Microwave Scattering Model for a Corn Canopy

In microwave remote sensing of agricultural canopy, the capability of a scattering model to accurately predict the scattering properties is of great importance. In the literature, a "discrete scatter" approach was usually deployed, where scattering behavior of the individual constituent of the canopy was determined, and was either summed up incoherently For a dielectric cylinder of finite length, the generalized Rayleigh-Gans approximation (GRGA) is usually applied in studying its scattering behavior. It approximates the induced current in a finite cylinder by assuming infinite length. Therefore, this method is valid for a needle shaped scatterer with radius much smaller than the wavelength. For corn canopy at C band, numerical comparison of the GRGA results of the bistatic scattering coefficients for the main stalk demonstrate appreciable discrepancy with that of method of moment (MoM) results. Moreover, GRGA fails to satisfy the reciprocity theore

The Potential of Forest Biomass Inversion Based on Vegetation Indices Using Multi-Angle CHRIS/PROBA Data

Multi-angle remote sensing can either be regarded as an added source of uncertainty for variable retrieval, or as a source of additional information, which enhances variable retrieval compared to traditional single-angle observation. However, the magnitude of these angular and band effects for forest structure parameters is difficult to quantify. We used the Discrete Anisotropic Radiative Transfer (DART) model and the Zelig model to simulate the forest canopy Bidirectional Reflectance Distribution Factor (BRDF) in order to build a look-up table, and eight vegetation indices were used to assess the relationship between BRDF and forest biomass in order to find the sensitive angles and bands. Further, the European Space Agency (ESA) mission, Compact High Resolution Imaging Spectrometer onboard the Project for On-board Autonomy (CHRIS-PROBA) and field sample measurements, were selected to test the angular and band effects on forest biomass retrieval. The results showed that the off-nadir vegetation indices could predict the forest biomass more accurately than the nadir. Additionally, we found that the viewing angle effect is more important, but the band effect could not be ignored, and the sensitive angles for extracting forest biomass are greater viewing angles, especially around the hot and dark spot directions. This work highlighted the combination of angles and bands, and found a new index based on the traditional vegetation index, Atmospherically Resistant Vegetation Index (ARVI), which is calculated by combining sensitive angles and sensitive bands, such as blue band 490 nm/−55°, green band 530 nm/55°, and the red band 697 nm/55°, and the new index was tested to improve the accuracy of forest biomass retrieval. This is a step forward in multi-angle remote sensing applications for mining the hidden relationship between BRDF and forest structure information, in order to increase the utilization efficiency of remote sensing data

Mapping multiple tree species classes using a hierarchical procedure with optimized node variables and thresholds based on high spatial resolution satellite data

Tree species distribution mapping using remotely sensed data has long been an important research area. However, previous studies have rarely established a comprehensive and efficient classification procedure to obtain an accurate result. This study proposes a hierarchical classification procedure with optimized node variables and thresholds to classify tree species based on high spatial resolution satellite imagery. A classification tree structure consisting of parent and leaf nodes was designed based on user experience and visual interpretation. Spectral, textural, and topographic variables were extracted based on pre-segmented images. The random forest algorithm was used to select variables by ranking the impact of all variables. An iterating approach was used to optimize variables and thresholds in each loop by comprehensively considering the test accuracy and selected variables. The threshold range for each selected variable was determined by a statistical method considering the mean and standard deviation for two subnode types at each parent node. Classification of tree species was implemented using the optimized variables and thresholds. The results show that (1) the proposed procedure can accurately map the tree species distribution, with an overall accuracy of over 86% for both training and test stages; (2) critical variables for each class can be identified using this proposed procedure, and optimal variables of most tree plantation nodes are spectra related; (3) the overall forest classification accuracy using the proposed method is more accurate than that using the random forest (RF) and classification and regression tree (CART). The proposed approach provides results with 3.21% and 7.56% higher overall land cover classification accuracy and 4.68% and 10.28% higher overall forest classification accuracy than RF and CART, respectively

The Improved Three-Step Semi-Empirical Radiometric Terrain Correction Approach for Supervised Classification of PolSAR Data

