Simple assembly line balancing problem under task deterioration

This paper introduces the effect of task deterioration in simple assembly line balancing problem. In many realistic assembly lines, a deterioration task is considered when a task is started earlier than the assigned time since the station time is constant and the earliness of the task does not reduce the cycle time. This phenomenon is known as deteriorating tasks. Therefore, we seek an optimal assignment and schedule of tasks in workstations, in order to minimize the number of stations for a given cycle time, which is known as SALBP-1. For this purpose, a mathematical model is proposed. Since the pure SALBP-1 is proved to be NP-hard and considering task deterioration complicates problem further, we propose a genetic algorithm for solving such problem. Several well-known test problems are solved to study the performance of the proposed approach

Numerical Simulation of Like and Unlike Impinging Jets

[EN] In the present study, using the open source OpenFOAM code, a numerical simulation is performed taking the adaptive mesh refinement (AMR) technique during solution. Formation of liquid sheet after the impact of two identical cylindrical jets at various conditions is studied. Since the flow pattern depends upon the Reynolds and Weber numbers, numerical tests are conducted at a variety of flow velocities and Reynolds numbers to demonstrate the effect of these parameters on the sheet formation. It is then concluded that at various conditions, different instabilities occur in the flow; hence, different sheet formations a flow patterns happen. In this study, impact of two dissimilar cylindrical fluid jets is successfully simulated for the first time in literature. Actually, water and oil jets are taken into account and their impact behavior is studied. In the presence of the surrounding air, an unstable sheet will form after impact due to the high injection speed of the jets. As depicted in the results, since the inertia and other physical characteristics of the two fluids are dissimilar, different phases are more intensely diffused.Dolatkhahi, H.; Oliaee, G.; Kebriaee, A. (2017). Numerical Simulation of Like and Unlike Impinging Jets. En Ilass Europe. 28th european conference on Liquid Atomization and Spray Systems. Editorial Universitat Politècnica de València. 265-272. https://doi.org/10.4995/ILASS2017.2017.4865OCS26527

Ethnobotanical study of medicinal plants used in Arjan – Parishan protected area in Fars Province of Iran

Objective: Today, medicinal plants are widely used in remedies for several ailments and improvement of human health because of their pharmaceutical properties. This study aimed to document important useful medicinal plants and their medicinal characteristics for treatment of human ailments in the Arjan _ Parishan protected area in Fars province of Iran during 2010-2012. Materials and Methods: Data were obtained using direct interviews with 80 informants particularly those who were more familiar with the herbs and their medicinal properties. Collected plants were recognized and families, genera, and species determined using indispensable references. In this paper, scientific name, local name, parts used, and ways of application and ailments treated using traditional medicinal plant species have been provided. Results: We documented 85 plant species belonging to 39 families and 78 genera used for treating ailments. Among which, Asteraceae with 13 species was the most frequently used family and fruits and leaves were the favored parts for local users. Our results indicated that in this area, the highest compliance in the use of plants in treating ailments were related to the intestinal digestive system (40.8%). Conclusion: The present study is the first contribution to the ethnobotany of this region. Our results showed that some plants are used for medicinal purposes in this region, either for the same or for different purposes. Generally, the results of the present investigation can be used as a basis for selecting useful medicinal plants and also help to preserve precious information that may otherwise be lost to future generations

Plant Spacing and Cultivar Affects Yield Components, Qualitative Traits and Early Ripening of Tomato (<i>Lycopersicon esculentum</i>)

Two-year field trial was set up on sandy clay soil in the Jiroft and Kahnouj Agricultural Research Center with the objective to determine the effect of plant spacing and different cultivars on the yield and qualitative characteristics of tomato (<i>Lycopersicon esculentum</i>). This experiment was performed as split plot based on complete randomized block design with 3 replications. The main plots were in – row\ud spacing in 4 levels include 0.3, 0.4, 0.5 and 0.6 m and the subplots were cultivars naming ‘Shef ’, ‘Peto Early CH’ and ‘FDT 202’. The results showed that, fruit length to diameter ratio, total acidity, fruit number per plant, mean fruit weight, yield per plant, total yield and first harvest to total harvests ratio were significantly affected by plant spacing. In addition, cultivars showed significant effect on all traits evaluated (p<0.01). In this experiment, fruit length to diameter ratio and total acidity increased as plant spacing increased, however it\ud had no effect on total soluble solids. In this study, total fruit yield is being increased while the yield per plant, number of fruit per plant and fruit weight is being reduced by increased number of plants per unit area. Although among tomato cultivar, ‘Peto Early CH’ had a higher yield over other cultivars, but cultivar ‘Shef ’ showed higher yield in the first harvest. Generally it seems according to the results collected that plant spacing 0.3 m and ‘Shef ’ cultivar owing to better adaptation and higher commercial yield for production in Jiroft\ud city is suggested

