Simple methods for identification of Radiative properties of highly-porous ceria ceramics in the range of semi-transparency

Purpose: The aim of this paper is to present advanced experimental-numerical methods for identification of spectral absorption and scattering properties of highly porous ceria ceramics in the range of semi-transparency at room and elevated temperatures. Design/methodology/approach: At room temperature, a period of quasi-steady oscillations of the sample surface temperature generated in response to recurrent laser heating at fixed values of the maximum and minimum temperature of the irradiated surface is measured along with the normal-hemispherical reflectance. Radiative properties are then identified using a combined heat transfer model. At elevated temperatures, an analytical solution proposed in an earlier study for zirconia ceramics is used to retrieve spectral absorption coefficient of ceria ceramics from the measured normal emittance. Findings and Originality/value: This method can be used to obtain small absorption coefficient of ceria ceramics at room temperature. The required measurements of both the normal-hemispherical reflectance and the period of quasi-steady oscillations of the irradiated surface temperature of the ceramics sample between fixed values of the maximum and minimum temperatures can be readily conducted using thermal laboratory equipment. Another method has been suggested for identification of the spectral absorption coefficient of ceria ceramics at elevated temperatures. This method is based on a relation between the measured normal emittance of an isothermal sample and the absorption coefficientThe financial support by the Russian Foundation for Basic Research, grant no. 16-08-00157-a (L.A. Dombrovsky), and by the Australian Research Council, grant no. FT140101213 (W. Lipiński), is gratefully acknowledged

Two-step method for radiative transfer calculations in a developing pool fire at the initial stage of its suppression by a water spray

A procedure based on two-step method is suggested to simplify time-consuming spectral radiative transfer calculations in open flames containing scattering particles. At the first step of the problem solution, the P1 approximation is used to calculate the divergence of radiative flux, and it is sufficient to determine the flame parameters. The second step of solution is necessary to obtain the radiation field outside the flame, and this can be made independently using the ray-tracing procedure and the transport source function determined at the first step. Such a splitting of the complete problem results in much simpler algorithm than those used traditionally. It has been proved in previous papers that the combined two-step method is sufficiently accurate in diverse engineering applications. At the same time, the computational time decreases in about two orders of magnitude as compared with direct methods. An axisymmetric pool fire at the initial stage of fire suppression by a water spray is considered as the case problem. It is shown that evaporating small water droplets characterised by a strong scattering of infrared radiation are mainly located in regions near the upper front of the flame and one can observe the scattered radiation. This effect can be used in probe experiments for partial validation of transient Computational Fluid Dynamics (CFD) simulations

Absorption of Short-Pulsed Laser Radiation in Superficial Human Tissues: Transient Vs Quasi-Steady Radiative Transfer

Transient radiative transfer effects are pertinent to thermal treatment of superficial cancer via short-pulsed laser irradiation. The transient effects become particularly important due to relatively strong scattering and long attenuation path of radiation in human tissues in the therapeutic window until the complete absorption. Our analysis is based on transport approximation for scattering phase function and the Monte Carlo method for radiative transfer. One-dimensional radiative transfer problem is considered, which was proved to be applicable for simulation of heat transfer and thermal destruction of tumors in superficial human tissues in the case of indirect heating strategy. A series of Monte Carlo calculations enables us to find the threshold of the steady-state approach applicability. In the biomedical problem under consideration, the steady-state solution for absorbed radiation power is sufficiently accurate at duration of laser pulse more than about 10 ps. The calculations for human tissues with embedded gold nanoshells, which are used to increase the local volumetric absorption of the radiation, showed that overheating of the nanoshells with respect to the ambient biological tissue is strongly dependent of the laser pulse duration. This effect is quantified for short pulses by solving the unsteady radiative transfer problem

Self-assembled levitating clusters of water droplets: pattern-formation and stability

Water forms ordered hexagonally symmetric structures (snow crystals) in its solid state, however not as liquid. Typically, mists and clouds are composed of randomly moving small droplets lacking any ordered structure. Self-organized hexagonally patterned microdroplet clusters over locally heated water surfaces have been recently observed. However, many aspects of the phenomenon are far from being well understood including what determines droplets size, arrangement, and the distance between them. Here we show that the Voronoi entropy of the cluster tends to decrease indicating to their selforganization, while coupling of thermal effects and mechanical forces controls the stability of the clusters. We explain the balance of the long-range attraction and repulsion forces which stabilizes the cluster patterns and established the range of parameters, for which the clusters are stable. The cluster is a dissipative structure similar to self-organized Rayleigh–Bénard convective cells. Microdroplet formation plays a role in a variety effects from mist and clouds to aerosols. We anticipate that the discovery of the droplet cluster phenomenon and its explanation will provide new insights on the fundamental physical and chemical processes such as microdroplet role in reaction catalysis in nature as well as new tools for aerosol analysis and microfluidic applications

An infrared scattering by evaporating droplets at the initial stage of a pool fire suppression by water sprays

The computational analysis of downward motion and evaporation of water droplets used to suppress a typical transient pool fire shows local regions of a high volume fraction of relatively small droplets. These droplets are comparable in size with the infrared wavelength in the range of intense flame radiation. The estimated scattering of the radiation by these droplets is considerable throughout the entire spectrum except for a narrow region in the vicinity of the main absorption peak of water where the anomalous refraction takes place. The calculations of infrared radiation field in the model pool fire indicate the strong effect of scattering which can be observed experimentally to validate the fire computational model

A comparative analysis of shielding of thermal radiation of fires using mist curtains containing droplets of pure water or sea water

The paper is focused on comparative computational modelling of the attenuation of fire radiation by water mists of pure water or sea water. The use of sea water in fire protection could be a more convenient and practical choice in coastal areas, on offshore installations or transported ships. The spectral absorption and scattering properties of both water droplets and salt particles formed by evaporation of sea water droplets are considered. A combined heat transfer problem is based on a combination of the spectral radiative transfer in a mist curtain, the kinetics of water evaporation, and convective heat transfer along the curtain. The developed computational model is used to analyze the radiative heating and evaporation of droplets of pure water and more complex multi-phase processes in droplets of sea water at all stages of the process. The numerical results for the case problem indicate sufficiently good shielding quality of a sea-water mist curtain. The suggested approach is expected to be useful for important engineering applications in fire protection