250 research outputs found
Reverse polarized inductive coupling to transmit and receive radiofrequency coil arrays
Cataloged from PDF version of article.In this study, the reverse polarization method is implemented using transmit and receive arrays to improve the visibility of the interventional devices. Linearly polarized signal sourcesinductively and receptively coupled radiofrequency coilsare used in the experimental setups to demonstrate the ability of the method to separate these sources from a forward polarized anatomy signal. Two different applications of the reverse polarization method are presented here: (a) catheter tracking and (b) fiducial marker visualization, in both of which transmit and receive arrays are used. The performance of the reverse polarization method was further tested with phantom and volunteer studies, and the results proved the feasibility of this method with transmit and receive arrays. Magn Reson Med, 2012. (C) 2011 Wiley Periodicals, In
MRI-guided gene therapy
Cataloged from PDF version of article.MRI has the ability to generate high-contrast and
high-resolution images, to obtain multiple diagnostic evaluations
of organ function and morphology, and to provide multiple image
planes with no risk of ionizing radiation. Recent efforts have focused
on using MR technology to monitor gene delivery, to enhance
gene transfection/transduction, and to track gene
expression. This review summarizes the current status of MRIguided
gene therapy.
(C) 2006 Published by Elsevier B.V. on behalf of the Federation of
European Biochemical Societie
MR-Guided Interventions for Prostate Cancer
Cataloged from PDF version of article.MR imaging is currently the most effective diagnostic imaging tool for visualizing the anatomy and pathology of the prostate gland. Currently, the practicality and cost effectiveness of transrectal ultrasound dominates image guidance for needle-based prostate interventions. Challenges to the integration of diagnostic and interventional MR imaging have included the lack of real-time feedback, the complexity of the imaging technique, and limited access to the perineum within the geometric constraints of the MR imaging scanner. Two basic strategies have been explored and clinically demonstrated in the literature: (1) coregistration of previously acquired diagnostic MR imaging to interventional TRUS or open scanner MR images, and (2) stereotactic needle interventions within conventional diagnostic scanners using careful patient positioning or the aid of simple manipulators. Currently, researchers are developing techniques that render MR imaging the method of choice for the direct guidance of many procedures. This article focuses on needle-based interventions for prostate cancer, including biopsy, brachytherapy, and thermal therapy. With rapid progress in biologic imaging of the prostate gland, the authors believe that MR imaging guidance will play an increasing role in the diagnosis and treatment of prostate cancer. © 2005 Elsevier Inc. All rights reserved
Modeling of radio-frequency induced currents on lead wires during MR imaging using a modified transmission line method
Cataloged from PDF version of article.Purpose: Metallic implants may cause serious tissue heating during magnetic resonance (MR) imaging. This heating occurs due to the induced currents caused by the radio-frequency (RF) field. Much work has been done to date to understand the relationship between the RF field and the induced currents. Most of these studies, however, were based purely on experimental or numerical methods. This study has three main purposes: (1) to define the RF heating properties of an implant lead using two parameters; (2) to develop an analytical formulation that directly explains the relationship between RF fields and induced currents; and (3) to form a basis for analysis of complex cases. Methods: In this study, a lumped element model of the transmission line was modified to model leads of implants inside the body. Using this model, leads are defined using two parameters: impedance per unit length, Z, and effective wavenumber along the lead, k t. These two parameters were obtained by using methods that are similar to the transmission line theory. As long as these parameters are known for a lead, currents induced in the lead can be obtained no matter how complex the lead geometry is. The currents induced in bare wire, lossy wire, and insulated wire were calculated using this new method which is called the modified transmission line method or MoTLiM. First, the calculated induced currents under uniform electric field distribution were solved and compared with method-of-moments (MoM) calculations. In addition, MoTLiM results were compared with those of phantom experiments. For experimental verification, the flip angle distortion due to the induced currents was used. The flip angle distribution around a wire was both measured by using flip angle imaging methods and calculated using current distribution obtained from the MoTLiM. Finally, these results were compared and an error analysis was carried out. Results: Bare perfect electric, bare lossy, and insulated perfect electric conductor wires under uniform and linearly varying electric field exposure were solved, both for 1.5 T and 3 T scanners, using both the MoTLiM and MoM. The results are in agreement within 10 mean-square error. The flip angle distribution that was obtained from experiments was compared along the azimuthal paths with different distances from the wire. The highest mean-square error was 20 among compared cases. Conclusions: A novel method was developed to define the RF heating properties of implant leads with two parameters and analyze the induced currents on implant leads that are exposed to electromagnetic fields in a lossy medium during a magnetic resonance imaging (MRI) scan. Some simple cases are examined to explain the MoTLiM and a basis is formed for the analysis of complex cases. The method presented shows the direct relationship between the incident RF field and the induced currents. In addition, the MoTLiM reveals the RF heating properties of the implant leads in terms of the physical features of the lead and electrical properties of the medium. © 2011 American Association of Physicists in Medicine
