Mitigating energy system vulnerability by implementing a microgrid with a distributed management algorithm

This work presents a management strategy for microgrid (MG) operation. Photovoltaic (PV) and wind generators, as well as storage systems and conventional units, are distributed over a wide geographical area, forming a distributed energy system, which is coordinated to face any contingency of the utility company by means of its isolated operation. The management strategy divides the system into three main layers: renewable generation, storage devices, and conventional units. Interactions between devices of the same layer are determined by solving an economic dispatch problem (EDP) in a distributed manner using a consensus algorithm (CA), and interactions between layers are determined by means of a load following strategy. In this way, the complex behaviour of PV and wind generation, the battery storage system, and conventional units has been effectively combined with CA to solve EDP in a distributed manner. MG performance and its vulnerability are deeply analysed by means of an illustrative case study. From the observed results, vulnerability under extreme conditions could be reduced up to approximately 30% by coupling distributed renewable generation and storage capacity with an energy system based on conventional generation

Offshore wind installation: Analysing the evidence behind improvements in installation time

The most important single event of the last years in wind energy technology is the reduction in the cost of producing wind electricity offshore, a reduction that can reach 75%, depending on the system boundary considered, for installations commissioned by 2024. Surprisingly, there is very little scientific literature showing how this reduction is being achieved. The objective of this paper is to analyse the evidence behind cost reduction in one of the most significant cost elements of offshore wind farms, the installation of foundations and turbines. This cost is directly dependent on the daily rates of the installation vessels and on the days it takes to install those wind farm elements. Therefore, we collected installation data from 87 wind farms installed from 2000 to 2017, to establish the exact time for installation in each. The results show that advances have reached 70% reduction in installation times throughout the period for the whole set, turbine plus foundation. Most of these improvements (and the corresponding impact in reducing costs) relate to the larger size of turbines installed nowadays. There is, therefore, not any leap forward in the installation process, but only incremental improvements applied to turbines that are now four times as large as in 2000

Obesity dependent metabolic signatures associated with nonalcoholic fatty liver disease progression

Our understanding of the mechanisms by which nonalcoholic fatty liver disease (NAFLD) progresses from simple steatosis to steatohepatitis (NASH) is still very limited. Despite the growing number of studies linking the disease with altered serum metabolite levels, an obstacle to the development of metabolome-based NAFLD predictors has been the lack of large cohort data from biopsy-proven patients matched for key metabolic features such as obesity. We studied 467 biopsied individuals with normal liver histology (n=90) or diagnosed with NAFLD (steatosis, n=246; NASH, n=131), randomly divided into estimation (80% of all patients) and validation (20% of all patients) groups. Qualitative determinations of 540 serum metabolite variables were performed using ultra-performance liquid chromatography coupled to mass spectrometry (UPLCMS). The metabolic profile was dependent on patient body-mass index (BMI), suggesting that the NAFLD pathogenesis mechanism may be quite different depending on an individual’s level of obesity. A BMI-stratified multivariate model based on the NAFLD serum metabolic profile was used to separate patients with and without NASH. The area under the receiver operating characteristic curve was 0.87 in the estimation and 0.85 in the validation group. The cutoff (0.54) corresponding to maximum average diagnostic accuracy (0.82) predicted NASH with a sensitivity of 0.71 and a specificity of 0.92 (negative/positive predictive values = 0.82/0.84). The present data, indicating that a BMI-dependent serum metabolic profile may be able to reliably distinguish NASH from steatosis patients, have significant implications for the development of NASH biomarkers and potential novel targets for therapeutic intervention

Análisis de los minerales de la arcilla y sus procesos genéticos en las formaciones arcillosas de la Cuenca del Tajo.

Se han estudiado seis sondeos, realizados en la cuenca neógena del Tajo, con el fin de conocer los procesos genéticos de los materiales arcillosos de la cuenca. Estos sondeos cortan facies correspondientes a distintos ambientes deposicionales. La evolución observada puede relacionarse con dos etapas distintas de sedimentación. La primera corresponde a la sedimentación de la Unidad de Yesos; la asociación de minerales de arcilla en esta unidad está constituida principalmente por illita, menores contenidos de esmectita, interestratificados I/Sm, Cl/Sm, Glauconita/Sm, palygorskita y clorita. El origen de esta asociación es en parte detrítica y en parte neoformada; los aportes detríticos corresponden a illita y esmectita, mientras que los minerales neoformados son principalmente illita e interestratificados, clorita y palygorskita. Esta etapa se caracteriza por la existencia de procesos de illitización. En la segunda etapa de sedimentación (Unidad de Arcillas Verdes), se observa un incremento de los aportes detríticos y una evolución hacia condiciones de menor salinidad. El ambiente de formación de esta unidad se encuentra enriquecido en magnesio y los minerales de la arcilla más característicos de las facies que componen dicha unidad son las esmectitas magnésicas (saponita y estevensita) y, en menor proporción, los interestratificados Cl/Sm. Esta asociación mineralógica se origina por la reacción entre las partículas detríticas arcillosas y los cationes del medio

