76 research outputs found
A Design Aid for Determining Width of Filter Strips
Watershed planners need a tool for determining width of filter strips that is accurate enough for developing cost-effective site designs and easy enough to use for making quick determinations on a large number and variety of sites. This study employed the process-based Vegetative Filter Strip Model to evaluate the relationship between filter strip width and trapÂŹping efficiency for sediment and water and to produce a design aid for use where specific water quality targets must be met. Model simulations illustrate that relatively narrow filter strips can have high impact in some situations, while in others even a modest impact cannot be achieved at any practical width. A graphical design aid was developed for estimating the width needed to achieve target trapping efficiencies for different pollutants under a broad range of agricultural site conditions. Using the model simulations for sediment and water, a graph was produced containing a family of seven lines that divide the full range of possible relationships between width and trapping efficiency into fairly even increments. Simple rules guide the selection of one line that best describes a given field situation by considering field length and cover management, slope, and soil texture. Relationships for sediment-bound and dissolved pollutants are interpreted from the modeled relationships for sediment and water. Interpolation between lines can refine the results and account for additional variables, if needed. The design aid is easy to use, accounts for several major variables that determine filter strip performance, and is based on a validated, process-based, mathematical model. This design aid strikes a balance between accuracy and utility that fills a wide gap between existing design guides and mathematical models
A Design Aid for Determining Width of Filter Strips
Watershed planners need a tool for determining width of filter strips that is accurate enough for developing cost-effective site designs and easy enough to use for making quick determinations on a large number and variety of sites. This study employed the process-based Vegetative Filter Strip Model to evaluate the relationship between filter strip width and trapÂŹping efficiency for sediment and water and to produce a design aid for use where specific water quality targets must be met. Model simulations illustrate that relatively narrow filter strips can have high impact in some situations, while in others even a modest impact cannot be achieved at any practical width. A graphical design aid was developed for estimating the width needed to achieve target trapping efficiencies for different pollutants under a broad range of agricultural site conditions. Using the model simulations for sediment and water, a graph was produced containing a family of seven lines that divide the full range of possible relationships between width and trapping efficiency into fairly even increments. Simple rules guide the selection of one line that best describes a given field situation by considering field length and cover management, slope, and soil texture. Relationships for sediment-bound and dissolved pollutants are interpreted from the modeled relationships for sediment and water. Interpolation between lines can refine the results and account for additional variables, if needed. The design aid is easy to use, accounts for several major variables that determine filter strip performance, and is based on a validated, process-based, mathematical model. This design aid strikes a balance between accuracy and utility that fills a wide gap between existing design guides and mathematical models
Filter strip performance and processes for different vegetation, widths, and contaminants
Filter strips are widely prescribed to reduce contaminants in surface runoff from agricultural fields. Tbis study compared performance of different filter strip designs on several contaminants and evaluated the contribnting processes. Different vegetation types and widths were investigated using simulated runoff event on large plots (3 m X 7.5 or 15 m) having fine-textured soil and a 6 to 7% slope. Filter strips 7.5 and 15 m wide downslope greatly reduced concentrations of sediment in runoff (76-93%) and contaminants strongly associated with sediment (total P, 55-79%; permethrin, 27-83% [(3-phenoxyphenyl) methyl (±)-cis, trans-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropane carboxylate ]). They had less effect on concentrations of primarily dissolved contaminants [atrazine, -5-43% (2-chloro-4-ethylamino-6- isopropylamino-s-triazine); alachlor, 