Magnetic suspension options for spacecraft inertia-wheel applications

Design criteria for spacecraft inertia-wheel suspensions are listed. The advantages of magnetic suspensions over other suspension types for spacecraft inertia-wheel applications are cited along with the functions performed by magnetic suspension. The common designs for magnetic suspensions are enumerated. Materials selection of permanent magnets and core materials is considered

Two-Color Terawatt Laser System For High-Intensity Laser-Plasma Experiments

We report a two-color terawatt laser system for use in controlling laser-plasma instabilities. The system includes a commercial 45 TW Ti:Sapphire laser system at 800 nm, temporally synchronized with a 1 TW CPA Raman-Ti:Sapphire hybrid laser centered at 873nm that we designed and built to complement the 800 nm system. The two-color system will be used to seed, enhance, suppress, or otherwise control a variety of instabilities which arise in laser-plasma interactions.Physic

Modelling and Control of an Annular Momentum Control Device

The results of a modelling and control study for an advanced momentum storage device supported on magnetic bearings are documented. The control challenge posed by this device lies in its dynamics being such a strong function of flywheel rotational speed. At high rotational speed, this can lead to open loop instabilities, resulting in requirements for minimum and maximum control bandwidths and gains for the stabilizing controllers. Using recently developed analysis tools for systems described by complex coefficient differential equations, the closed properties of the controllers were analyzed and stability properties established. Various feedback controllers are investigated and discussed. Both translational and angular dynamics compensators are developed, and measures of system stability and robustness to plant and operational speed variations are presented

Performance of ceramic superconductors in magnetic bearings

Magnetic bearings are large-scale applications of magnet technology, quite similar in certain ways to synchronous machinery. They require substantial flux density over relatively large volumes of space. Large flux density is required to have satisfactory force density. Satisfactory dynamic response requires that magnetic circuit permeances not be too large, implying large air gaps. Superconductors, which offer large magnetomotive forces and high flux density in low permeance circuits, appear to be desirable in these situations. Flux densities substantially in excess of those possible with iron can be produced, and no ferromagnetic material is required. Thus the inductance of active coils can be made low, indicating good dynamic response of the bearing system. The principal difficulty in using superconductors is, of course, the deep cryogenic temperatures at which they must operate. Because of the difficulties in working with liquid helium, the possibility of superconductors which can be operated in liquid nitrogen is thought to extend the number and range of applications of superconductivity. Critical temperatures of about 98 degrees Kelvin were demonstrated in a class of materials which are, in fact, ceramics. Quite a bit of public attention was attracted to these new materials. There is a difficulty with the ceramic superconducting materials which were developed to date. Current densities sufficient for use in large-scale applications have not been demonstrated. In order to be useful, superconductors must be capable of carrying substantial currents in the presence of large magnetic fields. The possible use of ceramic superconductors in magnetic bearings is investigated and discussed and requirements that must be achieved by superconductors operating at liquid nitrogen temperatures to make their use comparable with niobium-titanium superconductors operating at liquid helium temperatures are identified

CONSUMER KNOWLEDGE OF SELECTED NUTRIENT CONTENT OF NINE FRESH MEAT CUTS

The U.S. Department of Agriculture, the Food and Drug Administration, and the medical profession, among others, have attempted to broaden consumers' knowledge of the nutritive content of foods. Retailers provide information by supplying point-of-purchase nutrition information and/or nutrition labels on fresh meats. The availability of nutrition information on packaged fresh meats is relatively new. A survey of Louisiana households provided estimates of their knowledge of the fat, cholesterol, and protein content of selected combinations of fresh beef, pork, chicken, and turkey meats. Permutation analysis and tabular analyses were used to assess households' nutrition knowledge of the selected fresh meats.beef, chicken, consumer knowledge, nutrient content, permutation analysis, pork, turkey, Food Consumption/Nutrition/Food Safety,

Analytic height correlation function of rough surfaces derived from light scattering

