2,600 research outputs found

    Sensorless variable speed single-phase induction motor drive system based on direct rotor flux orientation

    Get PDF
    The single-phase induction motor (SPIM) is one of the electrical machines more used in the World, and can be found in several fractional and sub-fractional horsepower applications in houses, offices, shoppings, farms, and industries. The introduction of more sophisticated applications has required the use of variable speed drives for SPIM, where the adoption of sensorless techniques is the more reasonable option for speed control due to the low cost of this electrical machine. A proposal for sensorless variable speed SPIM drive based on direct rotor field orientation techniques is presented in this paper. None transformation is used in order to eliminate the asymmetry of the stator windings of the SPIM. The rotor speed is estimated from an flux observer, which is based on two independent linear feedback control systems. The speed and flux estimatives are used in two control loop based on PID regulators, which determine the voltages to be applied to the SPIM windings by a three-legs VSI inverter. Using computer simulations, two situations are considered in order to demonstrate the satisfactory performance of the proposed sensorless speed control for SPIM drives: variations on rotor speed reference and the application of mechanical load

    Shear strengthening of masonry wallettes resorting to structural repointing and FRCM composites

    Get PDF
    Results of an experimental campaign conducted on plain and reinforced masonry wallettes subjected to diagonal compression tests are presented in this paper. The masonry panels were reinforced by means of two strengthening techniques: structural repointing achieved by inserting basalt bars in the mortar bed joints and fiber reinforced cementitious matrix (FRCM) composite, obtained by applying a single-ply glass mesh on the sides of the specimens. The structural effects of symmetric and asymmetric strengthening configurations are investigated. The main mechanical parameters, such as shear capacity, ductility and shear modulus, are compared and discussed introducing a calibrated reinforcement ratio. Further, analytical procedures presented in the codes and in literature are followed to predict the shear capacity of the unstrengthened and strengthened wallettes and, finally, compared to the values obtained experimentally.This work was partly financed by FEDER funds through the Operational Programme Competitiveness Factors (COMPETE) and by national funds through the Foundation for Science and Technology (project POCI-01-0145-FEDER-007633). The collaboration of Mr. Mattia Girolomini and the support of the technical staff from the Structural Laboratory of University of Minho during the experimental campaign are gratefully acknowledged. Authors are also grateful to MagmaTech Ltd for kindly providing the basalt bars

    Data of safety in a single-center alemtuzumab treated population

    Get PDF
    Alemtuzumab is approved for highly active MS and, in Europe, can be employed after other disease-modifying treatments (DMTs) as an escalation approach or first therapeutic option. The occurrence of secondary autoimmune adverse events and infections differs depending on the employed approach. In the manuscript entitled “Alemtuzumab treatment of multiple sclerosis in real-world clinical practice: report from a single Italian center” by di Ioia M. and collaborators, efficacy and safety data of alemtuzumab were evaluated in a real-world MS population. The aim of the article is to describe in detail the unexpected serious adverse events which occurred in this cohort during and after the administration of the alemtuzumab treatment. Adverse events were observed in 45,7% of the patients. These events were ranked as severe in 23% of the patients. We reported, in particular, cases of autoimmune hemolytic anemia (AIHA), pancytopenia, viral hepatitis E and noninfectious meningo-encephalomyelitis

    Functionalization of a layered oxide with organic moieties: towards hybrid proton conductors

    Get PDF
    The design of innovative proton conductors for intermediate-temperature fuel cells, closing the gap between PEMFC and SOFC, is a forefront research theme in materials chemistry. [1] Layered perovskites with the Dion-Jacobson structure (ALaNb2O7) have bidimensional lanthanum niobate sheets, separated by a layer of A+ cations. These can be substituted by a variety of molecules with soft chemistry, to yield inorganic-organic hybrids. In particular, the intercalation of amines, alcohols, carboxylic or phosphonic acids, and their covalent binding to the sheets has been demonstrated recently. [2-4]We present preliminary results on the intercalation and covalent bonding of different organic molecules, in order to develop hybrid proton conductors for use in intermediate temperature fuel cells. Smaller molecules (such as alcohols) are intercalated to expand the interlayer space, to form intermediates for the further binding of proton carriers such as imidazoles or sulfonates.The intercalation process is investigated by XRD (to measure the interlayer distance) and TGA (to determine the weight loss upon thermal decomposition). NMR is applied to confirm the covalent bonding between the organic and oxide parts. The intercalation behavior of different functional groups is explained in terms of van der Waals and/or hydrogen bonding between organic chains. The interplay of theory (ab initio and periodic DFT) and experiment allowed us to elucidate the 1H and 13C-NMR spectra, and to investigate the nature of interaction (i.e. ionic or covalent bond) of the organic chains with the interlayer surface