The radiometric terrain correction (RTC) is an essential processing step for supervised classification applications of polarimetric synthetic aperture radar (PolSAR) over mountainous areas. However, the current angular variation effect (AVE) correction methods of three-step RTC processing are difficult to apply to PolSAR supervised classification because of the problem of interdependence between AVE correction and classification. To address this issue, based on the three-step semi-empirical RTC approach, we propose an improved AVE correction method suitable for the supervised classification of PolSAR. We make full use of the prior knowledge required for supervised classification and RTC processing, that is, samples and elevation data, to calculate the parameters of AVE correction by constructing a weight coefficient matrix. GaoFen-3 QPSI (C-band, quad-polarization) data were used to verify the proposed method. Experimental results showed that the proposed method is available and effective for PolSAR supervised classification. The new method can effectively remove the AVE effect in the PolSAR image, and the overall accuracy of PolSAR supervised classification can be improved about 9% compared to that without AVE correction. For the fine classification of forest types, the AVE correction can improve the classification accuracy by about 20%

Classification of Land Cover, Forest, and Tree Species Classes with ZiYuan-3 Multispectral and Stereo Data

The global availability of high spatial resolution images makes mapping tree species distribution possible for better management of forest resources. Previous research mainly focused on mapping single tree species, but information about the spatial distribution of all kinds of trees, especially plantations, is often required. This research aims to identify suitable variables and algorithms for classifying land cover, forest, and tree species. Bi-temporal ZiYuan-3 multispectral and stereo images were used. Spectral responses and textures from multispectral imagery, canopy height features from bi-temporal stereo imagery, and slope and elevation from the stereo-derived digital surface model data were examined through comparative analysis of six classification algorithms including maximum likelihood classifier (MLC), k-nearest neighbor (kNN), decision tree (DT), random forest (RF), artificial neural network (ANN), and support vector machine (SVM). The results showed that use of multiple source data—spectral bands, vegetation indices, textures, and topographic factors—considerably improved land-cover and forest classification accuracies compared to spectral bands alone, which the highest overall accuracy of 84.5% for land cover classes was from the SVM, and, of 89.2% for forest classes, was from the MLC. The combination of leaf-on and leaf-off seasonal images further improved classification accuracies by 7.8% to 15.0% for land cover classes and by 6.0% to 11.8% for forest classes compared to single season spectral image. The combination of multiple source data also improved land cover classification by 3.7% to 15.5% and forest classification by 1.0% to 12.7% compared to the spectral image alone. MLC provided better land-cover and forest classification accuracies than machine learning algorithms when spectral data alone were used. However, some machine learning approaches such as RF and SVM provided better performance than MLC when multiple data sources were used. Further addition of canopy height features into multiple source data had no or limited effects in improving land-cover or forest classification, but improved classification accuracies of some tree species such as birch and Mongolia scotch pine. Considering tree species classification, Chinese pine, Mongolia scotch pine, red pine, aspen and elm, and other broadleaf trees as having classification accuracies of over 92%, and larch and birch have relatively low accuracies of 87.3% and 84.5%. However, these high classification accuracies are from different data sources and classification algorithms, and no one classification algorithm provided the best accuracy for all tree species classes. This research implies the same data source and the classification algorithm cannot provide the best classification results for different land cover classes. It is necessary to develop a comprehensive classification procedure using an expert-based approach or hierarchical-based classification approach that can employ specific data variables and algorithm for each tree species class

Above-Ground Biomass and Biomass Components Estimation Using LiDAR Data in a Coniferous Forest

This study aims to estimate forest above-ground biomass and biomass components in a stand of Picea crassifolia (a coniferous tree) located on Qilian Mountain, western China via low density small-footprint airborne LiDAR data. LiDAR points were first classified into ground points and vegetation points. After, vegetation statistics, including height quantiles, mean height, and fractional cover were calculated. Stepwise multiple regression models were used to develop equations that relate the vegetation statistics from field inventory data with field-based estimates of biomass for each sample plot. The results showed that stem, branch, and above-ground biomass may be estimated with relatively higher accuracies; estimates have adjusted R2 values of 0.748, 0.749, and 0.727, respectively, root mean squared error (RMSE) values of 9.876, 1.520, and 15.237 Mg·ha−1, respectively, and relative RMSE values of 12.783%, 12.423%, and 14.163%, respectively. Moreover, fruit and crown biomass may be estimated with relatively high accuracies; estimates have adjusted R2 values of 0.578 and 0.648, respectively, RMSE values of 1.022 and 5.963 Mg·ha−1, respectively, and relative RMSE values of 23.273% and 19.665%, respectively. In contrast, foliage biomass estimates have relatively low accuracies; they had an adjusted R2 value of 0.356, an RMSE of 3.691 Mg·ha−1, and a relative RMSE of 26.953%. Finally, above-ground biomass and biomass component spatial maps were established using stepwise multiple regression equations. These maps are very useful for updating and modifying forest base maps and registries

