Analysis of the absorption and emission spectra of U4+ in α-ThBr 4

The low temperature form α-ThBr4 has a scheelite structure I41/a in which the tetravalent uranium occupies the thorium site which is S4. Assuming that the ground state remains Γ 4 as in the β-ThBr4 form, the polarized absorption spectrum at 4.2 K shows that D2d is a good approximation. A peculiarity of this host is the exaltation of very numerous fluorescences of U4+ which permit to assign four Stark levels of the ground state 3H4 : Γ5 at 110 cm-1, Γ 1 at 473 cm-1, Γ1 at 623 cm-1 and Γ5 at 830 cm-1. 30 levels have been assigned and the crystal field parameters of U4+ (5f2) have been calculated in the D2d approximation : B20 = - 382, B40 = - 3 262, B44 = - 1734, B60 = - 851 and B64 = - 1828 cm-1. It is interesting to note that a small distortion in the scheelite structure of the α-ThBr4 compared with the zircon structure β-ThBr4 induces important changes in the crystal field parameters

Electromagnetic vacuum energy for two parallel slabs in terms of surface, wave guide and photonic modes

The formulation of the Lifshitz formula in terms of real frequencies is reconsidered for half spaces described by the plasma model. It is shown that besides the surface modes (for the TM polarization), and the photonic modes, also waveguide modes must be considered.Comment: some references adde

Surface plasmon modes and the Casimir energy

We show the influence of surface plasmons on the Casimir effect between two plane parallel metallic mirrors at arbitrary distances. Using the plasma model to describe the optical response of the metal, we express the Casimir energy as a sum of contributions associated with evanescent surface plasmon modes and propagative cavity modes. In contrast to naive expectations, the plasmonic modes contribution is essential at all distances in order to ensure the correct result for the Casimir energy. One of the two plasmonic modes gives rise to a repulsive contribution, balancing out the attractive contributions from propagating cavity modes, while both contributions taken separately are much larger than the actual value of the Casimir energy. This also suggests possibilities to tailor the sign of the Casimir force via surface plasmons.Comment: 4 pages, 3 figures, revtex

Influence of water adsorbed on gold on van der Waals/Casimir forces

In this paper we investigate the influence of ultra thin water layer (1-1.5 nm) on the van der Waals/Casimir force between gold surfaces. Adsorbed water is inevitably present on gold surfaces at ambient conditions as jump-up-to contact during adhesion experiments demonstrate. Calculations based on the Lifshitz theory give very good agreement with the experiment in absence of any water layer for surface separations d>10 nm. However, a layer of thickness h<1.5 nm is allowed by the error margin in force measurements. At shorter separations, d<10 nm, the water layer can have a strong influence as calculations show for flat surfaces. Nonetheless, in reality the influence of surface roughness must also be considered, and it can overshadow any water layer influence at separations comparable to the total sphere-plate rms roughness w_{shp}+w.Comment: 8 pages, 5 figure, to be published in Phys. Rev.

The role of Surface Plasmon modes in the Casimir Effect

In this paper we study the role of surface plasmon modes in the Casimir effect. First we write the Casimir energy as a sum over the modes of a real cavity. We may identify two sorts of modes, two evanescent surface plasmon modes and propagative modes. As one of the surface plasmon modes becomes propagative for some choice of parameters we adopt an adiabatic mode definition where we follow this mode into the propagative sector and count it together with the surface plasmon contribution, calling this contribution "plasmonic". The remaining modes are propagative cavity modes, which we call "photonic". The Casimir energy contains two main contributions, one coming from the plasmonic, the other from the photonic modes. Surprisingly we find that the plasmonic contribution to the Casimir energy becomes repulsive for intermediate and large mirror separations. Alternatively, we discuss the common surface plasmon defintion, which includes only evanescent waves, where this effect is not found. We show that, in contrast to an intuitive expectation, for both definitions the Casimir energy is the sum of two very large contributions which nearly cancel each other. The contribution of surface plasmons to the Casimir energy plays a fundamental role not only at short but also at large distances.Comment: 10 pages, 3 figures. TQMFA200

