124 research outputs found
Direct Numerical Investigation of Turbulence of Capillary Waves
We consider the inertial range spectrum of capillary wave turbulence. Under the assumptions of weak turbulence, the theoretical surface elevation spectrum scales with wave number k as I[subscript η] ⌠k[superscript α], where α = α[subscript 0] = -19/4, energy (density) flux P as P[superscript 1/2]. The proportional factor C, known as the Kolmogorov constant, has a theoretical value of C = C[subscript 0] = 9.85 (we show that this value holds only after a formulation in the original derivation is corrected). The k[superscript -19/4] scaling has been extensively, but not conclusively, tested; the P[superscript 1/2] scaling has been investigated experimentally, but until recently remains controversial, while direct confirmation of the value of C[subscript 0] remains elusive. We conduct a direct numerical investigation implementing the primitive Euler equations. For sufficiently high nonlinearity, the theoretical k[superscript -19/4] and P[superscript 1/2] scalings as well as value of C[subscript 0] are well recovered by our numerical results. For a given number of numerical modes N, as nonlinearity decreases, the long-time spectra deviate from theoretical predictions with respect to scaling with P, with calculated values of α C[subscript 0], all due to finite box effect
Physics-Based Learning Models for Ship Hydrodynamics
We present the concepts of physics-based learning models (PBLM) and their relevance and application to the field of ship hydrodynamics. The utility of physics-based learning is motivated by contrasting generic learning models for regression predictions, which do not presume any knowledge of the system other than the training data provided with methods such as semi-empirical models, which incorporate physical insights along with data-fitting. PBLM provides a framework wherein intermediate models, which capture (some) physical aspects of the problem, are incorporated into modern generic learning tools to substantially improve the predictions of the latter, minimizing the reliance on costly experimental measurements or high-resolution high-fidelity numerical solutions. To illustrate the versatility and efficacy of PBLM, we present three wave-ship interaction problems: 1) at speed waterline profiles; 2) ship motions in head seas; and 3) three-dimensional breaking bow waves. PBLM is shown to be robust and produce error rates at or below the uncertainty in the generated data at a small fraction of the expense of high-resolution numerical predictions.United States. Office of Naval Researc
Phase-Resolved Wave Field Simulation Calibration of Sea Surface Reconstruction Using Noncoherent Marine Radar
The possibility of reconstructing sea surface wave fields from a noncoherent X-band marine radar return has much potential for maritime operations and ocean engineering. The existing reconstruction method extracts the signal associated with gravity waves that satisfy the dispersion relationship. The process involves parameters related to how the radar signal is modulated by waves of different lengths, propagation directions, amplitudes, and phases. In the absence of independent wave measurements, these reconstruction parameters cannot be rationally adjusted according to wave field conditions, and the predictions are generally of uneven accuracy and reliability. A new reconstruction method based on concurrent phase-resolved wave field simulations is proposed. By maximizing the correlation between the reconstructed and simulated wave fields over time, optimal values of the reconstruction parameters are obtained that are found to vary appreciably with the wave field properties and with the location and size of the subdomain being sensed and reconstructed. With this phase-resolved simulation calibrated (PRSC) approach, the correlation between the evolving reconstructed wave field and that based on phase-resolved simulation, which measures the consistency and fidelity of the reconstruction, is improved significantly (by up to a factor of 2) and is obtained in a substantially broader range of sea states compared to existing methods.United States. Office of Naval Researc
Interplay between motility and cell-substratum adhesion in amoeboid cells
The effective migration of amoeboid cells requires a fine regulation of cell-substratum adhesion. These entwined processes have been shown to be regulated by a host of biophysical and biochemical cues. Here, we reveal the pivotal role played by calcium-based mechanosensation in the active regulation of adhesion resulting in a high migratory adaptability. Using mechanotactically driven Dictyostelium discoideum amoebae, we uncover the existence of optimal mechanosensitive conditionsâcorresponding to specific levels of extracellular calciumâfor persistent directional migration over physicochemically different substrates. When these optimal mechanosensitive conditions are met, noticeable enhancement in cell migration directionality and speed is achieved, yet with significant differences among the different substrates. In the same narrow range of calcium concentrations that yields optimal cellular mechanosensory activity, we uncovered an absolute minimum in cell-substratum adhesion activity, for all considered substrates, with differences in adhesion strength among them amplified. The blocking of the mechanosensitive ion channels with gadoliniumâi.e., the inhibition of the primary mechanosensory apparatusâhampers the active reduction in substrate adhesion, thereby leading to the same undifferentiated and drastically reduced directed migratory response. The adaptive behavioral responses of Dictyostelium cells sensitive to substrates with varying physicochemical properties suggest the possibility of novel surface analyses based on the mechanobiological ability of mechanosensitive and guidable cells to probe substrates at the nanometer-to-micrometer level.SUTD-MIT International Design Centre (IDC) (IDG31400104
Heterogeneous Swarms for Maritime Dynamic Target Search and Tracking
Current strategies employed for maritime target search and tracking are
primarily based on the use of agents following a predetermined path to perform
a systematic sweep of a search area. Recently, dynamic Particle Swarm
Optimization (PSO) algorithms have been used together with swarming multi-robot
systems (MRS), giving search and tracking solutions the added properties of
robustness, scalability, and flexibility. Swarming MRS also give the end-user
the opportunity to incrementally upgrade the robotic system, inevitably leading
to the use of heterogeneous swarming MRS. However, such systems have not been
well studied and incorporating upgraded agents into a swarm may result in
degraded mission performances. In this paper, we propose a PSO-based strategy
using a topological k-nearest neighbor graph with tunable exploration and
exploitation dynamics with an adaptive repulsion parameter. This strategy is
implemented within a simulated swarm of 50 agents with varying proportions of
fast agents tracking a target represented by a fictitious binary function.
