Production and characterization of polyethylene terephthalate nanoparticles

Microplastic (MP) pollution represents one of the biggest environmental problems that is further exacerbated by the continuous degradation in the marine environment of MPs to nanoplastics (NPs). The most diffuse plastics in oceans are commodity polymers, mainly thermoplastics widely used for packaging, such as polyethylene terephthalate (PET). However, the huge interest in the chemical vector role of micro/nanoplastics, their fate and negative effects on the environment and human health is still under discussion and the research is still sparse due also to the difficulties of sampling MPs and NPs from the environment or producing NPs in laboratory. Moreover, the research on MPs and NPs pollution relies on the availability of engineered nanoparticles similar to those present in the marine environment for toxicological, transport and adsorption studies in biological tissues as well as for wastewater remediation studies. This work aims to develop an easy, fast and scalable procedure for the production of representative model nanoplastics from PET pellets. The proposed method, based on a simple and economic milling process, has been optimized considering the peculiarities of the polymer. The results demonstrated the reliability of the method for preparing particle suspensions for aquatic microplastic research, with evident advantages compared to the present literature procedures, such as low cost, the absence of liquid nitrogen, the short production time, the high yield of the process, stability, reproducibility and polydisperse size distribution of the produced water dispersed nanometric PET

Fused Filament Fabrication and Computer Numerical Control Milling in Cultural Heritage Conservation

This paper reports a comparison between the advantages and disadvantages of fused filament fabrication (FFF) and computer numerical control (CNC) milling, when applied to a specific case of conservation of cultural heritage: the reproduction of four missing columns of a 17th-century tabernacle. To make the replica prototypes, European pine wood (the original material) was used for CNC milling, while polyethylene terephthalate glycol (PETG) was used for FFF printing. Neat materials were chemically and structurally characterized (FTIR, XRD, DSC, contact angle measurement, colorimetry, and bending tests) before and after artificial aging, in order to study their durability. The comparison showed that although both materials are subject to a decrease in crystallinity (an increase in amorphous bands in XRD diffractograms) and mechanical performance with aging, these characteristics are less evident in PETG (E = 1.13 +/- 0.01 GPa and sigma = 60.20 +/- 2.11 MPa after aging), which retains water repellent (ca = 95.96 +/- 5.56 degrees) and colorimetric ( increment E = 2.6) properties. Furthermore, the increase in flexural strain (%) in pine wood, from 3.71 +/- 0.03% to 4.11 +/- 0.02%, makes it not suitable for purpose. Both techniques were then used to produce the same column, showing that for this specific application CNC milling is quicker than FFF, but, at the same time, it is also much more expensive and produces a huge amount of waste material compared to FFF printing. Based on these results, it was assessed that FFF is more suitable for the replication of the specific column. For this reason, only the 3D-printed PETG column was used for the subsequent conservative restoration

Historically Accurate Reconstruction of the Materials and Conservation Technologies Used on the Facades of the Artistic Buildings in Lecce (Apulia, Italy)

The protection of the stone surfaces of the buildings of the city of Lecce (Apulia, Italy) represents an ancient practice, which has always allowed the conservation of the historical-artistic heritage of the city, which nowadays is an international touristic and cultural destination. The identification of ancient recipes, materials and methodologies for the protection of historical buildings plays an important role in establishing correct protocols in order to ensure the durability of stone surfaces over time. This work presents a historically accurate reconstruction of the materials and conservation technologies used on the facades of the artistic buildings in Lecce. Several historical buildings, both civil and religious, have been selected in order to investigate the treatments applied on their facades and to know the traditions spread in the past in the field of building conservation in the Salento territory. Thanks to non-invasive or micro-destructive techniques (optical microscopy, ATR-FTIR spectroscopy, pyrolysis–gas chromatography–mass spectrometry), the characteristic molecular markers of the materials and the products of degradation have been identified, deepening the knowledge of the mechanisms of deterioration and interaction between the stone material, the surface finish and the surrounding environment. The paper is a valuable tool for the knowledge of ancient traditions and the planning of proper restoration works

Recycling of organic fraction of municipal solid waste as an innovative precursor for the production of bio-based epoxy monomers

This paper reports the preparation of newly synthesized bio-epoxy monomers, suitable for replacing petrochemical-derived epoxy resins. An original green method able to produce epoxy monomers starting from neat carbohydrates, waste flours, and even from the organic fraction of municipal solid waste (OFMSW), was here proposed. Hence, for the first time, the epoxidation of carbohydrates was attained only through the exposition to UV and ozone radiation, without using any organic solvent to carry out the reaction. Besides the innovation in the epoxidation method, this work explored the possibility of valorizing waste materials, by recycling carbohydrate scraps; in particular, the exposition of waste flours and municipal solid waste to UV and ozone and their consequent epoxidation allowed obtaining green precursors for the production of a bio-based epoxy resin. Applicability and suitability of the synthesized compounds for epoxy monomers were investigated by curing experiments with a selected amount of a model cycloaliphatic amine-type hardener, i.e. isophorodiamine (IPDA)

Optimizing Flame Retardancy and Durability in Melamine-Formaldehyde/Solid-Urban-Waste Composite Panels

