ETUDE DE L’ISOTHERME 25 °C DU SYSTEME QUASI QUATERNAIRE H2O - Zn(NO3)2,6H2O – Cu(NO3)2,3H2O - NH4NO3 II- ISOPLETHES : 41 MASSE % Cu(NO3)2, [MASSE DE NH4NO3] = -10/9 [MASSE DE Zn(NO3)2] + 100, [MASSE DE H2O] = 0.5702 [MASSE DE ZN(NO3)2] + 0.2879[ MASSE DE

The solid-liquid equilibria of the quasi quaternary system H2O Zn(NO3)2,6H2O Cu(NO3)2,3H2O-NH4NO3 were studied at 25°C by using a synthetic method based on conductivity measurements. Three isoplethic sections has been established at 25°C and the stable solid phases which appear are: NH4NO3 (IV), Zn(NO3)2,6H2O, Cu(NO3)2,3H2O and metastable Cu(NO3),2.5H2O. Neither double salts, nor mixed crystals are observed at these temperature and composition range

MODELING OF THE INFLUENCE OF THERMIC TREATMENT UPON THE MECHANICAL PROPERTIES OF ALUMINUM-TIN ALLOYS

In order to master and improve the quality and properties of the final products, the major industrial challenge lies in the possibility of controlling the morphology, size of microstructures that reside within the molded pieces, as well as their defects; this is the fundamental reason according to which we are more and more interested in mastering the growth and germination of such alloys, as well as the developing structures, at the time of solidification process. The modeling reveals as a valuable aid in the mastery of the formation of such heterogeneousness: segregation cells that are incompatible with industrial requirements. The whole work focuses upon the modeling of the segregation phenomenon of the four hypoeutectic alloys, Al1%Sn, Al2%Sn, Al3%Sn and Al4%Sn, as well as the tin effect upon certain mechanical properties of aluminum. Usually, the microstructure and mechanical behavior of such alloys as Al-Sn are directly influenced by some parameters such as composition, cooling velocity and homogenization process

INFLUENCE DU TRAITEMENT THERMIQUE ET MECANIQUE SUR LES PROPRIETES MECANIQUES ET STRUCTURALES DES ACIERS AU MANGANESE MOULES.

Molded Steel with manganese have approximately 1,2% C and 12% Mn, this high proportion of manganese gives to this alloy a stable austenitic structure on a room temperature. The experimental methods used for metallurgical studies are spark optical emission spectroscopy, optical microscopy, scanning electron microscopy, micro-hardness and hardnesss test. Steel 1 is heat-treated constitued by 15,516 % of manganese, 2,677 % of chromuim and 1,286 % of carbon. Steel 2 is mechanically treated contains 13,454 % of manganese, 1,721 % of chromuim and 1,213 % of carbon . Steel 1 has sustained quench at 1070°C, for two differents maintaining times on oven 30 and 50 minutes for a thickness of 150 millimeters then for two differents thickness 100 and 150 millimeters for a time of 50 minutes. When maintaining time on the oven increase for low dimension, surface’s alloy become more ductile. We have applied a mechanical treatement manually on steel 2 surface, his hardness increase significantly

MODELISATION DE L'INFLUENCE DU TRAITEMENT THERMIQUE SUR LES PROPRIETES MECANIQUES DES ALLIAGES ALUMINIUM-CUIVRE (Al-Cu)

In order to master and improve the quality and properties of the final products, the major industrial challenge lies in the possibility of controlling the morphology, size of microstructures that reside within the molded pieces, as well as their defects; this is the fundamental reason according to which we are more and more interested in mastering the growth and germination of such alloys, as well as the developing structures, at the time of solidification process. The modeling reveals as a valuable aid in the mastery of the formation of such heterogeneousness: segregation cells that are incompatible with industrial requirements. The whole work focuses upon the modeling of the segregation phenomenon of the four hypoeutectic alloys, Al1%Cu, Al2%Cu, Al3%Cu et Al4%Cu, as well as the copper effect upon certain mechanical properties of aluminum. Usually, the microstructure and mechanical behavior of such alloys as Al-Cu are directly influenced by some parameters such as composition, cooling velocity and homogenization process