Shading Impact on Qualitative Characteristics and Chlorophyll Content of Cut Rose (Rosa hybrida cv. Avalanche)

Light intensity is considered a limiting factor in greenhouse rose production. The main aim of this experiment was to evaluate the effect of shading treatments (0, 25, 50, and 65% shading) on quality and chlorophyll content of cut rose (Rosa hybrida cv. Avalanche), under greenhouse conditions. The experiment was planned in randomized completely block design with four replications. All shoots were bent downwards from above the second bud after removing the young flower bud. Shading significantly affected on bud sprouting, flowering stem fresh and dry weight and flowering stem diameter, so that earliest bud sprouting, highest flowering stem, fresh and dry weight and flowering stem diameter were observed in no shading treatment. However, shading had no significant effect on flowering stem length and leaf area, but specific leaf area increased with shading percentage increment at 65% shade. Results of total chlorophyll content as well as chlorophyll a and b showed a decrement with increasing of shading percentage. In general, shading could be a cause of low-quality in cut roses; therefore greenhouse roses growers should consider greenhouse architecture to maximize light deep penetration. Keyword

Ethnopharmacology of Medicinal Plants in Genaveh Port

Background: Ethnopharmacology has been seen as a multidisciplinatary approach for novel drug discovery by providing valuable data about medicinal plants in different cultures. The aim of this ethnopharmacological study was to identify medicinal plants of the Genaveh port in the North of Persian Gulf. Material and Methods: The medical uses of medicinal plants were gathered from 30 local informants by face to face interview. The relative frequency of citation (FRC) and cultural importance (CI) indices were calculated. Results: A total of 93 medicinal plants belonging to 55 families were identified. Plantago psyllium, Teucrium polium, Peganum harmala, Descuraninia sophia, Cichorium intybus, Achillea erophora DC, Matricarria charmomilla and Citrolus colocynthis had the highest cultural importance indices. Plantago psyllium, Descuraninia sophia and Zataria multiflora had the highest FRC indices. The highest medical uses were for gastrointestinal diseases, gynocological diseases, respiratory disorders, infectious diseases, nature of cool and metabolic disorders, respectively. In addition to the use of these plants to treat diseases as in Iran&rsquo;s traditional medicine, people in the Genaveh port particularly use Plantago psyllium for drainage of infective boils and abscesses, cough, skin diseases, Teucrium polium for diabetes mellitus, wound washing and sterilizing, Peganum harmala for uterus infections and abdominal cramps, Descuraninia sophia for heart diseases and heatstroke, Cichorium intybus for heatstroke and liver diseases, Achillea eriophora DC for reflex, diabetes mellitus and wound healing, Matricarria charmomilla for seizure and dysmenorrhea, Citrolus colocynthis for hemorrhoid, diabetes mellitus and rheumatism and Zataria multiflora for sedation, abdominal pain and respiratory diseases. Conclusion: There is a vast variety of medicinal plants in Genaveh port. Although most of therapeutic applications of these plants in the Genaveh port are the same as Iran&rsquo;s traditional medicine, but the people of this region use some of these plants for some diseases which are unique for this area. Thus, investigation about these plants should be initiated to discover novel drugs for clinical applications

Study of Herbal Medicine in Zirrah (Touz) /Dashtestan/Bushehr province

Background: Ethnopharmacology has been seen as a multidisciplinary approach for novel drug discovery by providing valuable data about medicinal plants in different cultures. The aim of this ethnopharmacological study was to identify medicinal plants of the Zirrah (Touz)/Dashtestan/Bushehr province in the North of Persian Gulf. Material and Methods: The medical uses of medicinal plants were gathered from 23 local informants by face to face interviews. The relative frequency of citation (FRC) and cultural importance (CI) indices were calculated. Results: A total of 131 medicinal plants belonging to 62 families were identified. Malva sylvestris, Zataria multiflora, Terminalia chebula, Cuminum cyminum, Foenicum vulgare, Olivera decumbens, Echium amoenum, Teucriuma polium, Cannabis sativa and Papaver somniferum had the highest cultural importance indices. Ducrosia anethifolia Bioss, Nigella sativa, Capparis spinosa and Urtica dioica had the highest FRC indices. The highest medical uses were for gastrointestinal diseases, gynecological diseases and dermatological uses, infectious diseases, nature of cool and metabolic disorders, respectively. Conclusion: There is a vast variety of medicinal plants in Zirrah (Touz)/Dashtestan/Bushehr province. Although most of therapeutic applications of these plants in the Zirrah (Touz)/Dashtestan/Bushehr province are the same as Iran&rsquo;s traditional medicine, but the people of this region use some of these plants for some diseases which are unique for this area. Thus, investigation about these plants should be initiated to discover novel drugs for clinical applications