10-61% [2-chloro-2\u276\u27 -diethylN-( methoxymethyl) acetanilide]; nitrate, 24-48%; dissolved P, 19- 43%; bromide, 13-31 %]. Dilution of runoff by rainfall accounted for most of the rednction of concentration of dissolved contaminants. Infiltration (36-82% ofrunoffvolume) substantially reduced the mass of contaminants exiting the filter strips. Doubling filter strip width from 7.5 to 15 m doubled infiltration and dilution, but did not improve sediment settling. Y onng trees and shrubs planted in the lower onehalf of otherwise grass strips had no impact on filter performance. Compared with cultivated sorghum [Sorghum bicolor (L.) Moench] grass clearly reduced concentrations of sediment and associated contaminants in runoff, but not volume of runoff and concentration of dissolved contaminants. Settling, infiltration, and dilution processes can explain performance differences among pollutant types and filter strip designs
MODELING SEDIMENT TRAPPING IN A VEGETATIVE FILTER ACCOUNTING FOR CONVERGING OVERLAND FLOW
Vegetative filters (VF) are used to remove sediment and other pollutants from overland flow. When modeling the hydrology of VF, it is often assumed that overland flow is planar, but our research indicates that it can be two-dimensional with converging and diverging pathways. Our hypothesis is that flow convergence will negatively influence the sediment trapping capability of VF. The objectives were to develop a two-dimensional modeling approach for estimating sediment trapping in VF and to investigate the impact of converging overland flow on sediment trapping by VF. In this study, the performance of a VF that has field-scale flow path lengths with uncontrolled flow direction was quantified using field experiments and hydrologic modeling. Simulations of water flow processes were performed using the physically based, distributed model MIKE SHE. A modeling approach that predicts sediment trapping and accounts for converging and diverging flow was developed based on the University of Kentucky sediment filtration model. The results revealed that as flow convergence increases, filter performance decreases, and the impacts are greater at higher flow rates and shorter filter lengths. Convergence that occurs in the contributing field (in-field) upstream of the buffer had a slightly greater impact than convergence that occurred in the filter (in-filter). An area-based convergence ratio was defined that relates the actual flow area in a VF to the theoretical flow area without flow convergence. When the convergence ratio was 0.70, in-filter convergence caused the sediment trapping efficiency to be reduced from 80% for the planar flow condition to 64% for the converging flow condition. When an equivalent convergence occurred in-field, the sediment trapping efficiency was reduced to 57%. Thus, not only is convergence important but the location where convergence occurs can also be important
The influence of the ectomycorrhizal fungus Rhizopogon subareolatus on growth and nutrient element localisation in two varieties of Douglas fir (Pseudotsuga menziesii var. menziesii and var. glauca) in response to manganese stress
Acidification of forest ecosystems leads to increased plant availability of the micronutrient manganese (Mn), which is toxic when taken up in excess. To investigate whether ectomycorrhizas protect against excessive Mn by improving plant growth and nutrition or by retention of excess Mn in the hyphal mantle, seedlings of two populations of Douglas fir (Pseudotsuga menziesii), two varieties, one being menziesii (DFM) and the other being glauca (DFG), were inoculated with the ectomycorrhizal fungus Rhizopogon subareolatus in sand cultures. Five months after inoculation, half of the inoculated and non-inoculated seedlings were exposed to excess Mn in the nutrient solution for further 5Â months. At the end of this period, plant productivity, nutrient concentrations, Mn uptake and subcellular compartmentalisation were evaluated. Non-inoculated, non-stressed DFM plants produced about 2.5 times more biomass than similarly treated DFG. Excess Mn in the nutrient solution led to high accumulation of Mn in needles and roots but only to marginal loss in biomass. Colonisation with R. subareolatus slightly suppressed DFM growth but strongly reduced that of DFG (â50%) despite positive effects of mycorrhizas on plant phosphorus nutrition. Growth reductions of inoculated Douglas fir seedlings were unexpected since the degree of mycorrhization was not high, i.e. ca. 30% in DFM and 8% in DFG. Accumulation of high Mn was not prevented in inoculated seedlings. The hyphal mantle of mycorrhizal root tips accumulated divalent cations such as Ca, but not Mn, thus not providing a barrier against excessive Mn uptake into the plants associated with R. subareolatus
