Advancing Geomicrobiology and Microbial Geochemistry

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/106754/1/eost2014EO100008.pd

Elemental sulfur coarsening kinetics

BACKGROUND: Elemental sulfur exists is a variety of forms in natural systems, from dissolved forms (noted as S8(diss) or in water as S8(aq)) to bulk elemental sulfur (most stable as α-S8). Elemental sulfur can form via several biotic and abiotic processes, many beginning with small sulfur oxide or polysulfidic sulfur molecules that coarsen into S8 rings that then coalesce into larger forms: [Formula: see text] Formation of elemental sulfur can be possible via two primary techniques to create an emulsion of liquid sulfur in water called sulfur sols that approximate some mechanisms of possible elemental sulfur formation in natural systems. These techniques produce hydrophobic (S8(Weimarn)) and hydrophilic (S8(polysulfide)) sols that exist as nanoparticle and colloidal suspensions. These sols begin as small sulfur oxide or polysulfidic sulfur molecules, or dissolved S8(aq) forms, but quickly become nanoparticulate and coarsen into micron sized particles via a combination of classical nucleation, aggregation processes, and/or Ostwald ripening. RESULTS: We conducted a series of experiments to study the rate of elemental sulfur particle coarsening using dynamic light scattering (DLS) analysis under different physical and chemical conditions. Rates of nucleation and initial coarsening occur over seconds to minutes at rates too fast to measure by DLS, with subsequent coarsening of S8(nano) and S8(sol) being strongly temperature dependent, with rates up to 20 times faster at 75°C compared to 20°C. The addition of surfactants (utilizing ionic and nonionic surfactants as model compounds) results in a significant reduction of coarsening rates, in addition to known effects of these molecules on elemental sulfur solubility. DLS and cryo-SEM results suggest coarsening is largely a product of ripening processes rather than particle aggregation, especially at higher temperatures. Fitting of the coarsening rate data to established models for Ostwald ripening additionally support this as a primary mechanism of coarsening. CONCLUSIONS: Elemental sulfur sols coarsen rapidly at elevated temperatures and experience significant effects on both solubility and particle coarsening kinetics due to interaction with surfactants. Growth of elemental sulfur nanoparticles and sols is largely governed by Ostwald ripening processes

Influence of Environmental Factors on the Production of MIB and Geosmin Metabolites by Bacteria in a Eutrophic Reservoir

Occurrences of odorous bacterial metabolites, 2‐methylisoborneol (MIB) and geosmin (GSM), in drinking water supply reservoirs are considered as a nuisance by the water industry and a source of complaints from customers. In Eagle Creek Reservoir, routine monitoring programs of MIB and GSM highlight intense odorous outbreaks during the spring season when high inflow discharges occur. Cyanobacteria have always been assumed to be source of these metabolites even if no known producers are present in raw water. A copper‐based algaecide is often used to terminate the metabolite production and the algal growth in the reservoir. The current study was designed to investigate and identify other biological sources involved in the biosynthesis of MIB and GSM metabolites as well as environmental factors that could be important triggers for the growth of bacterial producers. The community structure of the bacterioplankton was determined using a 16S rRNA gene sequencing technique, which showed that not only Cyanobacteria but Actinobacteria also were involved in the reservoir internal production. Planktothrix species was identified as the main source of GSM (p < 0.001) while Streptomyces (Actinobacteria) was very likely responsible of MIB (p < 0.01). Application of an algaecide disrupted GSM and the growth of Planktothrix but was less effective against MIB and Streptomyces . Statistical analyses revealed that MIB‐ and GSM‐causing bacteria were found abundant when the water was enriched with nitrogen, temperature cooler, and the water column mixed

Geochemistry and speciation of Fe(II) and Fe(III) in natural geothermal water, Iceland

The geochemistry of Fe(II) and Fe(III) was studied in natural geothermal waters in Iceland. Samples of surface and spring water and sub-boiling geothermal well water were collected and analyzed for Fe(II), Fe(III) and Fetotal concentrations. The samples had discharge temperatures in the range 27–99 °C, pH between 2.46 and 9.77 and total dissolved solids 155–1090 mg/L. The concentrations of Fe(II) and Fe(III) were determined in the <0.2 μm filtered and acidified fraction using a field-deployed ion chromatography spectrophotometry (IC-Vis) method within minutes to a few hours of sampling in order to prevent post-sampling changes. The concentrations of Fe(II) and Fe(III) were <0.1–130 μmoL/L and <0.2–42 μmoL/L, respectively. In-situ dialysis coupled with Fe(II) and Fe(III) determinations suggest that in some cases a significant fraction of Fe passing the standard <0.2 μm filtration method may be present in colloidal/particulate form. Therefore, such filter size may not truly represent the dissolved fraction of Fe but also nano-sized particles. The Fe(II) and Fe(III) speciation and Fetotal concentrations are largely influenced by the water pH, which in turn reflects the water type formed through various processes. In water having pH of ∼7–9, the total Fe concentrations were <2 μmoL/L with Fe(III) predominating. With decreasing pH, the total Fe concentrations increased with Fe(II) becoming increasingly important and predominating at pH < 3. In particular in waters having pH ∼6 and above, iron redox equilibrium may be approached with Fe(II) and Fe(III) possibly being controlled by equilibrium with respect to Fe minerals. In many acid waters, the Fe(II) and Fe(III) distribution may not have reached equilibrium and be controlled by the source(s), reaction kinetics or microbial reactions

