Development of proton-conducting membranes for hydrogen separation

The objective of this project is to develop dense ceramic membranes that can efficiently and economically separate hydrogen from gaseous mixtures (e.g., syngas, coal gas, etc.). Toward this end, materials with suitable electronic and protonic conductivities will be identified, and methods for fabricating thin, dense ceramic membranes from such materials will be developed. The chemical and mechanical stability of the membranes will be determined to estimate the expected lifetime of the membranes. Scoping-level evaluations will be performed to identify potential applications of proton membrane technology. Areas that will be evaluated include overall market scale, typical site operating scale, process integration opportunities and issues, and alternative-source economics. The literature on mixed electronic/protonic conductors was surveyed to identify suitable candidate materials. SrCe{sub 1{minus}x}M{sub x}O{sub 3{minus}{delta}} and BaCe{sub 1{minus}x}M{sub x}O{sub 3{minus}{delta}} (where M is a fixed-valent dopant such as Ca, Y, Yb, In, Nd, or Gd) were selected for further investigation on the basis of their reported total conductivities and proton transference numbers

Development of mixed-conducting ceramic membrane for hydrogen separation.

The Office of Fossil Energy of the US Department of Energy is formulating ''Vision 21,'' a program aimed at developing technologies for highly efficient power and coproduction plants that discharge almost no pollutants and close the carbon cycle. An integrated gasification combined cycle (IGCC) system is a likely modular component of a Vision 21 coproduction plant. IGCC technology is ideally suited for the coproduction of electricity and high-quality transportation fuel and/or a host of high-value chemicals. As part of the IGCC system, high-temperature membranes for separating hydrogen from coal gasification and other partial-oxidation-product streams are being considered. Thin and dense ceramic membranes fabricated from mixed protonic and electronic conductors provide a simple, efficient means for separating hydrogen from gas streams. Dense mixed-conducting ceramic membranes effect transport via ion- and electron-conducting mechanisms. Because these membranes have no interconnected porosity, selectively for hydrogen is nearly 100%. Hydrogen separation is achieved in a nongalvanic mode, i.e., without the need for electrodes and external power supply to drive the separation. BaCeO{sub 3}-based materials exhibit protonic conductivity that is significantly higher than its electronic conductivity. To enhance the electronic conductivity and increase hydrogen permeation, we have fabricated BaCeO{sub 3}-containing cermet membranes and used them in a nongalvanic mode to separate hydrogen from gas streams containing H{sub 2}, CO, CO{sub 2} and trace amounts of H{sub 2}S. Material selection, fabrication, performance as well as technical/technological challenges of the ceramic membranes for hydrogen separation are discussed in this talk

Coated-wire-in-tube processing of bismuth-2223 superconductors

A coated-wire-in-tube (CWIT) process greatly increases the silver/superconductor interface area in silver-sheathed Bi-2223 superconductors. When the performance of CWIT samples is compared to that of conventional monofilaments made with the same powder, critical current density increases significantly with increased silver/superconductor interface area. Benefits of increasing the silver/superconductor interface area are realized only when there is good continuity of the coated wires, and this requires a mechanical deformation sequence to preserve good continuity of the wires

Effect of lead content on phase evolution and microstructural development in Ag-clad Bi-2223 composite conductors

A two powder process was used to prepare silver-sheathed monofilamentary Bi{sub 1.8}Pb{sub x}Sr{sub 1.98}Ca{sub 1.97}Cu{sub 3.08}O{sub y} (Bi-2223) tapes with varying lead contents, x, from 0.2 to 0.5. The resulting tapes were subjected to thermomechanical processing and then characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive x-ray analysis (EDX). Layered phase texture was accessed using image analysis software on scanned SEM micrographs. Transport currents were measured at 77 K and zero field by the four-probe method. It was found that tapes with low lead content (X = 0.2 and 0.25) showed incomplete conversion to Bi-2223, had small grain size and poor c-axis texture. Tapes having higher lead content (x = 0.4 and 0.5) also showed incomplete conversion and the presence of lead-rich secondary phases. Tapes with lead content x = 0.3 and 0.35 showed complete conversion to Bi-2223, and had the least amount of secondary phases, the best c-axis texture, and the highest transport current (j{sub c}). The carbon content of the precursor powder also had a strong influence on secondary-phase chemistry

Hydrogen Separation Membranes - Annual Report for FY 2007.