Binary Sequences With Low Aperiodic Autocorrelation for Synchronization Purposes
Cataloged from PDF version of article.An evolutionary algorithm is used to find three sets
of binary sequences of length 49–100 suitable for the synchronization
of digital communication systems. Optimization of the sets are
done by taking into consideration the type of preamble used in
data frames and the phase-lock mechanism of the communication
system. The preamble is assumed to be either a pseudonoise (PN)
sequence or a sequence of 1’s. There may or may not be phase ambiguity
in detection. With this categorization, the first set of binary
sequences is optimized with respect to aperiodic autocorrelation
which corresponds to the random (PN) preamble without phase
ambiguity case. The second and third sets are optimized with respect
to a modified aperiodic autocorrelation for different figures
of merit corresponding to the predetermined preamble (sequence
of 1’s) with and without phase ambiguity cases
Analytic Expressions for the Ultimate Intrinsic Signal-to-Noise Ratio and Ultimate Intrinsic Specific Absorption Rate in MRI
Cataloged from PDF version of article.The ultimate intrinsic signal-to-noise ratio is the highest possible
signal-to-noise ratio, and the ultimate intrinsic specific
absorption rate provides the lowest limit of the specific absorption
rate for a given flip angle distribution. Analytic expressions
for ultimate intrinsic signal-to-noise ratio and ultimate intrinsic
specific absorption rate are obtained for arbitrary sample
geometries. These expressions are valid when the distance
between the point of interest and the sample surface is smaller
than the wavelength, and the sample is homogeneous. The
dependence on the sample permittivity, conductivity, temperature,
size, and the static magnetic field strength is given in
analytic form, which enables the easy evaluation of the change in
signal-to-noise ratio and specific absorption rate when the sample
is scaled in size or when any of its geometrical or electrical
parameters is altered. Furthermore, it is shown that signal-tonoise
ratio and specific absorption rate are independent of the
permeability of the sample. As a practical case and a solution
example, a uniform, circular cylindrically shaped sample is studied.
Magn Reson Med 66:846–858, 2011. © 2011 Wiley-Liss,
In
Comments on "Ensuring Safety of Implanted Devices Under MRI Using Reversed Polarization"
Cataloged from PDF version of article
Specific Absorption Rate Reduction Using Nonlinear Gradient Fields
Cataloged from PDF version of article.The specific absorption rate is used as one of the main safety
parameters in magnetic resonance imaging. The performance
of imaging sequences is frequently hampered by the limitations
imposed on the specific absorption rate that increase in severity
at higher field strengths. The most well-known approach to
reducing the specific absorption rate is presumably the variable
rate selective excitation technique, which modifies the gradient
waveforms in time. In this article, an alternative approach is introduced
that uses gradient fields with nonlinear variations in space
to reduce the specific absorption rate. The effect of such gradient
fields on the relationship between the desired excitation
profile and the corresponding radiofrequency pulse is shown. The
feasibility of the method is demonstrated using three examples
of radiofrequency pulse design. Finally, the proposed method
is compared with and combined with the variable rate selective
excitation technique. Magn Reson Med 70:537–546, 2013.
© 2012 Wiley Periodicals, In
Reduction of the Radiofrequency Heating of Metallic Devices Using a Dual-Drive Birdcage Coil
Cataloged from PDF version of article.In this work, it is demonstrated that a dual-drive birdcage coil
can be used to reduce the radiofrequency heating of metallic
devices during magnetic resonance imaging. By controlling the
excitation currents of the two channels of a birdcage coil, the radiofrequency
current that is induced near the lead tip could be
set to zero. To monitor the current, the image artifacts near the
lead tips were measured. The electric field distribution was controlled
using a dual-drive birdcage coil. With this method, the
lead currents and the lead tip temperatures were reduced substantially
[<0.3 C for an applied 4.4 W/kg SAR compared to
>4.9 C using quadrature excitation], as demonstrated by phantom
and animal experiments. The homogeneity of the flip angle
distribution was preserved, as shown by volunteer experiments.
The normalized root-mean-square error of the flip angle distribution
was less than 10% for all excitations. The average specific
absorption rate increased as a trade-off for using different excitation
patterns. Magn Reson Med 69:845–852, 2013. VC 2012
Wiley Periodicals, In
Parametric nonlinear lumped element model for circular CMUTs in collapsed mode
Cataloged from PDF version of article.We present a parametric equivalent circuit model
for a circular CMUT in collapsed mode. First, we calculate
the collapsed membrane deflection, utilizing the exact electrical
force distribution in the analytical formulation of membrane
deflection. Then we develop a lumped element model of
collapsed membrane operation. The radiation impedance for
collapsed mode is also included in the model. The model is
merged with the uncollapsed mode model to obtain a simulation
tool that handles all CMUT behavior, in transmit or receive.
Large- and small-signal operation of a single CMUT can
be fully simulated for any excitation regime. The results are in
good agreement with FEM simulations
- …