Acid mine drainage biogeochemistry at Iron Mountain, California

The Richmond Mine at Iron Mountain, Shasta County, California, USA provides an excellent opportunity to study the chemical and biological controls on acid mine drainage (AMD) generation in situ, and to identify key factors controlling solution chemistry. Here we integrate four years of field-based geochemical data with 16S rRNA gene clone libraries and rRNA probe-based studies of microbial population structure, cultivation-based metabolic experiments, arsenopyrite surface colonization experiments, and results of intermediate sulfur species kinetics experiments to describe the Richmond Mine AMD system. Extremely acidic effluent (pH between 0.5 and 0.9) resulting from oxidation of approximately 1 × 10(5 )to 2 × 10(5 )moles pyrite/day contains up to 24 g/1 Fe, several g/1 Zn and hundreds of mg/l Cu. Geochemical conditions change markedly over time, and are reflected in changes in microbial populations. Molecular analyses of 232 small subunit ribosomal RNA (16S rRNA) gene sequences from six sites during a sampling time when lower temperature (<32°C), higher pH (>0.8) conditions predominated show the dominance of Fe-oxidizing prokaryotes such as Ferroplasma and Leptospirillum in the primary drainage communities. Leptospirillum group III accounts for the majority of Leptospirillum sequences, which we attribute to anomalous physical and geochemical regimes at that time. A couple of sites peripheral to the main drainage, "Red Pool" and a pyrite "Slump," were even higher in pH (>1) and the community compositions reflected this change in geochemical conditions. Several novel lineages were identified within the archaeal Thermoplasmatales order associated with the pyrite slump, and the Red Pool (pH 1.4) contained the only population of Acidithiobacillus. Relatively small populations of Sulfobacillus spp. and Acidithiobacillus caldus may metabolize elemental sulfur as an intermediate species in the oxidation of pyritic sulfide to sulfate. Experiments show that elemental sulfur which forms on pyrite surfaces is resistant to most oxidants; its solublization by unattached cells may indicate involvement of a microbially derived electron shuttle. The detachment of thiosulfate ([Image: see text]) as a leaving group in pyrite oxidation should result in the formation and persistence of tetrathionate in low pH ferric iron-rich AMD solutions. However, tetrathionate is not observed. Although a [Image: see text]-like species may form as a surface-bound intermediate, data suggest that Fe(3+ )oxidizes the majority of sulfur to sulfate on the surface of pyrite. This may explain why microorganisms that can utilize intermediate sulfur species are scarce compared to Fe-oxidizing taxa at the Richmond Mine site

The use of dithiothreitol for the quantitative analysis of elemental sulfur concentrations and isotopes in environmental samples

Determining the concentration and isotopic composition of elemental sulfur in modern and ancient environments is essential to improved interpretation of the mechanisms and pathways of sulfur utilization in biogeochemical cycles. Elemental sulfur can be extracted from sediment or water samples and quantified by converting to hydrogen sulfide. Alternatively, elemental sulfur concentrations can themselves be analyzed using HPLC and other methodologies; however, the preparation and analysis times can be long and these methods are not amenable to stable isotopic analysis. Current reduction methods involve the use of costly and specialized glassware in addition to toxins such as chromium chloride or cyanide to reduce the sulfur to hydrogen sulfide. The novel reduction method presented here uses dithiothreitol (DTT) as a less toxic reducing agent to obtain both elemental sulfur concentrations and isotopic composition from the same sample. The sample is dissolved in an aqueous or organic liquid medium and upon reaction with DTT, the elemental sulfur is volatilized as hydrogen sulfide and collected in a sulfide trap using an inexpensive gas extraction apparatus. The evolved sulfide concentrations can easily be measured for concentration, by absorbance spectrophotometery or voltammetry techniques, and then analyzed for sulfur isotopic composition. The procedure is quantitative at >93% recovery to dissolved elemental sulfur with no observed sulfur isotope fractionation during reduction and recovery. Controlled experiments also demonstrate that DTT is not reactive to sulfate, sulfite, pyrite, or organic sulfur

Enhanced detection of groundwater contamination from a leaking waste disposal site by microbial community profiles

