Late Holocene erosion in NW Anatolia from sediments of Lake Manyas, Lake Ulubat and the southern shelf of the Marmara Sea, Turkey

This paper deals with modern and ancient sedimentation in fresh water lakes and the marine shelf of the southern Marmara region, NW Anatolia, Turkey. Most of the information has been obtained from monitoring of suspended load discharged into two lakes (Manyas and Ulubat) in the last 45 years and from 8-11 m thick lacustrine sediments, in addition to radiocarbon-dated shelf sediments. This allows a holistic approach to the drainage basin denudation over time. The results show that the sedimentation rates in the lakes were low 0. 22 cm.yr-1, from 4000-2000 yr BP and then they increased (0.29 cm.yr-1) up to sub-recent times and reached 0.44 cm.yr-1 in the last century. It is suggested that deforestation created high rates of sedimentation in the basins and/or strong denudation of the region during the Late Holocene. This study also shows that for shallow freshwater lakes the calculation of sedimentation rates must include fine particles lost by the outlets and coarse-grained bed load deposited on their shores. In addition, a high rate of sedimentation has been created by short, but repetitive intense depositions. During the last century particularly during the last 45 years the rate of sedimentation or denudation has increased dramatically in NW Turkey. The two World Wars and mismanagement of the land had important local effects by increasing deforestation and resulting in the present erosive conditions

Perdido Key Beach nourishment project: Gulf Islands National Seashore 1992 annual report

This report is the third annual report in a continuing series documenting a field project within the Gulf Islands National Seashore at Perdido Key, Florida. The field project includes the monitoring of a number of physical parameters related to the evolution of the Perdido Key beach nourishment project. Approximately 4.1 million m3 of dredge spoil from Pensacola Pass were placed upon approximately 7 km of the Gulf of Mexico beaches and 3 million m3 offshore of Perdido Key between November, 1989, and October, 1991. Beach profile data describing the evolution of the nourished beach are included, as well as wave, current, tide, wind, temperature, and rainfall data to describe the forces influencing the evolution. Data describing the sediment sizes throughout the project area are also included. A brief discussion of the data is included with an emphasis on evolution of the beach and offshore nourishment. (Document contains 249 pages.

Boron content of Lake Ulubat sediment: A key to interpret the morphological history of NW Anatolia, Turkey

Freshwater Lake Ulubat (c. 1.5 m deep and c. 138 km2) receives sediment from a 10.414 km2 area in the seismically active Susurluk Drainage Basin (SDB) of NW Turkey. The B and trace element contents of the lake infill seem to be a link between the fresh landforms of the SDB and the lacustrine sediment. Deposition in Lake Ulubat has been 1.60 cm.a-1 for the last 50 a according to radionucleides; however the sedimentation rate over the last millennium was 0.37 cm.a-1 based on 14C dating. The B content of the lacustrine infill displays a slight increase at 0.50 m and a drastic increase at 4 m depth occurring c. 31 a and c. 1070 a ago respectively. Probably the topmost change corresponds to the start of open mining in the SDB and the second one to the natural trenching of borate ore-deposits. These dates also show indirectly a 1.4 cm.a-1 erosion rate during the last millennium as the borate beds were trenched up to 15 m. By extrapolation, it is possible to establish that the formation of some of the present morphological features of the southern Marmara region, especially river incision, began in the late Pleistocene, and developed especially over the last 75 ka

The Role of Leucoyte-Derived Free Oxygen Radicals in the Pathogenesis of Experimental Acute Pancreatitis

The role of free oxygen radicals in experimental acute pancreatitis induced by common bile duct ligation was investigated by measuring malondialdehyde levels in the rat pancreas. Also, the potential role of leucocytes as the source of free oxygen radicals was tested by inducing leukopenia with methotrexate. The malondialdehyde levels in the control, pancreatitis and pancreatitis + methotrexate groups were 9.6 ± 2.0, 44.8 ± 11.4, and 25.6 ± 5.0 nmol malondialdehyde/ g pancreas tissue respectively. The corresponding histopathological severity scores were 0.5 ± 0.7, 8.1 ± 1.2 and 3.7 ± 1.1. The results suggest that the leucocyte may be an important source of free oxygen radicals in this experimental model

Relative power and efficiency as a main determinant of banks? profitability in Latin America

Despite the financial sector liberalization and openness that started in the earlier 90's and significant macroeconomic development as well as increasing inflow of capital toward the region, there is not any evidence of the reduction of interest rates as well as banks' profits in Latin America. In this paper we develop a model to estimate the determinants of Latin American banks' profitability and, try to understand the reasons why banks are reluctant to decrease their interest rate spreads even when change in competitiveness in the financial system is improving. By using Data Envelopment Analysis to better exploit the information of several variables at the same time and, by employing a sample of 200 Banks located in Argentina, Bolivia, Brazil, Costa Rica, Ecuador, El Salvador, Mexico, Nicaragua, Paraguay, Peru, Uruguay and Venezuela; we find that banks' profits grew consistently above the normal levels of profits adjusted by risk. Our results show that banks in Latin America have been profiting from their oligopolistic position in detriment of their clients in particular and of their whole economy in general

Adolescents\u27 Attitudes and Intentions to Use a Smartphone App to Promote Safe Driving

