1,029 research outputs found
Monte Carlo Quasi-Heatbath by approximate inversion
When sampling the distribution P(phi) ~ exp(-|A phi|^2), a global heatbath
normally proceeds by solving the linear system A phi = eta, where eta is a
normal Gaussian vector, exactly. This paper shows how to preserve the
distribution P(phi) while solving the linear system with arbitrarily low
accuracy. Generalizations are presented.Comment: 10 pages, 1 figure; typos corrected, reference added; version to
appear in Phys. Rev.
Assessing the damming effects on runoff using a multiple linear regression model: A case study of the Manwan Dam on the Lancang River
AbstractThe Lancang River in Yunnan Province, with a length of 1170km and a 1780-m drop from northwest to southeast, is the most controversial river in southwest China because 14 cascade hydropower stations have been planned on the main waterway. The Manwan Dam, the first of the 14 dams, began operating in 1993, and the associated downstream runoff may have been affected by its construction. To assess this impact, we first investigated the relationships between monthly runoff observed from the Gajiu station and meteorological data obtained from four meteorological gauging stations with a time-lag of 0-3 months over the pre-dam period (1957-2000). Second, we established and validated a multiple linear regression equation employing monthly meteorological and hydrological data during the pre-dam period. Finally, we simulated the monthly runoff after dam construction (1993-2000) using the established equations and assessed the impact of dam construction on runoff by comparing the observed actual monthly runoff with the simulated monthly runoff. Our results suggested a very high hydro-meteorological correlation for the pre-dam period, which opened up the possibility of runoff forecasting. Further, the multiple linear regression equation displayed good simulation performance as coefficient of determination (R2) and the Nash-Suttcliffe coefficient (NS) reached 0.84 and 0.82 respectively. By comparing the observed and the predicted monthly runoff, we found that construction of the Manwan Dam caused a visible disturbance on monthly runoff that, with the disturbance value, displayed a multi-peak fluctuation of up-down variation in the annual hydrologic regime circl
Long-distant contribution and radiative decays to light vector meson
The discrepancy between the PQCD calculation and the CLEO data for
() stimulates our interest in
exploring extra mechanism of decay. In this work, we apply an
important non-perturbative QCD effect, i.e., hadronic loop mechanism, to study
radiative decay. Our numerical result shows that the
theoretical results including the hadronic loop contribution and the PQCD
calculation of are consistent with the corresponding
CLEO data of . We expect further experimental
measurement of at BES-III, which will be helpful to
test the hadronic loop effect on decay.Comment: 7 pages, 2 figures. Accepted for publication in Eur. Phys. J.
Impacts of environmental factors and human disturbance on composition of roadside vegetation in Xishuangbanna National Nature Reserve of Southwest China
AbstractVegetation-disturbance-environment relationships in Xishuangbanna Nature Reserve (XNR) was examined using multivariate analysis to understand the impacts of environmental factors and human disturbance on vegetation along the highway corridor. The results show that native forests were the best habitat for protected/endangered species and native species. The exotic plants Eupatorium odoratum and Eupatorium adenophora were found primarily in secondary forests and their presence was positively associated with altitude and soil potassium concentrations. The distribution of two protected plants, Phoebe nanmu and Pometia tomentosa, was negatively associated with road disturbance. Understanding the complex effects of environmental factors and human disturbance is key for developing conservation and restoration strategies for roadside plant ecosystems
Future Directions in Parity Violation: From Quarks to the Cosmos
I discuss the prospects for future studies of parity-violating (PV)
interactions at low energies and the insights they might provide about open
questions in the Standard Model as well as physics that lies beyond it. I cover
four types of parity-violating observables: PV electron scattering; PV hadronic
interactions; PV correlations in weak decays; and searches for the permanent
electric dipole moments of quantum systems.Comment: Talk given at PAVI 06 workshop on parity-violating interactions,
Milos, Greece (May, 2006); 10 page
Baryon Tri-local Interpolating Fields
We systematically investigate tri-local (non-local) three-quark baryon fields
with U_L(2)*U_R(2) chiral symmetry, according to their Lorentz and isospin
