2 research outputs found

    Rapid and near-complete dissolution of wood lignin at ≤80°C by a recyclable acid hydrotrope

    No full text
    We report the discovery of the hydrotropic properties of a recyclable aromatic acid, p-toluenesulfonic acid (p-TsOH), for potentially low-cost and efficient fractionation of wood through rapid and near-complete dissolution of lignin. Approximately 90% of poplar wood (NE222) lignin can be dissolved at 80 degrees C in 20 min. Equivalent delignification using known hydrotropes, such as aromatic salts, can be achieved only at 150 degrees C or higher for more than 10 hours or at 150 degrees C for 2 hours with alkaline pulping. p-TsOH fractionated wood into two fractions: (i) a primarily cellulose-rich water-insoluble solid fraction that can be used for the production of high-value building blocks, such as dissolving pulp fibers, lignocellulosic nanomaterials, and/or sugars through subsequent enzymatic hydrolysis; and (ii) a spent acid liquor stream containing mainly dissolved lignin that can be easily precipitated as lignin nanoparticles by diluting the spent acid liquor to below the minimal hydrotrope concentration. Our nuclear magnetic resonance analyses of the dissolved lignin revealed that p-TsOH can depolymerize lignin via ether bond cleavage and can separate carbohydrate-free lignin from the wood. p-TsOH has a relatively low water solubility, which can facilitate efficient recovery using commercially proven crystallization technology by cooling the concentrated spent acid solution to ambient temperatures to achieve environmental sustainability through recycling of p-TsOH.Peer reviewe

    Willow bark proanthocyanidins with potential for water treatment:chemical characterization and zinc/bisphenol A removal

    No full text
    Abstract This study investigates the chemical structure of proanthocyanidin-rich crude extracts from willow bark and these materials were tested initially as adsorbents for artificial (waste)water treatment. The crude extracts were obtained through mild water extraction and the colorant fractions were further chromatographically fractionated to understand the chemical structure of the willow bark proanthocyanidins. The chemistry of crude extracts and purified fractions were investigated using nuclear magnetic resonance (NMR) and ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Both NMR (liquid and solid-state) and UPLC-MS/MS suggest that the crude extracts constitute of interflavan linked flavan-3-ols, i.e. proanthocyanidins with both procyanidin (PC)-type and prodelphinidin (PD)-type subunits, with the PC/PD ratio of approximately 2.3–2.5. PD-type proanthocyanidins were detected from the purified colorant fractions only with UPLC-MS/MS. Both the UPLC-MS/MS and size exclusion chromatography suggest that the crude extracts have an average oligomerization degree of roughly 5–6 flavan-3-ol units. Adsorption experiments showed that the activated foams made of crude extracts were effective in removing both zinc and Bisphenol A (BPA) with removal efficiencies of roughly 80–90% and thus these willow bark-derived proanthocyanidins are promising in water treatment. The significance of this study suggests the upgrading use of crude extracts for water treatment could significantly improve the value of willow bark
    corecore