Brayton heat exchanger unit development program (alternate design)

A Brayton Heat Exchanger Unit Alternate Design (BHXU-Alternate) consisting of a recuperator, a heat sink heat exchanger, and a gas ducting system, was designed and fabricated. The design was formulated to provide a high performance unit suitable for use in a long-life Brayton-cycle powerplant. Emphasis was on double containment against external leakage and leakage of the organic coolant into the gas stream. A parametric analysis and design study was performed to establish the optimum component configurations to achieve low weight and size and high reliability, while meeting the requirements of high effectiveness and low pressure drop. Layout studies and detailed mechanical and structural design were performed to obtain a flight-type packaging arrangement, including the close-coupled integration of the BHXU-Alternate with the Brayton Rotating Unit (BRU)

Low-cycle fatigue evaluation for regeneratively cooled panels

Design data for regeneratively cooled panels from low cycle fatigue evaluation of Hastelloy X and Inconel 625 sheet and sandwich panel specimen

Large-area sheet task: Advanced dendritic-web-growth development

Thermally generated stresses in the growing web crystal were reduced. These stresses, which if too high cause the ribbon to degenerate, were reduced by a factor of three, resulting in the demonstrated growth of high-quality web crystals to widths of 5.4 cm. This progress was brought about chiefly by the application of thermal models to the development of low-stress growth configurations. A new temperature model was developed which can analyze the thermal effects of much more complex lid and top shield configurations than was possible with the old lumped shield model. Growth experiments which supplied input data such as actual shield temperature and melt levels were used to verify the modeling results. Desirable modifications in the melt level-sensing circuitry were made in the new experimental web growth furnace, and this furnace has been used to carry out growth experiments under steady-state conditions. New growth configurations were tested in long growth runs at Westinghouse AESD which produced wider, lower stress and higher quality web crystals than designs previously used

Prospective Analysis Spin- and CP-sensitive Variables in H -> ZZ -> l_1 l_1 l_2 l_2 with Atlas

A possibility to prove spin and CP-eigenvalue of a Standard Model (SM) Higgs boson is presented. We exploit angular correlations in the subsequent decay H -> ZZ -> 4l (muons or electrons) for Higgs masses above 200 GeV. We compare the angular distributions of the leptons originating from the SM Higgs with those resulting from decays of hypothetical particles with differing quantum numbers. We restrict our analysis to the use of the Atlas-detector which is one of two multi-purpose detectors at the upcoming 14 TeV proton-proton-collider (LHC) at CERN. By applying a fast simulation of the Atlas detector it can be shown that these correlations will be measured sufficiently well that consistency with the spin-CP hypothesis 0+ of the Standard Model can be verified and the 0- and 1+- can be ruled out with an integrated luminosity of 100 fb^-1.Comment: 25 pages, 9 figures Version 2: Minor changes made as requested by Atlas referee and Springer editor. Added a chapter where background subtraction is detaile

New Hope for the Working Poor: Effects After Eight Years for Families and Children

Implemented in 1994 in Milwaukee, New Hope provided full-time, low-wage workers with several benefits for three years: an earnings supplement, low-cost health insurance, and subsidized child care. A random assignment study shows positive effects for both adults and children, some of which persisted five years after the program ended

Physical Mechanisms for the Variable Spin-down of SGR 1900+14

We consider the physical implications of the rapid spindown of Soft Gamma Repeater 1900+14, and of the apparent "braking glitch", \Delta P/P = l x 10^-4, that was concurrent with the Aug. 27th giant flare. A radiation-hydrodynamical outflow associated with the flare could impart the required torque, but only if the dipole magnetic field is stronger than ~ 10^14 G and the outflow lasts longer and/or is more energetic than the observed X-ray flare. A positive period increment is also a natural consequence of a gradual, plastic deformation of the neutron star crust by an intense magnetic field, which forces the neutron superfluid to rotate more slowly than the crust. Sudden unpinning of the neutron vortex lines during the August 27th event would then induce a glitch opposite in sign to those observed in young pulsars, but of a much larger magnitude as a result of the slower rotation. The change in the persistent X-ray lightcurve following the August 27 event is ascribed to continued particle heating in the active region of that outburst. The enhanced X-ray output can be powered by a steady current flowing through the magnetosphere, induced by the twisting motion of the crust. The long term rate of spindown appears to be accelerated with respect to a simple magnetic dipole torque. Accelerated spindown of a seismically-active magnetar will occur when its persistent output of Alfven waves and particles exceeds its spindown luminosity. We suggest that SGRs experience some episodes of relative inactivity, with diminished spindown rates, and that such inactive magnetars are observed as Anomalous X-ray Pulsars (AXPs). The rapid reappearence of persistent X-ray emission following August 27 flare gives evidence against accretion-powered models.Comment: 24 pages, no figure

