32,690 research outputs found
Thermal effects in InGaAs/AlAsSb quantum-cascade lasers
A quantum-cascade laser (QCL) thermal model is presented. On the basis of a finite-difference approach, the model is used in conjunction with a self-consistent carrier transport model to calculate the temperature distribution in a near-infrared InGaAs/AlAsSb QCL. The presented model is used to investigate the effects of driving conditions and device geometries on the active-region temperature, which has a major influence on the device performance. A buried heterostructure combined with epilayer-down mounting is found to offer the best performance compared with alternative structures and has thermal time constants up to eight times smaller. The presented model provides a valuable tool for understanding the thermal dynamics inside a QCL and will help to improve operating temperatures
Thermal analysis of mid-infrared quantum-cascade lasers
We present a theoretical thermal analysis of mid-infrared quantum-cascade lasers (QCLs) using a two-dimensional anisotropic heat diffusion model. Several InP-based devices are simulated over a range of operating conditions in order to extract temperature-dependent thermal resistances. These thermal resistances are used to compare the effectiveness of various heat management techniques. Finally, heat flow analysis is performed in order to understand the internal thermal dynamics of these devices
Trade and Wages: Insights from the Crystal Ball
This study uses both a net factor content analysis and a small simulation model to explore the impact on the U.S. labor market of a fivefold increase in imports of manufactured goods from developing countries. The simulation, which is parameterized by the US economy in 1990, involves a balanced trade expansion which displaces almost half of US manufacturing workers who are reemployed in the remaining manufacturing and non-trade sectors. The results show that relative wages of workers with a high school education or less would be depressed, while those with some college education would rise. However, despite the magnitude of the shock, the effects are surprisingly small. Once account is taken of productivity increases, labor force growth and export sector wage premiums, given unitary elasticities of demand and of substitution between workers with different levels of education, relative wages of workers with some college education rise by 3.5 percent, while the real wages of workers with a high school education or less decline by 1.3 percent. The impact of a variety of parameter assumptions is also explored.
The importance of electron temperature in silicon-based terahertz quantum cascade lasers
Quantum cascade lasers (QCLs) are compact sources of coherent terahertz radiation. Although all existing QCLs use III-V compound semiconductors, silicon-based devices are highly desirable due to the high thermal conductivity and mature processing technology. We use a semiclassical rate-equation model to show that Ge/SiGe THz QCL active region gain is strongly enhanced by reducing the electron temperature. We present a bound-to-continuum QCL design employing L-valley intersubband transitions, using high Ge fraction barriers to reduce interface roughness scattering, and a low electric field to reduce the electron temperature. We predict a gain of similar to 50 cm(-1), which exceeds the calculated waveguide losses. (C) 2009 American Institute of Physics. [doi: 10.1063/1.3237177
Substrate orientation and alloy composition effects in n-type SiGe quantum cascade structures
We show using a theoretical self-consistent effective mass/rate equation approach that n-type SiGe-based quantum cascade lasers are potentially made viable by either using the (111) orientation or a Ge-rich substrate
Investigation of thermal effects in quantum-cascade lasers
The development of a thermal model for quantum cascade lasers (QCLs) is presented. The model is used in conjunction with a self-consistent scattering rate calculation of the electron dynamics of an InGaAs-AlAsSb QCL to calculate the temperature distribution throughout the device which can be a limiting factor for high temperature operation. The model is used to investigate the effects of various driving conditions and device geometries, such as epilayer down bonding and buried heterostructures, on the active region temperature. It is found that buried heterostructures have a factor of eight decrease in thermal time constants compared to standard ridge waveguide structures in pulsed mode and allow a /spl sim/78% increase in heat sink temperature compared to epilayer down mounted devices in continuous-wave mode. The model presented provides a valuable tool for understanding the thermal dynamics inside a quantum cascade laser and will help to improve their operating temperatures
The structure and composition of exhumed faults, and their implications for seismic processes
Field studies of faults exhumed from seismogenic depths provide useful data to constrain seismologic models of fault zone processes and properties. Data collected on the
San Andreas Fault in the San Gabriel Mountains has shown that large-displacement faults consist of one to several very narrow slip zones embedded in a cataclastically deformed sheared region several meters thick. However these faults have not been buried to depths greater than 5 km. Fault zones in the Sierra Nevada, California allow us to study the microstructures resulting from the deformation mechanisms active at seismogenic depths. Syn-fault mineralization shows that these left-lateral strike-slip faults formed at 5-12 km depth. Detailed microstructural analyses of the small faults reveal that they evolved from
cooling joints filled by chlorite, epidote and quartz. These joints were then reactivated to form shear faults with accompanying brittle fracture and cataclastic deformation, ultimately developing very fined-grained cataclasites and ultracataclasites. The shear-induced
microstructures are developed on faults with as little as several mm of slip showing that narrow slip-surfaces develop early in the lifetime of these faults. Subsequent slip has little effect on the microstructures. The inferred similarity of deformation mechanisms in faults 10
m to 10 km long indicates that basic slip processes on the faults are scale invariant, and may be a cause for the inferred constant b-value for small earthquakes. Analysis of map-scale fault linkages and terminations indicate that linkage zones are up to 400 m wide and 1 km long, and consist of altered and fractured rocks with numerous through-going slip surfaces. Terminations are regions of numerous splay faults that have cumulative offsets approaching those of the main faults. The slip distribution and structure of the terminations and linkage zones suggest that seismic slip may propagate into these zones of enhanced toughness, and that through-going slip can occur when a sufficient linkage of faults in the zone allow slip to be transmitted
Product Measure Steady States of Generalized Zero Range Processes
We establish necessary and sufficient conditions for the existence of
factorizable steady states of the Generalized Zero Range Process. This process
allows transitions from a site to a site involving multiple particles
with rates depending on the content of the site , the direction of
movement, and the number of particles moving. We also show the sufficiency of a
similar condition for the continuous time Mass Transport Process, where the
mass at each site and the amount transferred in each transition are continuous
variables; we conjecture that this is also a necessary condition.Comment: 9 pages, LaTeX with IOP style files. v2 has minor corrections; v3 has
been rewritten for greater clarit
NICMOS Observations of Interaction Triggered Star Formation in the Luminous Infrared Galaxy NGC 6090
High resolution, 1.1, 1.6, and 2.2 micron imaging of the luminous infrared
galaxy NGC 6090 obtained with NICMOS of the Hubble Space Telescope are
presented. These new observations are centered on the two nuclei of the merger,
and reveal the spiral structure of the eastern galaxy and the amorphous nature
of the western galaxy. The nuclear separation of 3.2 kpc (H_0 = 75 km/s/Mpc)
indicates that NGC 6090 is at an intermediate stage of merging. Bright
knots/clusters are also visible in the region overlapping the merging galaxies;
four of these knots appear bluer than the underlying galaxies and have colors
consistent with young (<~ 10^7 yr) star clusters. The spatial coincidence of
the knots with the molecular gas in NGC 6090 indicates that much of the present
star formation is occuring outside of the nuclear region of merging galaxies,
consistent with recent studies of other double nuclei luminous infrared
galaxies.Comment: LaTex, 18 pages with 4 jpg figures, ApJ, in pres
- …