Series active variable geometry suspension application to comfort enhancement

This paper explores the potential of the Series Active Variable Geometry Suspension (SAVGS) for comfort and road holding enhancement. The SAVGS concept introduces significant nonlinearities associated with the rotation of the mechanical link that connects the chassis to the spring-damper unit. Although conventional linearization procedures implemented in multi-body software packages can deal with this configuration, they produce linear models of reduced applicability. To overcome this limitation, an alternative linearization approach based on energy conservation principles is proposed and successfully applied to one corner of the car, thus enabling the use of linear robust control techniques. An H∞ controller is synthesized for this simplified quarter-car linear model and tuned based on the singular value decomposition of the system's transfer matrix. The proposed control is thoroughly tested with one-corner and full-vehicle nonlinear multi-body models. In the SAVGS setup, the actuator appears in series with the passive spring-damper and therefore it would typically be categorized as a low bandwidth or slow active suspension. However, results presented in this paper for an SAVGS-retrofitted Grand Tourer show that this technology has the potential to also improve the high frequency suspension functions such as comfort and road holding

Superconductivity-Induced Anderson Localisation

We have studied the effect of a random superconducting order parameter on the localization of quasi-particles, by numerical finite size scaling of the Bogoliubov-de Gennes tight-binding Hamiltonian. Anderson localization is obtained in d=2 and a mobility edge where the states localize is observed in d=3. The critical behavior and localization exponent are universal within error bars both for real and complex random order parameter. Experimentally these results imply a suppression of the electronic contribution to thermal transport from states above the bulk energy gap.Comment: 4 pages, revtex file, 3 postscript figure

Parallel active link suspension: full car application with frequency-dependent multi-objective control strategies

In this article, a recently proposed at basic level novel suspension for road vehicles, the parallel active link suspension (PALS), is investigated in the realistic scenario of a sport utility vehicle (SUV) full car. The involved rocker-pushrod assembly is generally optimized to maximize the PALS capability in improving the suspension performance. To fully release the PALS functions of dealing with both low- and high-frequency road cases, a PID control scheme is first employed for the chassis attitude stabilization, focusing on the minimization of both the roll and pitch angles; based on a derived linear equivalent model of the PALS-retrofitted full car, an H∞ control scheme is designed to enhance the ride comfort and road holding; moreover, a frequency-dependent multiobjective control strategy that combines the developed PID and H∞ control is proposed to enable: 1) chassis attitude stabilization at 0-1 Hz; 2) vehicle vibration attenuation at 1-8 Hz; and 3) control effort penalization (for energy saving) above 10 Hz. With a group of ISO-defined road events tested, numerical simulation results demonstrate that, compared to the conventional passive suspension, the PALS has a promising potential in full-car application, with up to 70% reduction of the chassis vertical acceleration in speed bumps and chassis leveling capability of dealing with up to 4.3-m/s² lateral acceleration

Model Identification and Control for a Quarter Car Test Rig of Series Active Variable Geometry Suspension

In this paper, a quarter car test rig is utilized to perform an experimental study of the singlelink variant of the Series Active Variable Geometry Suspension (SAVGS). A nonlinear model of the test rig is identified with the use of a theoretical quarter car model and the rig’s experimental frequency response. A linear equivalent modeling method that compensates the geometric nonlinearity is also adopted to synthesize an H-infinity control scheme. The controller actively adjusts the single-link velocity in the SAVGS to improve the suspension performance. Experiments are performed to evaluate the SAVGS practical feasibility, the performance improvement, the accuracy of the nonlinear model and the controller’s robustness

Position control of parallel active link suspension with backlash

In this paper, a position control scheme for the novel Parallel Active Link Suspension (PALS) with backlash is developed to enhance the vehicle ride comfort and road holding. A PALS-retrofitted quarter car test rig is adopted, with the torque flow and backlash effect on the suspension performance analyzed. An elastic linear equivalent model of the PALS-retrofitted quarter car, which bridges the actuator position and the equivalent force between the sprung and unsprung masses, is proposed and mathematically derived, with both the geometry and backlash nonlinearities compensated. A position control scheme is then synthesized, with an outer-loop H∞ control for ride comfort and road holding enhancement and an inner-loop cascaded proportional-integral control for the reference position tracking. Experiments with the PALS-retrofitted quarter car test rig are performed over road cases of a harmonic road, a smoothed bump and frequency swept road excitation. As compared to a conventional torque control scheme, the newly proposed position control maintains the performance enhancement by the PALS, while it notably attenuates the overshoot in the actuator’s speed variation, and thereby it benefits the PALS with less power demand and less suspension deflection increment

Two Interacting Electrons in a Quasiperiodic Chain

We study numerically the effect of on-site Hubbard interaction U between two electrons in the quasiperiodic Harper's equation. In the periodic chain limit by mapping the problem to that of one electron in two dimensions with a diagonal line of impurities of strength U we demonstrate a band of resonance two particle pairing states starting from E=U. In the ballistic (metallic) regime we show explicitly interaction-assisted extended pairing states and multifractal pairing states in the diffusive (critical) regime. We also obtain localized pairing states in the gaps and the created subband due to U, whose number increases when going to the localized regime, which are responsible for reducing the velocity and the diffusion coefficient in the qualitatively similar to the non-interacting case ballistic and diffusive dynamics. In the localized regime we find propagation enhancement for small U and stronger localization for larger U, as in disordered systems.Comment: 14 pages Revtex file, 8 figures (split into 19 jpg figures). (postscript versions of the jpg figures are also available upon request) submitted to PR