Conductivity in organic semiconductors hybridized with the vacuum field

Organic semiconductors have generated considerable interest for their potential for creating inexpensive and flexible devices easily processed on a large scale [1-11]. However technological applications are currently limited by the low mobility of the charge carriers associated with the disorder in these materials [5-8]. Much effort over the past decades has therefore been focused on optimizing the organisation of the material or the devices to improve carrier mobility. Here we take a radically different path to solving this problem, namely by injecting carriers into states that are hybridized to the vacuum electromagnetic field. These are coherent states that can extend over as many as 10^5 molecules and should thereby favour conductivity in such materials. To test this idea, organic semiconductors were strongly coupled to the vacuum electromagnetic field on plasmonic structures to form polaritonic states with large Rabi splittings ca. 0.7 eV. Conductivity experiments show that indeed the current does increase by an order of magnitude at resonance in the coupled state, reflecting mostly a change in field-effect mobility as revealed when the structure is gated in a transistor configuration. A theoretical quantum model is presented that confirms the delocalization of the wave-functions of the hybridized states and the consequences on the conductivity. While this is a proof-of-principle study, in practice conductivity mediated by light-matter hybridized states is easy to implement and we therefore expect that it will be used to improve organic devices. More broadly our findings illustrate the potential of engineering the vacuum electromagnetic environment to modify and to improve properties of materials.Comment: 16 pages, 13 figure

Weak Measurements of Light Chirality with a Plasmonic Slit

We examine, both experimentally and theoretically, an interaction of tightly focused polarized light with a slit on a metal surface supporting plasmon-polariton modes. Remarkably, this simple system can be highly sensitive to the polarization of the incident light and offers a perfect quantum-weak-measurement tool with a built-in post-selection in the plasmon-polariton mode. We observe the plasmonic spin Hall effect in both coordinate and momentum spaces which is interpreted as weak measurements of the helicity of light with real and imaginary weak values determined by the input polarization. Our experiment combines advantages of (i) quantum weak measurements, (ii) near-field plasmonic systems, and (iii) high-numerical aperture microscopy in employing spin-orbit interaction of light and probing light chirality.Comment: 5 pages, 3 figure

Bone age estimation with the Greulich-Pyle atlas using 3T MR images of hand and wrist.

The age estimation of the hand bones by means of X-ray examination is a pillar of the forensic age estimation. Since the associated radiation exposure is controversial, the search for ionizing radiation-free alternatives such as MRI is part of forensic research. The aim of the current study was to use the Greulich-Pyle (GP) atlas on MR images of the hand and wrist to provide reference values for assessing the age of the hand bones. 3T hand MR images of 238 male participants between the ages of 13 and 21 were acquired using 3D gradient echo sequences (VIBE, DESS). Two readers rated the images using the X-ray-based GP atlas method. A descriptive analysis and a transitional analysis were used for the statistical processing of the data. The agreement between and within the raters was assessed. In addition, a comparison was made with the chronological age and with X-ray studies. The descriptive analysis and the transition analysis showed similar results. Both evaluations showed good agreement with X-ray studies. The comparison with the chronological age showed a difference of 0.37 and 0.54 years for the two readers. The age estimate based on the cross-validated transition analysis showed a mean error of -0.28 years. Inter- and intra-rater agreement were good. In summary, it can be concluded that age estimation of hand bones with MR images is routinely applicable with the GP atlas as an alternative without ionizing radiation. However, in order to reduce the estimation error, a multi-factorial assessment based on examinations of several body regions is still recommended

Casimir energy and geometry : beyond the Proximity Force Approximation

We review the relation between Casimir effect and geometry, emphasizing deviations from the commonly used Proximity Force Approximation (PFA). We use to this aim the scattering formalism which is nowadays the best tool available for accurate and reliable theory-experiment comparisons. We first recall the main lines of this formalism when the mirrors can be considered to obey specular reflection. We then discuss the more general case where non planar mirrors give rise to non-specular reflection with wavevectors and field polarisations mixed. The general formalism has already been fruitfully used for evaluating the effect of roughness on the Casimir force as well as the lateral Casimir force or Casimir torque appearing between corrugated surfaces. In this short review, we focus our attention on the case of the lateral force which should make possible in the future an experimental demonstration of the nontrivial (i.e. beyond PFA) interplay of geometry and Casimir effect.Comment: corrected typos, added references, QFEXT'07 special issue in J. Phys.

The Scattering Approach to the Casimir Force

We present the scattering approach which is nowadays the best tool for describing the Casimir force in realistic experimental configurations. After reminders on the simple geometries of 1d space and specular scatterers in 3d space, we discuss the case of stationary arbitrarily shaped mirrors in electromagnetic vacuum. We then review specific calculations based on the scattering approach, dealing for example with the forces or torques between nanostructured surfaces and with the force between a plane and a sphere. In these various cases, we account for the material dependence of the forces, and show that the geometry dependence goes beyond the trivial {\it Proximity Force Approximation} often used for discussing experiments.Comment: Proceedings of the QFEXT'09 conference (Oklahoma, 2009