Large-area sheet task advanced dendritic web growth development

The thermal models used for analyzing dendritic web growth and calculating the thermal stress were reexamined to establish the validity limits imposed by the assumptions of the models. Also, the effects of thermal conduction through the gas phase were evaluated and found to be small. New growth designs, both static and dynamic, were generated using the modeling results. Residual stress effects in dendritic web were examined. In the laboratory, new techniques for the control of temperature distributions in three dimensions were developed. A new maximum undeformed web width of 5.8 cm was achieved. A 58% increase in growth velocity of 150 micrometers thickness was achieved with dynamic hardware. The area throughput goals for transient growth of 30 and 35 sq cm/min were exceeded

Planets in Spin-Orbit Misalignment and the Search for Stellar Companions

The discovery of giant planets orbiting close to their host stars was one of the most unexpected results of early exoplanetary science. Astronomers have since found that a significant fraction of these 'Hot Jupiters' move on orbits substantially misaligned with the rotation axis of their host star. We recently reported the measurement of the spin-orbit misalignment for WASP-79b by using data from the 3.9 m Anglo-Australian Telescope. Contemporary models of planetary formation produce planets on nearly coplanar orbits with respect to their host star's equator. We discuss the mechanisms which could drive planets into spin-orbit misalignment. The most commonly proposed being the Kozai mechanism, which requires the presence of a distant, massive companion to the star-planet system. We therefore describe a volume-limited direct-imaging survey of Hot Jupiter systems with measured spin-orbit angles, to search for the presence of stellar companions and test the Kozai hypothesis.Comment: Accepted for publication in the peer-reviewed proceedings of the 13th annual Australian Space Science Conferenc

The (In)Stability of Planetary Systems

We present results of numerical simulations which examine the dynamical stability of known planetary systems, a star with two or more planets. First we vary the initial conditions of each system based on observational data. We then determine regions of phase space which produce stable planetary configurations. For each system we perform 1000 ~1 million year integrations. We examine upsilon And, HD83443, GJ876, HD82943, 47UMa, HD168443, and the solar system (SS). We find that the resonant systems, 2 planets in a first order mean motion resonance, (HD82943 and GJ876) have very narrow zones of stability. The interacting systems, not in first order resonance, but able to perturb each other (upsilon And, 47UMa, and SS) have broad regions of stability. The separated systems, 2 planets beyond 10:1 resonance, (we only examine HD83443 and HD168443) are fully stable. Furthermore we find that the best fits to the interacting and resonant systems place them very close to unstable regions. The boundary in phase space between stability and instability depends strongly on the eccentricities, and (if applicable) the proximity of the system to perfect resonance. In addition to million year integrations, we also examined stability on ~100 million year timescales. For each system we ran ~10 long term simulations, and find that the Keplerian fits to these systems all contain configurations which may be regular on this timescale.Comment: 37 pages, 49 figures, 13 tables, submitted to Ap

Optimal indicators of socioeconomic status for health research

Objectives: This paper examines the relationship between various measures of SES and mortality for a representative sample of individuals. ; Methods: Data are from the Panel Study of Income Dynamics. Sample includes 3,734 individuals aged 45 and above who participated in the 1984 interview. Mortality was tracked between 1984 and 1994 and is related to SES indicators using Cox event-history regression models. ; Results: Wealth has the strongest associations with subsequent mortality, and these associations differ little by age and sex. Other economic measures, especially family-size-adjusted household income, have significant associations with mortality, particularly for nonelderly women. ; Conclusions: By and large, the economic components of SES have associations with mortality that are at least as strong as, and often stronger than, more conventional components (e.g., completed schooling, occupation).Income distribution