We derive an analytic expression for the height correlation function of a rough surface based on the inverse wave scattering method of Kirchhoff theory. The expression directly relates the height correlation function to diffuse scattered intensity along a linear path at fixed polar angle. We test the solution by measuring the angular distribution of light scattered from rough silicon surfaces, and comparing extracted height correlation functions to those derived from atomic force microscopy (AFM). The results agree closely with AFM over a wider range of roughness parameters than previous formulations of the inverse scattering problem, while relying less on large-angle scatter data. Our expression thus provides an accurate analytical equation for the height correlation function of a wide range of surfaces based on measurements using a simple, fast experimental procedure.Comment: 6 pages, 5 figures, 1 tabl

Single-Shot Visualization Of Evolving Laser- Or Beam-Driven Plasma Wakefield Accelerators

We introduce Frequency-Domain Tomography (FDT) for visualizing sub-ps evolution of light-speed refractive index structures in a single shot. As a prototype demonstration, we produce single-shot tomographic movies of self-focusing, filamenting laser pulses propagating in a transparent Kerr medium. We then discuss how to adapt FDT to visualize evolving laser-or beam-driven plasma wakefields of current interest to the advanced accelerator community. For short (L similar to 1 cm), dense (n(e) similar to 10(19) cm(-3)) plasmas, the key challenge is broadening probe bandwidth sufficiently to resolve plasma-wavelength-size structures. For long (L similar to 10 to 100 cm), tenuous (n(e) similar to 10(17) cm(-3)) plasmas, probe diffraction from the evolving wake becomes the key challenge. We propose and analyze solutions to these challenges.Physic

Frequency-Domain Streak Camera And Tomography For Ultrafast Imaging Of Evolving And Channeled Plasma Accelerator Structures

We demonstrate a prototype Frequency Domain Streak Camera (FDSC) that can capture the picosecond time evolution of the plasma accelerator structure in a single shot. In our prototype Frequency-Domain Streak Camera, a probe pulse propagates obliquely to a sub-picosecond pump pulse that creates an evolving nonlinear index >bubble> in fused silica glass, supplementing a conventional Frequency Domain Holographic (FDH) probe-reference pair that co-propagates with the >bubble>. Frequency Domain Tomography (FDT) generalizes Frequency-Domain Streak Camera by probing the >bubble> from multiple angles and reconstructing its morphology and evolution using algorithms similar to those used in medical CAT scans. Multiplexing methods (Temporal Multiplexing and Angular Multiplexing) improve data storage and processing capability, demonstrating a compact Frequency Domain Tomography system with a single spectrometer.Physic

Femtosecond Pump-Probe Diagnostics Of Preformed Plasma Channels

We report on recent ultrafast pump-probe experiments 28 in He plasma waveguides using 800 nm, 80 fs pump pulses of 0.2 x 1018 W/cm2 peak guided intensity, and single orthogonally-polarized 800 nm probe pulses with similar to0.1% of pump intensity. The main results are: (1) We observe frequency-domain interference between the probe and a weak, depolarized component of the pump that differs substantially in mode shape from the injected pump pulse; (2) we observe spectral blue-shifts in the transmitted probe that are not evident in the transmitted pump. The evidence indicates that pump depolarization and probe blue-shifts both originate near the channel entrance.Physic

Cost Effectiveness of Bio-Gas Systems for Dairy Farms

Considerable attention has recently been focused on the development of farm management practices that utilize the total resource potential of animal wastes. In addition to the fertilizer value of manure, energy in the form of bio-gas can be generated from manure wastes by an anaerobic digestion process. The purpose of this economic analysis was to evaluate the feasibility of producing energy from the anaerobic digestion of dairy-cow manure. Anaerobic digestion systems were rationally designed for several farm management practices on Vermont dairy farms. These designs were sized to accommodate dairy herds of 20, 50, 100, and 200 cows for both free- and tie-stall arrangements. The realistic evaluation of the potential of any energy source must include a cost effectiveness analysis. This 1974 economic analysis, with selected 1977 cost updatings, included considerations of both the total annual financial investment and the unit cost of net energy production. Minimum unit costs of net energy production for 1977 prices are approximately $0.19 per kwh for the 20-cow operation, but these values decrease with increasing herd size to$0.05 per kwh for the 200-cow dairy farm. At the present time, the generation of bio-gas from the anaerobic digestion of dairy farm manures becomes economically feasible as an alternate source of energy for dairy farms in excess of 200 cows