Comparison of Coniferous Plantation Heights Using Unmanned Aerial Vehicle (UAV) Laser Scanning and Stereo Photogrammetry

Plantation forests play a critical role in forest products and ecosystems. Unmanned aerial vehicle (UAV) remote sensing has become a promising technology in forest related applications. The stand heights will reflect the growth and competition of individual trees in plantation. UAV laser scanning (ULS) and UAV stereo photogrammetry (USP) can both be used to estimate stand heights using different algorithms. Thus, this study aimed to deeply explore the variations of four kinds of stand heights including mean height, Lorey’s height, dominated height, and median height of coniferous plantations using different models based on ULS and USP data. In addition, the impacts of thinned point density of 30 pts to 10 pts, 5 pts, 1 pts, and 0.8 pts/m2 were also analyzed. Forest stand heights were estimated from ULS and USP data metrics by linear regression and the prediction accuracy was assessed by 10-fold cross validation. The results showed that the prediction accuracy of the stand heights using metrics from USP was basically as good as that of ULS. Lorey’s height had the highest prediction accuracy, followed by dominated height, mean height, and median height. The correlation between height percentiles metrics from ULS and USP increased with the increased height. Different stand heights had their corresponding best height percentiles as variables based on stand height characteristics. Furthermore, canopy height model (CHM)-based metrics performed slightly better than normalized point cloud (NPC)-based metrics. The USP was not able to extract exact terrain information in a continuous coniferous plantation for forest canopy cover (CC) over 0.49. The combination of USP and terrain from ULS can be used to estimate forest stand heights with high accuracy. In addition, the estimation accuracy of each forest stand height was slightly affected by point density, which can also be ignored

Oilseed Rape (Brassica napus L.) Phenology Estimation by Averaged Stokes-Related Parameters

Accurate and timely knowledge of crop phenology assists in planning and/or triggering appropriate farming activities. The multiple Polarimetric Synthetic Aperture Radar (PolSAR) technique shows great potential in crop phenology retrieval for its characterizations, such as short revisit time, all-weather monitoring and sensitivity to vegetation structure. This study aims to explore the potential of averaged Stokes-related parameters derived from multiple PolSAR data in oilseed rape phenology identification. In this study, the averaged Stokes-related parameters were first computed by two different wave polarimetric states. Then, the two groups of averaged Stokes-related parameters were generated and applied for analyzing averaged Stokes-related parameter sensitivity to oilseed rape phenology changes. At last, decision tree (DT) algorithms trained using 60% of the data were used for oilseed rape phenological stage classification. Four Stokes parameters (g0, g1, g2 and g3) and eight sub parameters (degree of polarization m, entropy H, ellipticity angle χ, orientation angle φ, degree of linear polarization Dolp, degree of circular polarization Docp, linear polarization ratio Lpr and circular polarization ratio Cpr) were extracted from a multi-temporal RADARSAT-2 dataset acquired during the whole oilseed rape growth cycle in 2013. Their sensitivities to oilseed rape phenology were analyzed versus five main rape phenology stages. In two groups (two different wave polarimetric states) of this study, g0, g1, g2, g3, m, H, Dolp and Lpr showed high sensitivity to oilseed rape growth stages while χ, φ, Docp and Cpr showed good performance for phenology classification in previous studies, which were quite noisy during the whole oilseed rape growth circle and showed unobvious sensitivity to the crop’s phenology change. The DT algorithms performed well in oilseed rape phenological stage identification. The results were verified at the parcel level with left 40% of the point dataset. Five phenology intervals of oilseed rape were identified with no more than three parameters by simple but robust decision tree algorithm groups. The identified phenology stages agree well with the ground measurements; the overall identification accuracies were 71.18% and 79.71%, respectively. For each growth stage, the best performance occurred at stage S1 with the accuracy of 95.65% for Group 1 and 94.23% for Group 2, and the worst performance occurred at stage S3 and S5 with the values around 60%. Most of the classification errors may resulted from the indistinguishability of S3 and S5 using Stokes-related parameters