Brushing force of manual and sonic toothbrushes affects dental hard tissue abrasion

Objectives: This study aimed to determine the brushing forces applied during in vivo toothbrushing with manual and sonic toothbrushes and to analyse the effect of these brushing forces on abrasion of sound and eroded enamel and dentin in vitro. Materials and methods: Brushing forces of a manual and two sonic toothbrushes (low and high frequency mode) were measured in 27 adults before and after instruction of the respective brushing technique and statistically analysed by repeated measures analysis of variance (ANOVA). In the in vitro experiment, sound and eroded enamel and dentin specimens (each subgroup n = 12) were brushed in an automatic brushing machine with the respective brushing forces using a fluoridated toothpaste slurry. Abrasion was determined by profilometry and statistically analysed by one-way ANOVA. Results: Average brushing force of the manual toothbrush (1.6 ± 0.3 N) was significantly higher than for the sonic toothbrushes (0.9 ± 0.2 N), which were not significantly different from each other. Brushing force prior and after instruction of the brushing technique was not significantly different. The manual toothbrush caused highest abrasion of sound and eroded dentin, but lowest on sound enamel. No significant differences were detected on eroded enamel. Conclusion: Brushing forces of manual and sonic toothbrushes are different and affect their abrasive capacity. Clinical significance: Patients with severe tooth wear and exposed and/or eroded dentin surfaces should use sonic toothbrushes to reduce abrasion, while patients without tooth wear or with erosive lesions confining only to enamel do not benefit from sonic toothbrushes with regard to abrasio

Do magnification loupes affect the precision of cavity preparations made by undergraduates? A randomized crossover study.

BACKGROUND Evidence on the effect of magnification devices on procedure quality in restorative dentistry is scant. This study therefore aimed to assess, under simulated clinical conditions, if magnification loupes affect the quality of preparations carried out by undergraduate dental students. METHODS 59 undergraduate dental students underwent two visual acuity tests, based on which they were divided into a "low visual acuity group" (visus < 1) and a "good visual acuity group" (visus ≥ 1). In a randomized crossover experiment, participants performed a two-dimensional S and a three-dimensional O figure preparation with a dental handpiece on standardized acrylic blocs designed for preclinical restorative training. Each participant carried out the preparation tasks twice, once with magnification loupes (2.5×) and once without. Two blinded investigators independently evaluated parameters of preparation precision. Data were analyzed using Spearman rank correlation coefficients, intra-class correlation coefficients, and Wilcoxon rank-sum tests (α = 0.05). RESULTS Participants from the "low visual acuity group" did not show a statistically significant improvement in accuracy when they used magnification loupes for the S figure preparation (p ≥ 0.0625). Participants from the "high visual acuity group" obtained a higher level of accuracy (p ≤ 0.0012) when they used magnification loupes for the S figure preparation. The use of magnification loupes had no statistically significant effect on the accuracy parameters of the O figure cavity preparations (p ≥ 0.1865). Participants with high visual acuity achieved only a marginally better accuracy than participants with a visus < 1. CONCLUSIONS This study suggests that loupes with 2.5× magnification increase the accuracy of two-dimensional preparations while they have no significant effect, favorable or otherwise, on the accuracy of complex, three-dimensional cavity preparations of untrained dental students

Partial pulpotomy without age restriction: a retrospective assessment of permanent teeth with carious pulp exposure

OBJECTIVES This study aimed to retrospectively evaluate clinical and radiographic outcomes of partial pulpotomy performed in permanent teeth with carious pulp exposure. MATERIALS AND METHODS Records of patients undergoing treatment at an undergraduate dental clinic between 2010 and 2019 were screened for partial pulpotomies in teeth with a presumptive diagnosis of normal pulp or reversible pulpitis. The follow-up had to be ≥ 1 year. Patient data were retrieved and analyzed using Mantel-Cox chi square tests and Kaplan-Meier statistics. The level of significance was set at α = 0.05. RESULTS Partial pulpotomy was performed in 111 cases, of which 64 (58%) fulfilled the eligibility criteria. At the time of partial pulpotomy, the mean age was 37.3 (± 13.5) years (age range 18-85). The mean observation period was 3.1 (± 2.0) years. Two early failures (3.1%) and five late failures (7.7%) were recorded. The overall success rate of maintaining pulp vitality was 89.1%, with 98.4% tooth survival. The cumulative pulp survival rates of partial pulpotomy in patients aged  40 years were 100%, 75.5%, and 90.5%, respectively, with no significant difference between the age groups (p = 0.225). At follow-up, narrowing of the pulp canal space and tooth discoloration were observed in 10.9% and 3.1% of cases, respectively. CONCLUSIONS Across age groups, partial pulpotomy achieved favorable short and medium-term outcomes in teeth with carious pulp exposure. CLINICAL RELEVANCE Adequate case selection provided, partial pulpotomy is a viable operative approach to treat permanent teeth with deep carious lesions irrespective of patients' age

