3,914 research outputs found
A new concept for joining dissimilar composites
Bi-composite joint serves as interface between two dissimilar materials by interleaving plies of one composite with plies of another. This interleaving forms transition area between composites. Voids are filled in with epoxy resin to form strong, smooth transition between two materials
Satellite guidance systems in agriculture: experimental comparison between EZ-Steer/RTK and AUTOPILOT/EGNOS
The research has been conducted using two different satellite-guidance devices and two different correction systems of the GPS signal: the EZ-Steer/RTK and Autopilot/EGNOS. The machines used in the tests were the tractor New Holland T7060, the rotary harrow Alpego DG-400 and the burier Forigo DG-45, in order to determine which of the two systems ensured the best quality of work. On the basis of the results obtained it is clear that the EZ-Steer/RTK system, guarantees a lower stability of the theoretical trajectory compared to the Autopilot/EGNOS system, above 1,77%. From the elaboration of data of the two guidance systems behavior to manage the only width of transposition, it is observed that the EZ-Steer/RTK system is able to guarantee a better hold of the line compared to the Autopilot/EGNOS system, which provides a mistake of 164 cm on the total width of transposition and 2 cm on the mean value. In the matter of the normalized transposition surfaces, the Autopilot/EGNOS system ensures a better work quality
Does initial spacing influence crown and hydraulic architecture of Eucalyptus marginata?
Long-term declines in rainfall in south-western Australia have resulted in increased interest in the hydraulic characteristics of jarrah (Eucalyptus marginata Donn ex Smith) forest established in the region's drinking water catchments on rehabilitated bauxite mining sites. We hypothesized that in jarrah forest established on rehabilitated mine sites: (1) leaf area index (L) is independent of initial tree spacing; and (2) more densely planted trees have less leaf area for the same leaf mass, or the same sapwood area, and have denser sapwood. Initial stand densities ranged from about 600 to 9000 stems ha -1, and trees were 18 years old at the time of sampling. Leaf area index was unaffected by initial stand density, except in the most sparsely stocked stands where L was 1.2 compared with 2.0-2.5 in stands at other spacings. The ratio of leaf area to sapwood area (Al:As) was unaffected by tree spacing or tree size and was 0.2 at 1.3 m height and 0.25 at the crown base. There were small increases in sapwood density and decreases in leaf specific area with increased spacing. Tree diameter or basal area was a better predictor of leaf area than sapwood area. At the stand scale, basal area was a good predictor of L (r2 = 0.98, n = 15) except in the densest stands. We conclude that the hydraulic attributes of this forest type are largely independent of initial tree spacing, thus simplifying parameterization of stand and catchment water balance models. © 2008 Heron Publishing
- …