Growth Response of Drought-Stressed Pinus sylvestris Seedlings to Single- and Multi-Species Inoculation with Ectomycorrhizal Fungi
Many trees species form symbiotic associations with ectomycorrhizal (ECM) fungi, which improve nutrient and water acquisition of their host. Until now it is unclear whether the species richness of ECM fungi is beneficial for tree seedling performance, be it during moist conditions or drought. We performed a pot experiment using Pinus sylvestris seedlings inoculated with four selected ECM fungi (Cenococcum geophilum, Paxillus involutus, Rhizopogon roseolus and Suillus granulatus) to investigate (i) whether these four ECM fungi, in monoculture or in species mixtures, affect growth of P. sylvestris seedlings, and (ii) whether this effect can be attributed to species number per se or to species identity. Two different watering regimes (moist vs. dry) were applied to examine the context-dependency of the results. Additionally, we assessed the activity of eight extracellular enzymes in the root tips. Shoot growth was enhanced in the presence of S. granulatus, but not by any other ECM fungal species. The positive effect of S. granulatus on shoot growth was more pronounced under moist (threefold increase) than under dry conditions (twofold increase), indicating that the investigated ECM fungi did not provide additional support during drought stress. The activity of secreted extracellular enzymes was higher in S. granulatus than in any other species. In conclusion, our findings suggest that ECM fungal species composition may affect seedling performance in terms of aboveground biomass
Recommended from our members
Viewpoint: Applying riparian buffers to Great Plains rangelands
Better management of riparian areas has been promoted by public agencies for almost 2 decades. Recently, however, efforts have been intensified because serious conservation concerns remain. To achieve mandated conservation goals for water quality and wildlife will require widespread acceptance and application of recommended riparian practices. Success of riparian programs in the Great Plains will require recognition of differences between the interests of public agencies and those of private landowners and the development of an approach to riparian management that can accommodate both.The Journal of Range Management archives are made available by the Society for Range Management and the University of Arizona Libraries. Contact [email protected] for further information.Migrated from OJS platform August 202
Filter strip performance and processes for different vegetation, widths, and contaminants
Filter strips are widely prescribed to reduce contaminants in surface runoff from agricultural fields. Tbis study compared performance of different filter strip designs on several contaminants and evaluated the contribnting processes. Different vegetation types and widths were investigated using simulated runoff event on large plots (3 m X 7.5 or 15 m) having fine-textured soil and a 6 to 7% slope. Filter strips 7.5 and 15 m wide downslope greatly reduced concentrations of sediment in runoff (76-93%) and contaminants strongly associated with sediment (total P, 55-79%; permethrin, 27-83% [(3-phenoxyphenyl) methyl (±)-cis, trans-3-(2,2-dichloroethenyl)-2,2-dimethylcyclopropane carboxylate ]). They had less effect on concentrations of primarily dissolved contaminants [atrazine, -5-43% (2-chloro-4-ethylamino-6- isopropylamino-s-triazine); alachlor, 10-61% [2-chloro-2\u276\u27 -diethylN-( methoxymethyl) acetanilide]; nitrate, 24-48%; dissolved P, 19- 43%; bromide, 13-31 %]. Dilution of runoff by rainfall accounted for most of the rednction of concentration of dissolved contaminants. Infiltration (36-82% ofrunoffvolume) substantially reduced the mass of contaminants exiting the filter strips. Doubling filter strip width from 7.5 to 15 m doubled infiltration and dilution, but did not improve sediment settling. Y onng trees and shrubs planted in the lower onehalf of otherwise grass strips had no impact on filter performance. Compared with cultivated sorghum [Sorghum bicolor (L.) Moench] grass clearly reduced concentrations of sediment and associated contaminants in runoff, but not volume of runoff and concentration of dissolved contaminants. Settling, infiltration, and dilution processes can explain performance differences among pollutant types and filter strip designs
- âŠ