Photomicrographic Investigation of Spontaneous Freezing Temperatures of Supercooled Water Droplets

A photomicrographic technique for investigating eupercooled. water droplets has been devised and. used. to determine the spontaneous freezing temperatures of eupercooled. water droplets of the size ordinarily found. in the atmosphere. The freezing temperatures of 4527 droplets ranging from 8.75 to 1000 microns in diameter supported on a platinum surface and 571 droplets supported on copper were obtained. The average spontaneous freezing temperature decreased with decrease in the size of the droplets. The effect of size on the spontaneous freezing temperature was particularly marked below 60 microns. Frequency-distribution curves of the spontaneous freezing temperatures observed for droplets of a given size were obtained. Although no droplet froze at a temperature above 20 0 F, all droplets melted at 32 F. Results obtained with a copper support did not differ essentially from those obtained with a platinum surface

Deformed Heisenberg algebra and minimal length

A one-dimensional deformed Heisenberg algebra $[X,P]=if(P)$ is studied. We answer the question: For what function of deformation $f(P)$ there exists a nonzero minimal uncertainty in position (minimal length). We also find an explicit expression for the minimal length in the case of arbitrary function of deformation.Comment: to be published in JP

Structure of 10Be from the 12C 12C,14O 10Be reaction

The 12C 12C,14O two proton pick up reaction has been measured at 211.4 MeV incident energy to study the structure of states of 10Be up to excitation energies of 12 MeV. The measured partial angular distributions show pronounced oscillatory shapes, which were described by coupled reaction channels calculations. Spin parity assignments could be derived from these characteristic shapes and two definite assignments have been made. The state at 11.8 MeV has been identified as the 4 member of the ground state band, and the state at 10.55 MeV is assigned J pi 3 . At 5.96 MeV only the 1 1 member of the known 2 2 1 1 doublet is populated. The angular distribution of the peak at 9.50 MeV, which consists of several unresolved states, has been unfolded using contributions from known states at 9.56 MeV, 2 , and 9.27 MeV, 4 . The inclusion of a state at 9.4 MeV reported by Daito it et al. from the 10B t,3He 10Be reaction and tentatively assigned 3 improved the fit considerably. A K 2 band is formed with the 2 2 state as the band head and the 3 state as the second member. The structures of the K pi 0 1, 2 2, and 1 1 bands are discusse

Bubble wall velocities in the Standard Model and beyond

We present results for the bubble wall velocity and bubble wall thickness during a cosmological first-order phase transition in a condensed form. Our results are for minimal extensions of the Standard Model but in principle are applicable to a much broader class of settings. Our first assumption about the model is that only the electroweak Higgs is obtaining a vacuum expectation value during the phase transition. The second is that most of the friction is produced by electroweak gauge bosons and top quarks. Under these assumptions the bubble wall velocity and thickness can be deduced as a function of two equilibrium properties of the plasma: the strength of the phase transition and the pressure difference along the bubble wall

The first massive compact companion in a wide orbit around a hot subdwarf star

We report the discovery of the first hot subdwarf B (sdB) star with a massive compact companion in a wide ($P=892.5\pm60.2\,{\rm d}$) binary system. It was discovered based on an astrometric binary solution provided by the Gaia mission Data Release 3. We performed detailed analyses of the spectral energy distribution (SED) as well as spectroscopic follow-up observations and confirm the nature of the visible component as a sdB star. The companion is invisible despite of its high mass of $M_{\rm comp}=1.50_{-0.45}^{+0.37}\,M_{\rm \odot}$. A main sequence star of this mass would significantly contribute to the SED and can be excluded. The companion must be a compact object, either a massive white dwarf or a neutron star. Stable Roche lobe overflow to the companion likely led to the stripping of a red giant and the formation of the sdB, the hot and exposed helium core of the giant. Based on very preliminary data, we estimate that $\sim9\%$ of the sdBs might be formed through this new channel. This binary might also be the prototype for a new progenitor class of supernovae type Ia, which has been predicted by theory.Comment: 11 pages, accepted for publication in A&

Effects by Paramagnetic and Diamagnetic Materials in a 1.5-Tesla Highfield Magnetic Resonance Imaging System (MRI)

