Saltwater-responsive bubble artificial muscles using superabsorbent polymers

Robots operating in changing underwater environments may be required to adapt to these varying conditions. In tidal estuaries, for example, where the degree of salinity cycles in step with the level of the water, a robot may need to adapt its behaviour depending on the position of the tide. In freshwater bodies, the unexpected presence of a pollutant may also require the robot to respond by altering its behaviour. Embodying this sensing and response in the body of the robot means that adaptivity to the environment can be achieved without resorting to centralised control. This can also allow direct responsivity using ‘free’ environmental energy, actuating without requiring stored onboard energy. In this work we present a soft artificial muscle, the contraction of which varies in response to the salinity the water surrounding it. The novel actuator uses a super-absorbent polymer gel encapsulated within a series of discrete cells. This gel readily absorbs water through the membrane wall of the actuator, and can swell to over 300 times its initial volume. This swelling generates significant pressure, changing the shape of the cells and driving the contraction of the muscle. The degree of swelling is significantly reduced by the presence of salts and pollutants in the surrounding water, so transitioning from a freshwater to a saltwater environment causes the muscle to relax. In this paper, we discuss the design and fabrication of these superabsorbent polymer-based Bubble Artificial Muscle (SAP-BAM) actuators. The tensile properties of the muscle under actuated (fresh water) and relaxed (salt water) conditions are characterised, showing a maximum generated force of 10.96N. The length response under constant load for a full actuation cycle is given, showing a maximum contraction of 27.5% of the initial length at 1N load, and the performance over repeated actuation and relaxation cycles is shown. The SAP-BAM muscles are straightforward to fabricate and are composed of low-cost, freely-available materials. Many existing pneumatically-actuated muscles can be modified to use the approach taken for this muscle. The muscle presented in this work represents the first example of a new class of super-absorbent polymer-driven environmental soft artificial muscles

B:Ionic Glove: A Soft Smart Wearable Sensory Feedback Device for Upper Limb Robotic Prostheses

Upper limb robotic prosthetic devices currently lack adequate sensory feedback, contributing to a high rejection rate. Incorporating affective sensory feedback into these devices reduces phantom limb pain and increases control and acceptance. To address the lack of sensory feedback we present the B:Ionic glove, wearable over a robotic hand which contains sensing, computation and actuation on board. It uses shape memory alloy (SMA) actuators integrated into an armband to gently squeeze the user's arm when pressure is sensed in novel electro-fluidic fingertip sensors and decoded through soft matter logic. We found that a circular electro-fluidic sensor cavity generated the most sensitive fingertip sensor and considered a computational configuration to convey different information from robot to user. A user study was conducted to characterise the tactile interaction capabilities of the device. No significant difference was found between the skin sensitivity threshold of participants' lower and upper arm. They found it easier to distinguish stimulation locations than strengths. Finally, we demonstrate a proof-of-concept of the complete device, illustrating how it could be used to grip an object, solely from the affective tactile feedback provided by the B:Ionic glove. The B:Ionic glove is a step towards the integration of natural, soft sensory feedback into robotic prosthetic devices.</p