Investigation of new radar-data-reduction techniques used to determine drag characteristics of a free-flight vehicle

An investigation was conducted of new techniques used to determine the complete transonic drag characteristics of a series of free-flight drop-test models using principally radar tracking data. The full capabilities of the radar tracking and meteorological measurement systems were utilized. In addition, preflight trajectory design, exact kinematic equations, and visual-analytical filtering procedures were employed. The results of this study were compared with the results obtained from analysis of the onboard, accelerometer and pressure sensor data of the only drop-test model that was instrumented. The accelerometer-pressure drag curve was approximated by the radar-data drag curve. However, a small amplitude oscillation on the latter curve precluded a precise definition of its drag rise

A summary of the test procedures and operational details of an ocean dumping pollution monitoring experiment conducted 7 October 1976

A remote sensor experiment was conducted at a sewage sludge dump site off the Delaware/Maryland coast. Two aircraft serving as remote sensor platforms flew over the dump site during a sludge dump. One aircraft carried a multispectral scanner and the other aircraft carried a rapid scanning spectrometer. Data from sea-truth stations were collected concurrent with overpasses of the aircraft. All sensors were operational and produced good digital data

Keck Echellette Spectrograph and Imager Observations of Metal-poor Damped Lyα Systems

We present the first results from a survey of SDSS quasars selected for strong H I damped Lyα (DLA) absorption with corresponding low equivalent width absorption from strong low-ion transitions (e.g., C II λ1334 and Si II λ1260). These metal-poor DLA candidates were selected from the SDSS fifth release quasar spectroscopic database, and comprise a large new sample for probing low-metallicity galaxies. Medium-resolution echellette spectra from the Keck Echellette Spectrograph and Imager spectrograph for an initial sample of 35 systems were obtained to explore the metal-poor tail of the DLA distribution and to investigate the nucleosynthetic patterns at these metallicities. We have estimated saturation corrections for the moderately underresolved spectra, and systems with very narrow Doppler parameters (b ≤ 5 km s^(–1)) will likely have underestimated abundances. For those systems with Doppler parameters b > 5 km s^(–1), we have measured low-metallicity DLA gas with [X/H] < –2.4 for at least one of C, O, Si, or Fe. Assuming non-saturated components, we estimate that several DLA systems have [X/H] < –2.8, including five DLA systems with both low equivalent widths and low metallicity in transitions of both C II and O I. All of the measured DLA metallicities, however, exceed or are consistent with a metallicity of at least 1/1000 of solar, regardless of the effects of saturation in our spectra. Our results indicate that the metal-poor tail of galaxies at z ~ 3 drops exponentially at [X/H] ≾ –3. If the distribution of metallicity is Gaussian, the probability of identifying interstellar medium gas with lower abundance is extremely small, and our results suggest that DLA systems with [X/H] < –4.0 are extremely rare, and could comprise only 8 × 10^(–7) of DLA systems. The relative abundances of species within these low-metallicity DLA systems are compared with stellar nucleosynthesis models, and are consistent with stars having masses of 30 M_⊙ < M * < 100 M_⊙. The observed ratio of [C/O] for values of [O/H] < –2.5 exceeds values seen in moderate metallicity DLA systems, and also exceeds theoretical nucleosynthesis predictions for higher mass Population III stars. We also have observed a correlation between the column density N(C IV) with [Si/H] metallicity, suggestive of a trend between mass of the DLA system and its metallicity

Pump linewidth requirement for optical parametric oscillators

Pumping laser bandwidth requirement for optical parametric oscillator

Electromagnetic Scattering from Relativistic Bound States

The quasipotential formalism for elastic scattering from relativistic bound states is formulated based on the instant constraint in the Breit frame. The quasipotential electromagnetic current is derived from Mandelstam's five-point kernel and obeys a two-body Ward identity. Breit-frame wave functions are obtained directly by solving integral equations with nonzero total three-momentum, thus accomplishing a dynamical boost. Calculations of electron-deuteron elastic form factors illustrate the importance of the dynamical boost versus kinematic boosts of the rest frame wave functions.Comment: RevTeX 3.0 manuscript, 9 pages. UU-file is a single PostScript file of the manuscript including figures. U. MD PP #93-17

Millimeter wave satellite concepts, volume 1

The identification of technologies necessary for development of millimeter spectrum communication satellites was examined from a system point of view. Development of methodology based on the technical requirements of potential services that might be assigned to millimeter wave bands for identifying the viable and appropriate technologies for future NASA millimeter research and development programs, and testing of this methodology with selected user applications and services were the goals of the program. The entire communications network, both ground and space subsystems was studied. Cost, weight, and performance models for the subsystems, conceptual design for point-to-point and broadcast communications satellites, and analytic relationships between subsystem parameters and an overall link performance are discussed along with baseline conceptual systems, sensitivity studies, model adjustment analyses, identification of critical technologies and their risks, and brief research and development program scenarios for the technologies judged to be moderate or extensive risks. Identification of technologies for millimeter satellite communication systems, and assessment of the relative risks of these technologies, was accomplished through subsystem modeling and link optimization for both point-to-point and broadcast applications

Amorphous Systems in Athermal, Quasistatic Shear

We present results on a series of 2D atomistic computer simulations of amorphous systems subjected to simple shear in the athermal, quasistatic limit. The athermal quasistatic trajectories are shown to separate into smooth, reversible elastic branches which are intermittently broken by discrete catastrophic plastic events. The onset of a typical plastic event is studied with precision, and it is shown that the mode of the system which is responsible for the loss of stability has structure in real space which is consistent with a quadrupolar source acting on an elastic matrix. The plastic events themselves are shown to be composed of localized shear transformations which organize into lines of slip which span the length of the simulation cell, and a mechanism for the organization is discussed. Although within a single event there are strong spatial correlations in the deformation, we find little correlation from one event to the next, and these transient lines of slip are not to be confounded with the persistent regions of localized shear -- so-called "shear bands" -- found in related studies. The slip lines gives rise to particular scalings with system length of various measures of event size. Strikingly, data obtained using three differing interaction potentials can be brought into quantitative agreement after a simple rescaling, emphasizing the insensitivity of the emergent plastic behavior in these disordered systems to the precise details of the underlying interactions. The results should be relevant to understanding plastic deformation in systems such as metallic glasses well below their glass temperature, soft glassy systems (such as dense emulsions), or compressed granular materials.Comment: 21 pages, 18 figure

Fermi point in graphene as a monopole in momentum space

We consider the effective field theory of graphene monolayer with the Coulomb interaction between fermions taken into account. The gauge field in momentum space is introduced. The position of the Fermi point coincides with the position of the corresponding monopole. The procedure of extracting such monopoles during lattice simulations is suggested.Comment: Latex, 12 page