Microstructure and mechanical properties of Ti40Nb alloy after severe plastic deformation

The study presents the analysis of microstructure, phase composition and mechanical properties of Ti40Nb alloy exposed to severe plastic deformation. It was shown that isothermal multi-axial forging and further multi-pass rolling intensify the formation of ultra-fine grained structure in the bulk of a billet with the average element size of 0.3 ?m. Such ultra-fine grained structure considerably improves the alloy mechanical properties

Integrating GIS technologies in hydro power plant cascade simulation model

The paper presents the calculation algorithm for water-energy regime of a hydroelectric power plants cascade. The block diagram of the algorithm is given for implementing the simulation model and automating the process of calculating the regime. The proposed algorithm allows to evaluate the efficiency of the cascade, as well as to optimize the regime according to various criteria. Additionally, an option is proposed for integrating GIS monitoring data into the calculation algorithm

Comparative Investigation of the Influence of Ultrafine-Grained State on Deformation and Temperature Behavior and Microstructure Formed during Quasi-Static Tension of Pure Titanium and Ti-45Nb Alloy by Means of Infrared Thermography

A comprehensive study was performed of the deformation and temperature behavior during quasi-static tension, as well as the peculiarities of accumulation and dissipation of energy during plastic deformation. Microstructural analysis at the pre-fracture stage of pure titanium and Ti-45Nb alloy in the coarse grain (CG) and ultrafine-grained (UFG) states was also conducted. It was shown that substructural and dispersion hardening leads to a change in the regularities of dissipation and accumulation energies during deformation of the samples of the pure titanium and Ti-45Nb alloy in the UFG state. Some features of structural transformations during deformation of the pure titanium and Ti-45Nb alloy samples in the CG and UFG states were studied. A band and cellular-network and fragmented dislocation structure was formed in the case of the CG state, while large anisotropic fragments were formed in the UFG state, thus specifying a local softening of the material before fracture

Severe Plastic Deformation of Mg–Zn–Zr–Ce Alloys: Advancing Corrosion Resistance and Mechanical Strength for Medical Applications

Magnesium-based alloys hold potential for medical applications, but face challenges like rapid bioresorption and limited mechanical strength during early bone healing. In our study, we present a novel Mg–Zn–Zr–Ce alloy with low cerium content (up to 0.1 wt.% Ce) processed using two severe plastic deformation (SPD) techniques. Through an innovative combination of multiaxial forging and multipass rolling, we have achieved a fine-grained structure with an average grain size of the primary α-Mg phase of 1.0 μm. This refined microstructure exhibits improved mechanical properties, including a substantial increase in yield strength (σYS) from 130 to 240 MPa, while preserving ductility. The alloy’s composition includes α-Mg grains, cerium and zinc hydrides, and intermetallic phases with cerium and zinc elements. Tensile testing of the fine-grained alloy demonstrates an enhancement in yield strength (σYS) to 250 MPa, marking a 2.8-fold improvement over the conventional state (σYS = 90 MPa), with a modest 2-fold reduction in ductility. Crucially, electrochemical tests conducted in physiological solutions highlight substantial advancements in corrosion resistance. The corrosion current was reduced from 14 to 2 μA/cm2, while polarization resistance decreased from 3.1 to 8.1 kΩ∙cm2, underlining the alloy’s enhanced resistance to biodegradation. Our results show that the novel Mg–Zn–Zr–Ce alloy, after combined SPD, demonstrates mitigated bioresorption and enhanced mechanical properties. Our findings highlight the fact that the introduction of this innovative alloy and the application of SPD represent significant steps towards addressing the limitations of magnesium-based alloys for medical implants, offering potential improvements in safety and effectiveness

Analyzing the Deformation and Fracture of Bioinert Titanium, Zirconium and Niobium Alloys in Different Structural States by the Use of Infrared Thermography

Bioinert metals are used for medical implants and in some industrial applications. This study was performed to detect and analyze peculiarities that appear in the temperature distributions during quasi-static tensile testing of bioinert alloys. These alloys include VT1-0 titanium, Zr-1%Nb and Ti-45%Nb in both coarse-grain (CG) and ultrafine-grain (UFG) states. The crystal structure, as well as the crystal domain and grain sizes of these alloys in the UFG state, may be different from the CG versions and identifying the thermal signatures that occur during their deformation and fracture is of interest, as it may lead to an understanding of physical processes that occur during loading. By comparing the surface temperature distributions of specimens undergoing deformation under tensile loading to the distributions at maximum temperatures it was found that the observed differences depend on the alloy type, the alloy structural state and the thermal properties of structural defects in the specimen. Macro-defects were found in some specimens of VT1-0 titanium, Zr-1Nb and Ti-45Nb alloys in both the CG and UFG states. The average tensile strength of specimens containing defects was lower than that of specimens with no defects. Infrared thermography documents change in the thermal patterns of specimens as they are deformed under tensile loading and when the load stops changing or the specimen breaks

Characteristic Features of Ultrafine-Grained Ti-45 wt.% Nb Alloy under High Cycle Fatigue

The paper presents the results of fatigue-testing ultrafine-grained and coarse-grained Ti-45 wt.% Nb alloy samples under very high cycle fatigue (gigacycle regime), with the stress ratio R = −1. The ultrafine-grained (UFG) structure in the investigated alloy was formed by the two-stage SPD method, which included multidirectional forging (abc–forging) and multipass rolling in grooved rollers, with further recrystallization annealing. The UFG structure of the Ti-45 wt.% Nb alloy samples increased the fatigue limit under the high-cycle fatigue conditions up to 1.5 times compared with that of the coarse-grained (CG) samples. The infrared thermography method was applied to investigate the evolution of temperature fields in the samples under cyclic loading. Based on numerical morphology analysis, the scale invariance (the Hurst exponent) and qualitative differences for UFG and CG structures were determined. The latter resulted from the initiation and propagation of fatigue cracks in both ultra-fine grained and coarse-grained alloy samples under very high-cycle fatigue loading

Development of ultrafine-grained and nanostructured bioinert alloys based on titanium, zirconium and niobium and their microstructure, mechanical and biological properties

For this paper, studies of the microstructure as well as the mechanical and biological properties of bioinert titanium, zirconium, and niobium alloys in their nanostructured (NS) and ultrafine-grained (UFG) states have been completed. The NS and UFG states were formed by a combined two-step method of severe plastic deformation (SPD), first with multidirectional forging (MDF) or pressing into a symmetrical channel (PSC) at a given temperature regime, and then subsequent multi-pass groove rolling (MPGR) at room temperature, with pre-recrystallization annealing. Annealing increased the plasticity of the alloys in the NS and UFG states without changing the grain size. The UFG structure, with an average size of structural elements of no more than 0.3 mu m, was formed as a result of applying two-step SPD and annealing. This structure presented significant improvement in the mechanical characteristics of the alloys, in comparison with the alloys in the coarse-grained (CG) or small-grained (SG) states. At the same time, although the formation of the UFG structure leads to a significant increase in the yield strength and tensile strength of the alloys, their elastic modulus did not change. In terms of biocompatibility, the cultivation of MG-63 osteosarcoma cells on the polished and sandblasted substrates demonstrated high cell viability after 10 days and good cell adhesion to the surface