(flavor) group representations. We note that they can also be called as
"nucleon wave functions" due to this full non-locality. We study their chiral
transformation properties and find all the possible chiral multiplets
consisting J=1/2 and J=3/2 baryon fields. We find that the axial coupling
constant |g_A| = 5/3 is only for nucleon fields belonging to the chiral
representation (1/2,1)+(1,1/2) which contains both nucleon fields and Delta
fields. Moreover, all the nucleon fields belonging to this representation have
|g_A| = 5/3.Comment: 8 pages, 3 tables, accepted by EPJ
A reassessment of Kelmayisaurus petrolicus, a large theropod dinosaur from the Early Cretaceous of China
The Early Cretaceous fossil record of large−bodied theropods from Asia is poor, hindering comparison of Asian predatory dinosaur faunas with those from other continents. One of the few large Asian theropod specimens from this interval is a partial skull (maxilla and dentary) from the Lianmugin Formation (?Valanginian–Albian), the holotype of Kelmayisaurus petrolicus. Most authors have either considered this specimen as an indeterminate basal tetanuran or a nomen dubium. Weredescribe K. petrolicus and note that it possesses a single autapomorphy (a deep accessory groove on the lateral surface of the anterior dentary), as well as a unique combination of characters that differentiates it from other theropods, affirming its validity. A phylogenetic analysis recovers K. petrolicus as a basal carcharodontosaurid, which is supported by various features: very deep interdental plates (a carcharodontosaurid synapomorphy), fused interdental plates (present in carchardontosaurids and a limited number of other theropods), and the absence of diagnostic features of other clades of large−bodied theropods such as abelisaurids, megalosauroids, and coelurosaurs. As such, Kelmayisaurus is the second known carcharodontosaurid from Asia, and further evidence that this clade represented a global radiation of large−bodied predators during the Early–mid Cretaceous
Sudden switch of generalized Lieb-Robinson velocity in a transverse field Ising spin chain
The Lieb-Robinson theorem states that the speed at which the correlations
between two distant nodes in a spin network can be built through local
interactions has an upper bound, which is called the Lieb-Robinson velocity.
Our central aim is to demonstrate how to observe the Lieb-Robinson velocity in
an Ising spin chain with a strong transverse field. We adopt and compare four
correlation measures for characterizing different types of correlations, which
include correlation function, mutual information, quantum discord, and
entanglement of formation. We prove that one of correlation functions shows a
special behavior depending on the parity of the spin number. All the
information-theoretical correlation measures demonstrate the existence of the
Lieb-Robinson velocity. In particular, we find that there is a sudden switch of
the Lieb-Robinson speed with the increasing of the number of spin
Data acquisition process for an intelligent decision support in gynecology and obstetrics emergency triage
Manchester Triage System is a reliable system of triage in the emergency department of a hospital. This system when applied to a specific patients’ condition such the pregnancy has several limitations. To overcome those limitations an alternative triage IDSS was developed in the MJD. In this approach the knowledge was obtained directly from the doctors’ empirical and scientific experience to make the first version of decision models. Due to the particular gynecological and/or obstetrics requests other characteristics had been developed, namely a system that can increase patient safety for women in need of immediate care and help low-risk women avoid high-risk care, maximizing the use of resources. This paper presents the arrival flowchart, the associated decisions and the knowledge acquisition cycle. Results showed that this new approach enhances the efficiency and the safety through the appropriate use of resources and by assisting the right patient in the right place.The work of Filipe Portela was supported by the grant SFRH/BD/70156/2010 from FC
Laser polishing of 3D printed mesoscale components
Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm Sa) was achieved at the optimised settings (fluence of 9 J/cm2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps and irregularities that were prevalent on the as-received stainless steel samples. The optimised laser polishing technology was consequently implemented for serial finishing of structured 3D printed mesoscale SS316L components. This led to substantial reductions in areal Sa and St parameters by 75% (0.489–0.126 μm) and 90% (17.71–1.21 μm) respectively, without compromising the geometrical accuracy of the native 3D printed samples
- …