Groundwater biogeochemistry is adversely impacted when municipal solid waste leachate, rich in nutrients and anthropogenic compounds, percolates into the subsurface from leaking landfills. Detecting leachate contamination using statistical techniques is challenging because well strategies or analytical techniques may be insufficient for detecting low levels of groundwater contamination. We sampled profiles of the microbial community from monitoring wells surrounding a leaking landfill using terminal restriction fragment length polymorphism (T-RFLP) targeting the 16S rRNA gene. Results show in situ monitoring of bacteria, archaea, and the family Geobacteraceae improves characterization of groundwater quality. Bacterial T-RFLP profiles showed shifts correlated to known gradients of leachate and effectively detected changes along plume fringes that were not detected using hydrochemical data. Experimental sediment microcosms exposed to leachate-contaminated groundwater revealed a shift from a -Proteobacteria and Actinobacteria dominated community to one dominated by Firmicutes and δ-Proteobacteria. This shift is consistent with the transition from oxic conditions to an anoxic, iron-reducing environment as a result of landfill leachate-derived contaminants and associated redox conditions. We suggest microbial communities are more sensitive than hydrochemistry data for characterizing low levels of groundwater contamination and thus provide a novel source of information for optimizing detection and long-term monitoring strategies at landfill sites. Copyright 2010 by the American Geophysical Union

Sulfur and oxygen isotope insights into sulfur cycling in shallow-sea hydrothermal vents, Milos, Greece

Shallow-sea (5 m depth) hydrothermal venting off Milos Island provides an ideal opportunity to target transitions between igneous abiogenic sulfide inputs and biogenic sulfide production during microbial sulfate reduction. Seafloor vent features include large (>1 m2) white patches containing hydrothermal minerals (elemental sulfur and orange/yellow patches of arsenic-sulfides) and cells of sulfur oxidizing and reducing microorganisms. Sulfide-sensitive film deployed in the vent and non-vent sediments captured strong geochemical spatial patterns that varied from advective to diffusive sulfide transport from the subsurface. Despite clear visual evidence for the close association of vent organisms and hydrothermalism, the sulfur and oxygen isotope composition of pore fluids did not permit delineation of a biotic signal separate from an abiotic signal. Hydrogen sulfide (H2S) in the free gas had uniform δ34S values (2.5 ± 0.28‰, n = 4) that were nearly identical to pore water H2S (2.7 ± 0.36‰, n = 21). In pore water sulfate, there were no paired increases in δ34SSO4 and δ18OSO4 as expected of microbial sulfate reduction. Instead, pore water δ34SSO4 values decreased (from approximately 21‰ to 17‰) as temperature increased (up to 97.4°C) across each hydrothermal feature. We interpret the inverse relationship between temperature and δ34SSO4 as a mixing process between oxic seawater and 34S-depleted hydrothermal inputs that are oxidized during seawater entrainment. An isotope mass balance model suggests secondary sulfate from sulfide oxidation provides at least 15% of the bulk sulfate pool. Coincident with this trend in δ34SSO4, the oxygen isotope composition of sulfate tended to be 18O-enriched in low pH (75°C) pore waters. The shift toward high δ18OSO4 is consistent with equilibrium isotope exchange under acidic and high temperature conditions. The source of H2S contained in hydrothermal fluids could not be determined with the present dataset; however, the end-member δ34S value of H2S discharged to the seafloor is consistent with equilibrium isotope exchange with subsurface anhydrite veins at a temperature of ~300°C. Any biological sulfur cycling within these hydrothermal systems is masked by abiotic chemical reactions driven by mixing between low-sulfate, H2S-rich hydrothermal fluids and oxic, sulfate-rich seawater

Spatially resolved capture of hydrogen sulfide from the water column and sedimentary pore waters for abundance and stable isotopic analysis

Sulfur cycling is ubiquitous in sedimentary environments, where it plays a major role in mediating carbon remineralization and impacts both local and global redox budgets. Microbial sulfur cycling is dominated by metabolic activity that either produces (e.g., sulfate reduction, disproportionation) or consumes (sulfide oxidation) hydrogen sulfide (H2S). As such, improved constraints on the production, distribution, and consumption of H2S in the natural environment will increase our understanding of microbial sulfur cycling. These different microbial sulfur metabolisms are additionally associated with particular stable isotopic fractionations. Coupling measurements of the isotopic composition of the sulfide with its distribution can provide additional information about environmental conditions and microbial ecology. Here we investigate the kinetics of sulfide capture on photographic films as a way to document the spatial distribution of sulfide in complex natural environments as well as for in situ capture of H2S for subsequent stable isotopic analysis. Laboratory experiments and timed field deployments demonstrate the ability to infer ambient sulfide abundances from the yield of sulfide on the films. This captured sulfide preserves the isotopic composition of the ambient sulfide, offset to slightly lower δ34S values by ~ 1.2 ± 0.5‰ associated with the diffusion of sulfide into the film and subsequent reaction with silver to form Ag2S precipitates. The resulting data enable the exploration of cm-scale lateral heterogeneity that complement most geochemical profiles using traditional techniques in natural environments. Because these films can easily be deployed over a large spatial area, they are also ideal for real-time assessment of the spatial and temporal dynamics of a site during initial reconnaissance and for integration over long timescales to capture ephemeral processes