron microscopy (TEM) imaging and Energy Dispersive X-ray (EDX) mapping, retards the carbonatation, delaying the reaction with CO2 gas. This effect can be further controlled by placing the end-stoppers. The obtained material is tested for paper deacidification. We prove that adding halloysite filled with Ca(OH)2 to paper can reduce the impact of acid exposure on both the mechanical performance and pH alteration. The end-stoppers have a double effect: they preserve the calcium hydroxide from carbonation, and they prevent from the formation of highly basic pH and trigger the response to acid exposure minimizing the pH drop-down. These features are promising for a composite nanoadditive in the smart protection of cellulose-based materials. \ua9 2017 by the authors. Licensee MDPI, Basel, Switzerland