Structural synergy of NanoAl2O3/NanoAl composites with high thermomechanical properties and ductility

Achieving a combination of high strength and ductility in metal-based composites is still a difficult task, and it is especially challenging in a wide temperature range. Here, nanoAl2O3/nanoAl composites with high tensile and compressive strength and excellent ductility at 25 and 500 °C were obtained using Al and Al2O3 nanopowders via a combination of high-energy ball milling (HEBM) and spark plasma sintering (SPS). Being about three times lighter than conventional high-strength steel (with a density of 2.7 g/cm3 vs. that of 7.8 g/cm3 for steel), the nanoAl2O3/nanoAl materials demonstrated tensile strength and elongation before failure comparable with those of steel. The nanoAl2O3/nanoAl composites were strengthened with two types of Al2O3 NPs, in situ formed, and introduced into the powder mixture. The resulting materials had a bimodal microstructure consisting of Al with micron and submicron grains surrounded by an Al/Al2O3 framework whose structural components were all in the size range of 20–50 nm. Among the studied compositions (0, 1, 2, 3, 4, 5, 10, and 20 wt.% of Al2O3), the Al-3%Al2O3 material showed the best thermomechanical properties, such as a tensile strength of 512 MPa and 280 MPa and a compressive strength of 489 MPa and 344 MPa at 25 and 500 °C, respectively, with an elongation to failure of 15–18%. These results show the promise of nanoAl2O3/nanoAl composites for use as small items in the automotive and aviation industries.</p

Antibacterial, UV-Protective, Hydrophobic, Washable, and Heat-Resistant BN-Based Nanoparticle-Coated Textile Fabrics: Experimental and Theoretical Insight

The use of nanoparticles (NPs) to modify the surface of cotton fabric is a promising approach to endowing the material with a set of desirable characteristics that can significantly expand the functionality, wear comfort, and service life of textile products. Herein, two approaches to modifying the surface of hexagonal boron nitride (h-BN) NPs with a hollow core and a smooth surface by treatment with maleic anhydride (MA) and diethylene triamine (DETA) were studied. The DETA and MA absorption on the surface of h-BN and the interaction of surface-modified h-NPs with cellulose as the main component of cotton were modeled using density functional theory with the extended Perdew–Burke–Ernzerhof functional. Theoretical modeling showed that the use of DETA as a binder agent can increase the adhesion strength of BN NPs to textile fabric due to the simultaneous hydrogen bonds with cellulose and BN. Due to the difference in zeta potentials (−38.4 vs −25.8 eV), MA-modified h-BN NPs form a stable suspension, while DETA-modified BN NPs tend to agglomerate. Cotton fabric coated with surface-modified NPs exhibits an excellent wash resistance and high hydrophobicity with a water contact angle of 135° (BN–MA) and 146° (BN–DETA). Compared to the original textile material, treatment with MA- and DETA-modified h-BN NPs increases heat resistance by 10% (BN–MA fabric) and 15% (BN–DETA fabric). Cotton fabrics coated with DETA- and MA-modified BN NPs show enhanced antibacterial activity against Escherichia coli U20 and Staphylococcus aureus strains and completely prevent the formation of an E. coli biofilm. The obtained results are important for the further development of fabrics for sports and medical clothing as well as wound dressings