Quality of CAD-CAM inlays placed on aged resin-based composite restorations used as deep margin elevation: a laboratory study

OBJECTIVES To assess the impact of the age of resin-based composite (RBC) restorations used for deep margin elevation (DME) on the marginal quality and fracture resistance of inlays. MATERIALS AND METHODS Permanent human molars with direct RBC restorations, involving the mesial, occlusal, and distal surface (MOD), were allocated to four groups (each n = 12). Half of the teeth underwent thermomechanical loading including 240,000 occlusal load cycles and 534 thermal cycles (TML, 5 °C/55 °C; 49 N, 1.7 Hz). With RBC left in one proximal box as DME, all teeth received MOD inlays, made from lithium disilicate (LDS) or a polymer-infiltrated ceramic network material (PICN). The restored teeth underwent TML including 1.2 million occlusal cyclic loadings and 2673 thermal cycles. The marginal quality was assessed at baseline and after both runs of TML. Load-to-fracture tests were performed. The statistical analysis comprised multiple linear regressions (α = 0.05). RESULTS Simulated aging of RBC restorations had no significant effect on the marginal quality at the interface between the RBC and the tooth and the RBC and the inlay (p ≥ 0.247). Across time points, higher percentages of non-continuous margin were observed between the inlay and the tooth than between the tooth and the RBC (p ≤ 0.039). The age of the DME did not significantly affect the fracture resistance (p ≥ 0.052). CONCLUSIONS Artificial aging of RBC restorations used for DME had no detrimental effect on the marginal quality and fracture resistance of LDS and PICN inlays. CLINICAL RELEVANCE This laboratory study suggests that-in select cases-intact, direct RBC restorations not placed immediately before the delivery of an indirect restoration may be used for DME

Sonic irrigant activation for root canal disinfection: power modes matter!

BACKGROUND Sonic irrigant activation has gained widespread popularity among general dentists and endodontists alike in recent years. This in vitro study aimed to evaluate the impact of three power modes of a sonic activation device (EDDY) on its antimicrobial effectiveness in infected root canals. METHODS The root canals of straight, human roots (n = 120) were prepared to size 40/.06. In a short-term infection experiment, the root canals were inoculated with different microbial species for three days. The following irrigation protocols, using 4 ml of normal saline as irrigant, were performed: negative control, manual rinsing, sonic irrigant activation at power modes "low", "medium" and "high". In a second, long-term experiment, testing the same irrigation protocols, inoculation lasted 21 days and sodium hypochlorite was used as irrigant. Sequential infection control samples were assessed using culture assays. The statistical analysis included one-way analysis of variance of log10-scaled counts of colony-forming units (CFU) with post-hoc comparisons using Bonferroni corrections and Chi2 tests (α = 0.05). RESULTS In the short-term experiment, the sonic irrigation protocols decreased the number of CFUs by 1.88 log10 units compared with the negative control (p < 0.001). The power modes "medium" and "high" achieved the most effective reduction of the microbial load. In the long-term experiment, microbial regrowth occurred after 7 days unless the device was used at its highest power setting. CONCLUSIONS The power modes of the sonic irrigation device have a significant impact on the effectiveness for endodontic disinfection. The sonic irrigation device should always be used at the highest power setting in order to maximize its antimicrobial effectiveness

Dental injuries in Swiss soccer supporters: A comparative study of regular fans, ultras, and hooligans for public health strategies

Abstract Objectives Violence among soccer supporters continues to pose a significant public health concern in many parts of the world. In Switzerland, hooliganism is largely uninvestigated. This study aimed to examine incidents of violence and associated dental injuries among different groups of soccer supporters, as well as assess the impact of intoxicants on their behavior, using survey data from regular fans, ultras, and hooligans in the Swiss Football League. Material and Methods A cross‐sectional survey using a standardized questionnaire was conducted among distinct factions of soccer supporters in the Swiss Football League in 2022. A total of 165 participants self‐identified as belonging to one of three subgroups: “regular fan,” “ultra,” or “hooligan.” Data were gathered on physical altercations, dental injuries, possession of mouthguards, intoxicant use, and medical assistance. Descriptive statistics, logistic regression models, and significance tests were used for data analysis (α = .05). Results Hooligans had a higher frequency of dental injuries resulting from fights than ultras and regular fans. Hooligans with 11–20 fights per soccer season had a 9.6 times higher probability of dental trauma than those with 0–5 fights (p = .048). Possession of a mouthguard was associated with a lower risk of dental injuries for hooligans but an increased risk for ultras. Additionally, hooligans were found to differ significantly from other groups in their consumption of amphetamines and cocaine (p < .001). Conclusions The study found a strong link between physical altercations and dental injuries among soccer supporters. To promote better prevention, there is a necessity for enhanced educational initiatives facilitated by dentists to amplify the dissemination of mouthguards. Furthermore, it is crucial to raise awareness regarding their proper fitting to minimize the occurrence of combat‐related dental injuries. Health authorities and other stakeholders should take a comprehensive approach to addressing some of the root causes of violent behavior, which include alcohol abuse and illicit substance consumption