In our previous study, an innovative method for sterilization, inertization, and valorization of the organic fraction of municipal solid waste (OFMSW), to be recycled in the production of composite panels, was developed. In this follow-up work, the effects of fire retardants on fire performance, durability, and the mechanical properties of the composite panels based on OFMSW and melamine-formaldehyde resin were investigated. The performance of panels without fire retardants (control panels) was compared to panels containing either mono-ammonium phosphate (PFR) or aluminium trihydrate (ATH) at a mass fraction of 1% and 10% (modified panels). As shown by cone calorimetry, the total heat released was already low (about 31 MJ/m2 at 50 kW/m2) in the control panels, further decreased in the modified panels with the addition of fire retardants, and reached the lowest value (about 1.4 MJ/m2) with 10% mass fraction of PFR. Hence, the addition of fire retardants had a beneficial effect on the response to fire of the panels; however, it also reduced the mechanical properties of the panels as measured by flexural tests. The deterioration of the mechanical properties was particularly obvious in panels containing 10% mass fraction of fire retardants, and they were further degraded by artificial accelerated weathering, carried out by boiling tests. Ultimately, the panels containing PFR at a mass fraction of 1% offered the best balance of fire resistance, durability, and mechanical performance within the formulations investigated in this study

Rheological Tunability of Perovskite Precursor Solutions: From Spin Coating to Inkjet Printing Process

The high efficiencies (>22%) reached by perovskite-based optoelectronic devices in a very short period, demonstrates the great potential and tunability of this material. The current challenge lies in translating such efficiencies to commercially feasible forms produced through industrial fabrication methods. Herein, a novel first step towards the processability of starch-perovskite inks, developed in our previous work, is investigated, by using inkjet printing technology. The tunability of the viscosity of the starch-perovskite-based inks allows the selection of suitable concentrations to be used as printable inks. After exploration of several printing parameters, thick and opaque starch-perovskite nanocomposite films were obtained, showing interesting morphological and optical properties. The results obtained in this work underline the potential and versatility of our approach, opening the possibility to explore and optimize, in the future, further large-scale deposition methods towards fully printed and stable perovskite devices

A development of assistant surgical robot system based on surgical-operation-by-wire and hands-on-throttle-and-stick

BACKGROUND: Robot-assisted laparoscopic surgery offers several advantages compared with open surgery and conventional minimally invasive surgery. However, one issue that needs to be resolved is a collision between the robot arm and the assistant instrument. This is mostly caused by miscommunication between the surgeon and the assistant. To resolve this limitation, an assistant surgical robot system that can be simultaneously manipulated via a wireless controller is proposed to allow the surgeon to control the assistant instrument. METHODS: The system comprises two novel master interfaces (NMIs), a surgical instrument with a gripper actuated by a micromotor, and 6-axis robot arm. Two NMIs are attached to master tool manipulators of da Vinci research kit (dVRK) to control the proposed system simultaneously with patient side manipulators of dVRK. The developments of the surgical instrument and NMI are based on surgical-operation-by-wire concept and hands-on-throttle-and-stick concept from the earlier research, respectively. Tests for checking the accuracy, latency, and power consumption of the NMI are performed. The gripping force, reaction time, and durability are assessed to validate the surgical instrument. The workspace is calculated for estimating the clinical applicability. A simple peg task using the fundamentals of laparoscopic surgery board and an in vitro test are executed with three novice volunteers. RESULTS: The NMI was operated for 185 min and reflected the surgeon’s decision successfully with a mean latency of 132 ms. The gripping force of the surgical instrument was comparable to that of conventional systems and was consistent even after 1000 times of gripping motion. The reaction time was 0.4 s. The workspace was calculated to be 8397.4 cm(3). Recruited volunteers were able to execute the simple peg task within the cut-off time and successfully performed the in vitro test without any collision. CONCLUSIONS: Various experiments were conducted and it is verified that the proposed assistant surgical robot system enables collision-free and simultaneous operation of the dVRK’s robot arm and the proposed assistant robot arm. The workspace is appropriate for the performance of various kinds of surgeries. Therefore, the proposed system is expected to provide higher safety and effectiveness for the current surgical robot system

“Glass transition in thermosetting clay-nanocomposite polyurethanes”,

In thiswork nanocomposite in a polyurethane (PU) matrix, using an organically modified montmorillonite (OMM), were studied. An amount of organoclay ranging from 2% up to 6% by volume was added to the polyol component of the resin before mixing with isocyanate. The basal distance ofOMMbefore and after mixing with the polyol and after curingwas characterized by X-ray diffraction. The glass transition temperature (Tg) of PUnanocomposites, measured using differential scanning calorimeter, increases with increasing the volume fraction of OMM. On the other hand, the heat capacity increment, Cp, decreases from that the unfilled PU to that of the sample with 5.7 vol.% of OMM. Therefore the rigid amorphous fraction of the PU nanocomposites increases with increasing volume fraction of OMM. Finally, a three-phase model similar to that applied to study semi-crystalline polymers,was used to analyze the intercalation of the PU chains betweenOMMlamellae. The definition of molecular cooperativity was discussed for these systems and the characteristic length of the cooperative region was determined, using Donth equation