Through these simulations, we are able to demonstrate an increase in the
swarm's collective response level and target tracking performance by
substituting in a proportion of fast buoys.Comment: Accepted for IEEE/MTS OCEANS 2020, Singapor
Gradual Collective Upgrade of a Swarm of Autonomous Buoys for Dynamic Ocean Monitoring
Swarms of autonomous surface vehicles equipped with environmental sensors and
decentralized communications bring a new wave of attractive possibilities for
the monitoring of dynamic features in oceans and other waterbodies. However, a
key challenge in swarm robotics design is the efficient collective operation of
heterogeneous systems. We present both theoretical analysis and field
experiments on the responsiveness in dynamic area coverage of a collective of
22 autonomous buoys, where 4 units are upgraded to a new design that allows
them to move 80\% faster than the rest. This system is able to react on
timescales of the minute to changes in areas on the order of a few thousand
square meters. We have observed that this partial upgrade of the system
significantly increases its average responsiveness, without necessarily
improving the spatial uniformity of the deployment. These experiments show that
the autonomous buoy designs and the cooperative control rule described in this
work provide an efficient, flexible, and scalable solution for the pervasive
and persistent monitoring of water environments.Comment: Proceedings of the OCEANS 2018 conferenc
Computational Naval Ship Hydrodynamics
The primary purpose of our research efforts is to improve naval design and detection capabilities. Our current research efforts leverage high performance computing (HPC) resources to perform high-resolution numerical simulations with hundreds-of-millions to billions of unknowns to study wave breaking behind a transom stern, wave-impact loading, the generation of spray by high-speed planing craft, air entrainment by plunging breaking waves, forced-motion, and storm seas. This paper focuses on the air entrainment and free-surface turbulence in the flow behind a transom-stern and wave-impact loading on marine platforms. Two codes, Numerical Flow Analysis (NFA) and Boundary Data Immersion Method (BDIM), are used in this study. Both codes are Cartesian-based Large-Eddy Simulation (LES) formulations, and use either Volume-of-Fluid (VOF) (NFA) or conservative Volume-of-Fluid (cVOF) BDIM treatments to track the free-surface interface. The first project area discussed is the flow behind the transom stern. BDIM simulations are used to study the volume of entrained air behind the stern. The application of a Lagrangian bubble-extraction algorithm elucidates the location of air cavities in the wake and the bubble-size distribution for a flow that has over 10 percent void fraction. NFA simulations of the transom-stern flow are validated by comparing the numerical simulations to experiments performed at the Naval Surface Warfare Center, Carderock Division (NSWCCD), where good agreement between simulations and experiments is obtained for mean elevations and regions of white water in the wake. The second project area discussed is wave impact loading, a topic driven by recent structural failures of high-speed planing vessels and other advanced vehicles, as well as the devastation caused by Tsunamis impacting low-lying coastal areas. NFA simulations of wave breaking events are compared to the NSWCCD cube impact experiments and the Oregon State University, O.H. Hinsdale Wave Research Laboratories Tsunami experiments, and it is shown that NFA is able to accurately simulate the propagation of waves over long distances after which it also accurately predicts highly-energetic impact events. © 2011 IEEE.United States. Office of Naval Research (N00014-07-C-0184)United States. Office of Naval Research (N00014-01-1-0124
Persistent Cellular Motion Control and Trapping Using Mechanotactic Signaling
Chemotactic signaling and the associated directed cell migration have been extensively studied owing to their importance in emergent processes of cellular aggregation. In contrast, mechanotactic signaling has been relatively overlooked despite its potential for unique ways to artificially signal cells with the aim to effectively gain control over their motile behavior. The possibility of mimicking cellular mechanotactic signals offers a fascinating novel strategy to achieve targeted cell delivery for in vitro tissue growth if proven to be effective with mammalian cells. Using (i) optimal level of extracellular calcium ([Ca2[superscript +] ][subscript ext] = 3 mM) we found, (ii) controllable fluid shear stress of low magnitude (Ï < 0.5 Pa), and (iii) the ability to swiftly reverse flow direction (within one second), we are able to successfully signal Dictyostelium discoideum amoebae and trigger migratory responses with heretofore unreported control and precision. Specifically, we are able to systematically determine the mechanical input signal required to achieve any predetermined sequences of steps including straightforward motion, reversal and trapping. The mechanotactic cellular trapping is achieved for the first time and is associated with a stalling frequency of 0.06 ~ 0.1 Hz for a reversing direction mechanostimulus, above which the cells are effectively trapped while maintaining a high level of directional sensing. The value of this frequency is very close to the stalling frequency recently reported for chemotactic cell trapping [Meier B, et al. (2011) Proc Natl Acad Sci USA 108:11417â11422], suggesting that the limiting factor may be the slowness of the internal chemically-based motility apparatus.SUTD-MIT International Design Centre (Grant IDG31400104
Effects of cutting size and exogenous hormone treatment on rooting of shoot cuttings in Norway spruce [Picea abies (L.) Karst.]
- âŠ