An Investigation into the Bulk and Surface Phase Transformations of Bimetallic Pd-In/Al2O3 Catalyst during Reductive and Oxidative Treatments In Situ

A series of oxidative treatments of PdIn-supported intermetallic nanoparticles at different temperatures were performed. The bulk and surface structure of catalyst during phase transformation was investigated by bulk- and surface-sensitive techniques (in situ XAFS, DRIFTS of adsorbed CO). It was found that comparison of palladium and indium fractions in bulk and on the surface suggests the formation of a «core-shell» structure. According to obtained results, the core consists of In-depleted intermetallic compound or inhomogeneous bimetallic phase with the inner core of metallic Pd, when a mixture of indium oxide, metallic palladium and small part of PdIn is present on the surface

Features of the Phase Preferences, Long- and Short-Range Order in <i>Ln</i>₂(WO₄)₃ (<i>Ln</i> = Gd, Dy, Ho, Yb) with Their Relation to Hydration Behavior

The effect of synthesis conditions on the features of the long- and short-range order of Ln2(WO4)3 (Ln = Gd, Dy, Ho, Yb) powders synthesized via coprecipitation of salts has been studied by a complex of physico-chemical techniques including synchrotron X-ray powder diffraction, X-ray absorption spectroscopy, Raman and infrared spectroscopy, and simultaneous thermal analysis. It was found that crystallization of amorphous precursors begins at 600 °C/3 h and leads to the formation of the monoclinic structure with sp. gr. C12/c1(15) for Ln2(WO4)3 (Ln = Gd, Dy) and with sp. gr. P121/a1(14) for Ln = Yb, whereas crystallization of Ho precursor requires even higher temperature. After annealing at 1000 °C, the P121/a1(14) phase becomes the dominant phase component for all heavy lanthanoid types except for Ln = Gd. It was shown that the Ln (Ln = Dy, Ho, and Yb) tungstates with the P121/a1(14) monoclinic structure correspond to trihydrates Ln2(WO4)3·3H2O formed due to a rapid spontaneous hydration under ambient conditions. It was concluded that the proneness to hydration is due to a specific structure of the P121/a1(14) phase with large voids available to water molecules. Modifications in the local structure of Ln-O coordination shell accompanying the structure type change and hydration are monitored using EXAFS spectroscopy

Influence of Synthesis Conditions on the Crystal, Local Atomic, Electronic Structure, and Catalytic Properties of (Pr_1−<i>x</i>Yb_<i>x</i>)₂Zr₂O₇ (0 ≤ <i>x</i> ≤ 1) Powders

The influence of Yb3+ cations substitution for Pr3+ on the structure and catalytic activity of (Pr1−xYbx)2Zr2O7 powders synthesized via coprecipitation followed by calcination is studied using a combination of long- (s-XRD), medium- (Raman, FT-IR, and SEM-EDS) and short-range (XAFS) sensitive methods, as well as adsorption and catalytic techniques. It is established that chemical composition and calcination temperature are the two major factors that govern the phase composition, crystallographic, and local-structure parameters of these polycrystalline materials. The crystallographic and local-structure parameters of (Pr1−xYbx)2Zr2O7 samples prepared at 1400 °C/3 h demonstrate a tight correlation with their catalytic activity towards propane cracking. The progressive replacement of Pr3+ with Yb3+ cations gives rise to an increase in the catalytic activity. A mechanism of the catalytic cracking of propane is proposed, which considers the geometrical match between the metal–oxygen (Pr–O, Yb–O, and Zr–O) bond lengths within the active sites and the size of adsorbed propane molecule to be the decisive factor governing the reaction route