Impact of Irradiation on the Adhesive Performance of Resin-Based Dental Biomaterials: A Systematic Review of Laboratory Studies

Head and neck cancers are a significant global health burden, with radiation therapy being a frequently utilized treatment. The aim of this systematic review was to provide a critical appraisal of laboratory studies that assessed the effect of irradiation on the adhesive performance of resin-based biomaterials. The analysis included 23 laboratory studies obtained from five databases, with most studies using human enamel, dentin, or both, and bonding procedures involving the fabrication of direct restorations, standardized specimens, bonding of orthodontic brackets, and luting of endodontic fiber posts. The protocols used for irradiation varied, with most studies exposing specimens made from extracted teeth to irradiation using cabinet irradiators to simulate treatment of head and neck cancer. The findings indicate that irradiation reduces the bond strength of dental adhesives and resin-based composites on flat, ground enamel and dentin specimens, with different adhesives and timing of irradiation having a significant impact on adhesive performance. Irradiation also increased microleakage in most studies. The effect of irradiation on marginal adaptation of direct resin-based composite restorations was inconclusive. This systematic review indicates that irradiation has detrimental effects on the adhesive performance of resin-based biomaterials and highlights the need for further clinical and laboratory studies evaluating the performance of adhesive materials and approaches to improve it

Apical Pressure Generated Using Conventional Syringe Irrigation in Immature Teeth—An In Vitro Study

This in vitro study aimed to evaluate apical pressure during irrigant delivery with syringe irrigation in immature teeth with an open apical foramen. Conventional syringe irrigation was performed in a 3D-printed immature incisor. A 5 mL syringe combined with 25 G and 30 G cannulas was used. Open-ended and side-vented needle tip designs were assessed. Cannulas were placed at tooth length (TL), TL −1 mm, TL −2 mm, and TL −4 mm. The syringe plunger was moved with a force of 10 N, 20 N, 40 N, and 80 N to simulate clinical conditions. A pressure sensor measured periapical pressures during irrigation. Each experiment was repeated 10 times. Data were analyzed descriptively (maximum, mean, standard deviation, 95% CI) with the critical threshold indicative of extrusion set at 7.64 mbar. 30 G cannulas with both needle tip designs never exceeded the threshold at any TL with a plunger force of 10–40 N. At 80 N, 30 G open-ended cannulas exceeded the threshold in 10%, 30 G side-vented in 20–60% of the measurements. At any TL, 25 G open-ended cannulas and 25 G side-vented cannulas never crossed the threshold with forces of 10–20 N and 10 N, respectively. Consequently, 30 G cannulas with both designs can be recommended for irrigant delivery in immature teeth. 25 G cannulas ought to be used with caution

STAndard Reporting of CAries Detection and Diagnostic Studies (STARCARDDS).

AIM The aim of this paper is to present recommendations from an international workshop which evaluated the methodology and reporting of caries diagnostic studies. As a unique feature, this type of studies is focused on caries lesion detection and assessment, and many of them are carried out in vitro, because of the possibility of histological validation of the whole caries spectrum. This feature is not well covered in the existing reporting STARD guideline within the EQUATOR Network. PARTICIPANTS AND METHODS An international working group of 13 cariology researchers was formed. The STARD checklist was reviewed and modified for caries detection and diagnosis purposes, in a three-step process of evaluation, consensual modification, and delivery during three 2-day workshops over 18 months. Special attention was paid to reporting requirements of caries studies that solely focus on reliability. RESULTS The STARD checklist was modified in 14/30 items, with an emphasis on issues of sample selection (tooth selection in in vitro studies), blinding, and detailed reporting of results. CONCLUSION Following STARCARDDS (STAndard Reporting of CAries Detection and Diagnostic Studies) is expected to result in complete reporting of study design and methodology in future caries diagnosis and detection experiments both in vivo and in vitro, thus allowing for better comparability of studies and higher quality of systematic reviews. CLINICAL RELEVANCE Standardization of caries diagnostic studies leads to a better comparability among future studies, both in vivo and in vitro