Purpose Designing effective driving safety interventions is imperative as traffic crashes are the leading cause of injury and death for adolescents. Using concepts from the Integrated Behavioral Model, we investigated adolescents\u27 attitudes and intentions towards engaging in safe driving practices and using smartphone-based driving safety technology. Methods Two-hundred and seven adolescents aged 14–18 (M = 16.1, SD = 0.8) completed a safe driving survey. A path model testing the associations between individual scores of attitudes, perceived norms, and perceived behavioral control with intentions controlling for demographic covariates was conducted. Results Greater intentions to drive safely was associated with greater perceived norms from family and peers (β = 0.75, p \u3c .001) and perceived capability (β = 0.19, p \u3c .001) to drive safely. Greater intentions to adopt a driving safety app was associated with greater perceived norms from family and peers (β = 0.29, p = .007). Females reported greater intentions to adopt a driving safety app than males (β = −0.15, p = .044). Conclusions Assessing attitudes and perceptions provides further understanding of what behavioral constructs are important for the development of adolescent driver safety interventions. Experimental research targeting and modifying behavior constructs is warranted

Programming van der Waals interactions with complex symmetries into microparticles using liquid crystallinity

Asymmetric interactions such as entropic (e.g., encoded by nonspherical shapes) or surface forces (e.g., encoded by patterned surface chemistry or DNA hybridization) provide access to functional states of colloidal matter, but versatile approaches for engineering asymmetric van der Waals interactions have the potential to expand further the palette of materials that can be assembled through such bottom-up processes. We show that polymerization of liquid crystal (LC) emulsions leads to compositionally homogeneous and spherical microparticles that encode van der Waals interactions with complex symmetries (e.g., quadrupolar and dipolar) that reflect the internal organization of the LC. Experiments performed using kinetically controlled probe colloid adsorption and complementary calculations support our conclusion that LC ordering can program van der Waals interactions by similar to 20 k(B)T across the surfaces of microparticles. Because diverse LC configurations can be engineered by confinement, these results provide fresh ideas for programming van der Waals interactions for assembly of soft matter

Phylogenetic analysis of some fungi species in West Kazakhstan based on nuclear ribosomal DNA ITS sequences

In this study, phylogenetic analysis of some fungal species distributed in West Kazakhstan was performed based on ITS sequences. All of the mushroom samples were collected from different regions of West Kazakhstan and brought to the laboratory. Total genomic DNA was extracted using a GeneMark commercial kit. ITS1 and ITS4 primers were used for the amplification of the ITS region in PCR analyses. The resulting DNA sequences were then edited using BioEdit and FinchTV. For phylogenetic analysis used MEGA 6.0 program. As a result of the study, ITS sequences ranged from 532 to 715 nucleotides, while the divergence values of the sequences differed between 0.000 and 0.468. The maximum likelihood tree constructed using ITS sequences consists of two clades. According to the phylogenetic analysis results obtained using other fungal species, ITS results were found to be a good indicator for the differentiation of fungal genera

Effect of material type, torque value, and sterilization on linear displacements of a scan body: An in vitro study.

BACKGROUND There is limited knowledge on the effect of scan body (SB) material type, torque value, and sterilization on linear displacements of implant SBs. PURPOSE To evaluate the effect of material type, torque value, and sterilization on linear displacements of SBs during screw tightening by using digital image correlation (DIC) analysis. MATERIALS AND METHODS One polyetheretherketone (PEEK, Zfx Intraoral Scan Body) and one titanium SB (Ti, MPS Zimmer Scanbody R1410) were tightened with 5 Ncm torque on two implants (Zimmer TSV ⌀4.7 mm) by using a digital torque limiting device. SBs' initial spatial positions relative to the implants were recorded by using 3D DIC technique. Measurements were repeated after initially increasing torque value to 10 Ncm and then to 15 Ncm, and these steps were repeated for a total of 10 PEEK and 10 Ti SBs on both implants (n = 20). All SBs were then sterilized 25 times by using an autoclave (STATIM 5000 S G4) according to manufacturer's recommendations and all measurements were repeated. Linear displacements on three axes were calculated for each SB with increasing torque values (from 5 to 10 Ncm and from 10 to 15 Ncm) before and after sterilization. SB displacements within each torque value-sterilization pair were compared by using Mann-Whitney U test, whereas Wilcoxon signed-rank test was used to compare SB displacements within each material-torque value pair between conditions and within each material-sterilization pair between torque values (α = 0.05). RESULTS On x-axis, PEEK SBs had higher displacements than Ti SBs (p < 0.001), whereas sterilization (p ≤ 0.028) and 15 Ncm torque application (p ≤ 0.006) led to higher displacements of PEEK SBs. On y-axis, PEEK SBs had higher displacements than Ti SBs with 15 Ncm torque application (p ≤ 0.033). A total of 15 Ncm torque-applied PEEK SBs and 10 Ncm torque-applied Ti SBs had higher displacements after sterilization (p ≤ 0.028). Application of 15 Ncm torque led to higher displacements regardless of the material (p ≤ 0.002). On z-axis, PEEK SBs had higher displacements (p ≤ 0.015), except for 10 Ncm torque-applied sterilized SBs (p = 0.102). With 10 Ncm torque application, sterilization decreased the displacement values of PEEK SBs (p = 0.044). Greater displacements were observed with 10 Ncm torque-applied Ti SBs before sterilization and 15 Ncm torque-applied PEEK SBs after sterilization (p ≤ 0.033). CONCLUSIONS Axial displacement of SBs was affected by material type, torque value, and sterilization. Ti SBs mostly had lower displacements than PEEK SBs. Application of 15 Ncm torque to tested PEEK SBs should be refrained from and a calibrated tightening tool may enable the application of 10 Ncm or lower torque values for lower displacements. Sterilization generally increased PEEK SB displacements