Bio-Hydrogen Production from Wastewater: A Comparative Study of Low Energy Intensive Production Processes

Billions of litres of wastewater are produced daily from domestic and industrial areas, and whilst wastewater is often perceived as a problem, it has the potential to be viewed as a rich source for resources and energy. Wastewater contains between four and five times more energy than is required to treat it, and is a potential source of bio-hydrogen—a clean energy vector, a feedstock chemical and a fuel, widely recognised to have a role in the decarbonisation of the future energy system. This paper investigates sustainable, low-energy intensive routes for hydrogen production from wastewater, critically analysing five technologies, namely photo-fermentation, dark fermentation, photocatalysis, microbial photo electrochemical processes and microbial electrolysis cells (MECs). The paper compares key parameters influencing H2 production yield, such as pH, temperature and reactor design, summarises the state of the art in each area, and highlights the scale-up technical challenges. In addition to H2 production, these processes can be used for partial wastewater remediation, providing at least 45% reduction in chemical oxygen demand (COD), and are suitable for integration into existing wastewater treatment plants. Key advancements in lab-based research are included, highlighting the potential for each technology to contribute to the development of clean energy. Whilst there have been efforts to scale dark fermentation, electro and photo chemical technologies are still at the early stages of development (Technology Readiness Levels below 4); therefore, pilot plants and demonstrators sited at wastewater treatment facilities are needed to assess commercial viability. As such, a multidisciplinary approach is needed to overcome the current barriers to implementation, integrating expertise in engineering, chemistry and microbiology with the commercial experience of both water and energy sectors. The review concludes by highlighting MECs as a promising technology, due to excellent system modularity, good hydrogen yield (3.6–7.9 L/L/d from synthetic wastewater) and the potential to remove up to 80% COD from influent streams

Solar photocatalysis for water disinfection: Materials and reactor design

As of 2010, access to clean drinking water is a human right according to UN regulations. Nevertheless, the number of people living in areas without safe drinking water is predicted to increase by three billion by the end of this decade. Several recent cases of E. coli and Cryptosporidium contamination in drinking water are also reported in a number of advanced countries. Therefore ensuring the potability of drinking water is urgent, but highly challenging to both the developing and developed world in the future. A combination of solar disinfection and photocatalysis technology offers real possibilities for removing lethal pathogenic microroganisms from drinking water. The time taken for the conventional SODIS process can be greatly reduced by semiconductor (e.g. TiO2, ZnO, nano-heterojunctions) based photocatalysis. This review addresses the fundamental reaction mechanism, advances in materials synthesis and selection and recent developments in the reactor design for solar energy driven photocatalysis using titanium dioxide. The major advantage of using photo-reactors is that they enhance disinfection by increasing photon flux into the photocatalyst. Other major factors affecting such efficiency of solar-based photocatalysis such as the illuminated volume/total volume ratio, catalyst load and flow rate, are discussed in detail. The significance of using immobilised catalysts over the catalyst powder in slurries is also highlighted. It is noted that, despite encouraging early field studies, the commercialisation and mass production of solar photocatalysis systems remains highly challenging. Recommendations for future directions for addressing issues such as mass transfer, requirement of a standard test method, photo-reactors design and visible light absorption by TiO2 coatings are also discussed