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.Dieser Artikel zeigt die Ergebnisse einer experimentellen Untersuchung des Störeinflusses von paramagnetischen und diamagnetischen Materialien auf die Bildgebung in einem geschlossenen 1,5-Tesla-Hochfeld-Magnetresonanztomographen(MRT). Mit drei verschiedenen Sequenztypen (SE, GE, EPI) wurden unterschiedlich große metallische und nichtmetallische Werkstückprofile hinsichtlich der entstehenden Artefakte untersucht. Zur Darstellung der Artefakte wurde ein mit Gd-Mn-Lösung gefüllter Kunststoffbehälter (Phantom) verwendet, zu dem die zu untersuchenden Materialien während der Versuchsdurchführung in definierten Abständen parallel verschoben wurden. Die Auswertung der Schnittbilder erfolgte in transversaler und sagittaler Untersuchungsebene und ergab, daß Aluminium- und Kunststoffprofile auch bei sehr geringem Abstand zum Phantom die kleinsten Bildstörungen verursachten. Besonders starke Artefakte wurden bei den untersuchten Stahl- und Kupferprofilen festgestellt. Bei einem Vergleich der angewendeten Sequenztypen konnte nachgewiesen werden, daß besonders die SE-Sequenz, trotz der teilweise stark variierenden Materialprofile, eine geringere Artefaktanfälligkeit und somit eine höhere Stabilität in der Bildgebung im Gegensatz zur GE- und EPI-Sequenz aufwies. Diese Untersuchungen wurden im Anschluß an eine intensive Literaturstudie (Internet, Medline, Meditec) durchgeführt. Relevante Publikationsquellen gibt es bisher nur sehr wenige.This article shows the results of an experimental investigation of the interference by paramagnetic and diamagnetic materials on imaging in a closed 1.5 Tesla high field magnetic resonance imaging System(MRI). For different types of sequences (SE, GE, EPI) the effects of metal and non-metal profiles in producing artefacts were investigated. A phantom (plastictrunk) filled with Gd-Mn-solution was used for representation of the artefacts. The materials analysed were placed parallel to the phantom at predetermined distances. The images were obtained in transverse and sagittal planes and analysed with respect to the resulting artefacts.The results show that aluminium and polymer profiles produce the weakest artefacts, even when the material is positioned close to the phantom. A comparison of the sequence types shows that the SE-sequence has a low sensitivity to artefacts, despite the great profile variation in size and shape. The SE-sequence accordingly showed a higher imaging stability scompared with the GE- and EPI-sequences. Steel and copper produced the strongest artefacts. The examination was begun after an intensive study of the literature(Internet, Medline, Meditec). So far have been few publications on this subject

A second Higgs doublet in the early universe: baryogenesis and gravitational waves

We show that simple Two Higgs Doublet models still provide a viable explanation for the matter-antimatter asymmetry of the Universe via electroweak baryogenesis, even after taking into account the recent order-of-magnitude improvement on the electron-EDM experimental bound by the ACME Collaboration. Moreover we show that, in the region of parameter space where baryogenesis is possible, the gravitational wave spectrum generated at the end of the electroweak phase transition is within the sensitivity reach of the future space-based interferometer LISA

The Higgs vacuum uplifted: revisiting the electroweak phase transition with a second Higgs doublet

The existence of a second Higgs doublet in Nature could lead to a cosmological first order electroweak phase transition and explain the origin of the matter-antimatter asymmetry in the Universe. We explore the parameter space of such a two-Higgs-doublet-model and show that a first order electroweak phase transition strongly correlates with a significant uplifting of the Higgs vacuum w.r.t. its Standard Model value. We then obtain the spectrum and properties of the new scalars H0, A0 and H± that signal such a phase transition, showing that the decay A0 → H0Z at the LHC and a sizable deviation in the Higgs self-coupling λhhh from its SM value are sensitive indicators of a strongly first order electroweak phase transition in the 2HDM

Progression events defined by home-based assessment of motor function in multiple sclerosis: protocol of a prospective study

BACKGROUND: This study relates to emerging concepts of appropriate trial designs to evaluate effects of intervention on the accumulation of irreversible disability in multiple sclerosis (MS). Major starting points of our study are the known limitations of current definitions of disability progression by rater-based clinical assessment and the high relevance of gait and balance dysfunctions in MS. The study aims to explore a novel definition of disease progression using repeated instrumental assessment of relevant motor functions performed by patients in their home setting. METHODS: The study is a prospective single-center observational cohort study with the primary outcome acquired by participants themselves, a home-based assessment of motor functions based on an RGB-Depth (RGB-D) camera, a camera that provides both depth (D) and color (RGB) data. Participants are instructed to perform and record a set of simple motor tasks twice a day over a one-week period every 6 months. Assessments are complemented by a set of questionnaires. Annual research grade assessments are acquired at dedicated study visits and include clinical ratings as well as structural imaging (MRI and optical coherence tomography). In addition, clinical data from routine visits is provided semiannually by treating neurologists. The observation period is 24 months for the primary endpoint with an additional clinical assessment at 27 month to confirm progression defined by the Expanded Disability Status Scale (EDSS). Secondary analyses aim to explore the time course of changes in motor parameters and performance of the novel definition against different alternative definitions of progression in MS. The study was registered at Deutsches Register für Klinische Studien (DRKS00027042). DISCUSSION: The study design presented here investigates disease progression defined by marker-less home-based assessment of motor functions against 3-month confirmed disease progression (3 m-CDP) defined by the EDSS. The technical approach was chosen due to previous experience in lab-based settings. The observation time per participant of 24, respectively, 27 months is commonly conceived as the lower limit needed to study disability progression. Defining a valid digital motor outcome for disease progression in MS may help to reduce observation times in clinical trials and add confidence to the detection of progression events in MS