A methodological proposal and tool support for the HL7 standards compliance in the development of health information systems

Health information systems are increasingly complex, and their development is presented as a challenge for software development companies offering quality, maintainable and interoperable products. HL7 (Health level 7) International, an international non-profit organization, defines and maintains standards related to health information systems. However, the modelling languages proposed by HL7 are far removed from standard languages and widely known by software engineers. In these lines, NDT is a software development methodology that has a support tool called NDT-Suite and is based, on the one hand, on the paradigm of model-driven engineering and, on the other hand, in UML that is a widely recognized standard language. This paper proposes an extension of the NDT methodology called MoDHE (Model Driven Health Engineering) to offer software engineers a methodology capable of modelling health information systems conforming to HL7 using UML domain models

Experimental estimation of the residual fatigue life of in-service wind turbine bolts

This study presents an experimental methodology aimed at estimating the residual fatigue life of in-service wind turbine bolts. The main objective is to assess the residual life of the bolts to plan their replacement and to avoid unexpected breakages of wind turbine blade connections. To develop the methodology, M16 bolts of quality 10.9 with controlled predamage were used, simulating in-service operating conditions. The fatigue tests were carried out taking care to place the nut at the point on the bolt that produces the highest damage at the same point where the predamage was performed. In addition, the influence of a possible angular positioning error on the residual fatigue life has been investigated. The residual fatigue life is estimated from the difference in fatigue life of new bolt tests and the fatigue life of predamaged bolt tests, simulating service conditions. Special care has been taken to guarantee that the most damaged zone of the bolt in service is also in the position that produces the highest damage during tests. An experimental procedure for determining the fatigue life of a new bolt from tests conducted on a bolt under the same operating conditions was developed. The developed methodology has been applied to M20 bolts belonging to real turbines in service

A Framework to Evaluate Software Developer’s Productivity The VALORTIA Project

Currently, there is a lack in companies developing software in relation to assessing their staff’s productivity before executing software projects, with the aim of improving effectiveness and efficiency. QuEF (Quality Evaluation Framework) is a framework that allows defining quality management tasks based on a model. The main purpose of this framework is twofold: improve an entity’s continuous quality, and given a context, decide between a set of entity’s instances on the most appropriate one. Thus, the aim of this paper is to make this framework available to evaluate productivity of professionals along software development and select the most appropriate experts to implement the suggested project. For this goal, Valortia platform, capable of carrying out this task by following the QuEF framework guidelines, is designed. Valortia is a platform to certify users' knowledge on a specific area and centralize all certification management in its model by means of providing protocols and methods for a suitable management, improving efficiency and effectiveness, reducing cost and ensuring continuous quality.Ministerio de Ciencia e Innovación TIN2013-46928-C3-3-

Aplicación del análisis de imagen a la caracterización de la marmatita l.t. (Marmato, Colombia)

El presente trabajo investiga la diferencia existente entre el contenido de Fe teórico definido en marmatita (esfalerita con 10% a 26% Fe) y el contenido real (9% Fe) determinado por Microsonda Electrónica (MS) en muestras de este mineral procedentes del locus typicus. Se trata de determinar si el mineral estaba correctamente definido en origen, combinando los estudios de MS y el Análisis Digital de Imagen (ADI) sobre probetas pulidas de la Mina de Marmato, Colombia. Se demuestra que las inclusiones microscópicas de otras fases portadoras de Fe (pirrotita, calcopirita) en esfalerita aportan una cantidad de Fe que puede ser significativa (~1.5 % en las muestras analizadas). Dichas fases no podían separarse cuando se definió la marmatita (1929) y, por tanto, el Fe de las mismas se habría atribuido a la esfalerita

Smoothed particle hydrodynamics on GPU computing

Smoothed Particle Hydrodynamics (SPH) is a powerful technique used to simulate complex free-surface flows. However one of the main drawbacks of this method is the expensive computational runtime and the large number of particles needed when 3D simulations are performed. High Performance Computing (HPC) therefore becomes essential to accelerate these codes and perform simulations. In this study, parallelization using Graphics Processing Units (GPU) is applied to the SPHysics code (www.sphysics.org) dedicated to free-surface flows with SPH. Simulations involving several million particles on a single GPU exhibit speedups of up to two orders of magnitude over the same calculations using CPU codes, while parallelization using MPI for multi-GPU leads to further acceleration. This cheap technology allows studying real-life engineering problems at reasonable computational runtimes