The objective of this work is to develop dense ceramic membranes for separating hydrogen from other gaseous components in a nongalvanic mode, i.e., without using an external power supply or electrical circuitry

Hydrogen Production by Water Dissociation Using Ceramic Membranes. Annual Report for FY 2007

The objective of this project is to develop dense ceramic membranes that, without using an external power supply or circuitry, can produce hydrogen via coal/coal gas-assisted water dissociation. This project grew out of an effort to develop a dense ceramic membrane for separating hydrogen from gas mixtures such as those generated during coal gasification, methane partial oxidation, and water-gas shift reactions [1]. That effort led to the development of various cermet (i.e., ceramic/metal composite) membranes that enable hydrogen to be produced by two methods. In one method, a hydrogen transport membrane (HTM) selectively removes hydrogen from a gas mixture by transporting it through either a mixed protonic/electronic conductor or a hydrogen transport metal. In the other method, an oxygen transport membrane (OTM) generates hydrogen mixed with steam by removing oxygen that is generated through water splitting [1, 2]. This project focuses on the development of OTMs that efficiently produce hydrogen via the dissociation of water. Supercritical boilers offer very high-pressure steam that can be decomposed to provide pure hydrogen by means of OTMs. Oxygen resulting from the dissociation of steam can be used for coal gasification, enriched combustion, or synthesis gas production. Hydrogen and sequestration-ready CO{sub 2} can be produced from coal and steam by using the membrane being developed in this project. Although hydrogen can also be generated by high-temperature steam electrolysis, producing hydrogen by water splitting with a mixed-conducting membrane requires no electric power or electrical circuitry

Hydrogen separation membranes annual report for FY 2010.

The objective of this work is to develop dense ceramic membranes for separating hydrogen from other gaseous components in a nongalvanic mode, i.e., without using an external power supply or electrical circuitry. The goal of this project is to develop dense hydrogen transport membranes (HTMs) that nongalvanically (i.e., without electrodes or external power supply) separate hydrogen from gas mixtures at commercially significant fluxes under industrially relevant operating conditions. These membranes will be used to separate hydrogen from gas mixtures such as the product streams from coal gasification, methane partial oxidation, and water-gas shift reactions. Potential ancillary uses of HTMs include dehydrogenation and olefin production, as well as hydrogen recovery in petroleum refineries and ammonia synthesis plants, the largest current users of deliberately produced hydrogen. This report describes the results from the development and testing of HTM materials during FY 2010

Hydrogen production by water dissociation using ceramic membranes - annual report for FY 2010.

The objective of this project is to develop dense ceramic membranes that can produce hydrogen via coal/coal gas-assisted water dissociation without using an external power supply or circuitry. This project grew from an effort to develop a dense ceramic membrane for separating hydrogen from gas mixtures such as those generated during coal gasification, methane partial oxidation, and water-gas shift reactions. That effort led to the development of various cermet (i.e., ceramic/metal composite) membranes that enable hydrogen production by two methods. In one method, a hydrogen transport membrane (HTM) selectively removes hydrogen from a gas mixture by transporting it through either a mixed protonic/electronic conductor or a hydrogen transport metal. In the other method, an oxygen transport membrane (OTM) generates hydrogen mixed with steam by removing oxygen that is generated through water splitting. This project focuses on the development of OTMs that efficiently produce hydrogen via the dissociation of water. Supercritical boilers offer very high-pressure steam that can be decomposed to provide pure hydrogen using OTMs. Oxygen resulting from the dissociation of steam can be used for coal gasification, enriched combustion, or synthesis gas production. Hydrogen and sequestration-ready CO{sub 2} can be produced from coal and steam by using the membrane being developed in this project. Although hydrogen can also be generated by high-temperature steam electrolysis, producing hydrogen by water splitting with a mixed-conducting membrane requires no electric power or electrical circuitry

Motor Preparatory Activity in Posterior Parietal Cortex is Modulated by Subjective Absolute Value

For optimal response selection, the consequences associated with behavioral success or failure must be appraised. To determine how monetary consequences influence the neural representations of motor preparation, human brain activity was scanned with fMRI while subjects performed a complex spatial visuomotor task. At the beginning of each trial, reward context cues indicated the potential gain and loss imposed for correct or incorrect trial completion. FMRI-activity in canonical reward structures reflected the expected value related to the context. In contrast, motor preparatory activity in posterior parietal and premotor cortex peaked in high “absolute value” (high gain or loss) conditions: being highest for large gains in subjects who believed they performed well while being highest for large losses in those who believed they performed poorly. These results suggest that the neural activity preceding goal-directed actions incorporates the absolute value of that action, predicated upon subjective, rather than objective, estimates of one's performance