    Combination therapy with warfarin plus clopidogrel improves outcomes in femoropopliteal bypass surgery patients

    Get PDF
    Background: Patients having undergone femoropopliteal bypass surgery remain at significant risk of graft failure. Although antithrombotic therapy is of paramount importance in these patients, the effect of oral anticoagulation therapy (OAT) on outcomes remains unresolved. We performed a randomized, prospective study to assess the impact of OAT plus clopidogrel vs dual antiplatelet therapy on peripheral vascular and systemic cardiovascular outcomes in patients who had undergone femoropopliteal bypass surgery. Methods: Three hundred forty-one patients who had undergone femoropopliteal surgery were enrolled and randomized: 173 patients received clopidogrel 75 mg/d plus OAT with warfarin (C + OAT), and 168 patients received dual antiplatelet therapy with clopidogrel 75 mg/d plus aspirin 100 mg/d (C + acetylsalicylic acid [ASA]). Study end points were graft patency and the occurrence of severe peripheral arterial ischemia, and the incidence of bleeding episodes. Results: Follow-up ranged from 4 to 9 years. The graft patency rate and the freedom from severe peripheral arterial ischemia was significantly higher in C + OAT group than in C + ASA group (P =.026 and.044, respectively, Cox-Mantel test). The linearized incidence of minor bleeding complications was significantly higher in C + OAT group than in C + ASA group (2.85% patient-years vs 1.37% patient-years; P =.03). The incidence of major adverse cardiovascular events, including mortality, was found to be similar (P =.34) for both study groups. Conclusions: In patients who have undergone femoropopliteal vascular surgery, combination therapy with clopidogrel plus warfarin is more effective than dual antiplatelet therapy in increasing graft patency and in reducing severe peripheral ischemia. These improvements are obtained at the expenses of an increase in the rate of minor anticoagulation-related complications. © 2012 Society for Vascular Surgery

    A Hybrid Storage Systems for All Electric Aircraft

    Get PDF
    A hybrid energy storage system specifically designed for a fully electric aircraft is presented in the paper. The analysis of the time evolution of the power demand of the electric propulsion system during a test mission of Maxwell X-57, an all-electric aircraft developed by NASA, has pointed out the presence of significant peak power during take-off and air tack. Considered the issues related to weight and the volume of the energy storage systems (ESSs) in all-electric aircraft, a hybridization of aircraft ESS with a Supercapacitors (SCs) bank, devoted to smooth peak power demand, has been investigated. A comparison between the simulation results of an electrochemical battery and hybrid ESSs, designed on the test mission of Maxwell X-57 power demand, has been developed. The advantage of hybrid configuration with respect to battery-based one in term of volume and weight reduction is finally presented

    Topoisomerase II alpha and TLE3 as predictive markers of response to anthracycline and taxane-containing regimens for neoadjuvant chemotherapy in breast cancer.

    Get PDF
    PURPOSE: Anthracyclines and taxanes are considered the standard for neoadjuvant chemotherapy of breast cancer, although they are often associated with serious side effects and wide variability of individual response. In this study, we analyzed the value of topoisomerase II alpha (TOP2A) and transducin-like enhancer of split 3 (TLE3) as predictive markers of response to therapy with anthracyclines and taxanes. MATERIALS AND METHODS: TOP2A and TLE3 protein expressions were evaluated using immunohistochemistry on 28 samples, obtained by core needle biopsy in patients with locally advanced breast carcinoma, subsequently subjected to epirubicin- and paclitaxel-based neoadjuvant chemotherapy. The immunohistochemical staining was correlated with the clinical response measured by the tumor size reduction evaluated by breast magnetic resonance imaging, prior and after chemotherapy, and by pathologic evaluation of the surgical specimen. RESULTS: Neoadjuvant chemotherapy achieved a size reduction in 26/28 tumors (92.9%), with an average percentage decrease of 45.6%. A downstaging was achieved in 71.4% of the cases of locally advanced carcinoma. TOP2A positivity was correlated with a greater reduction in tumor diameter (P=0.06); negative staining for TLE3 was predictive of a better response to neoadjuvant chemotherapy (P=0.07). A higher reduction in tumor diameter (P=0.03) was also found for tumors that were concurrently TLE3-negative and TOP2A-positive. CONCLUSION: TOP2A and TLE3 showed a correlation with response to neoadjuvant chemotherapy. While TOP2A is a well-known marker of response to anthracyclines-based chemotherapy, TLE3 is a new putative predictor of response to taxanes. Data from the current study suggest that TOP2A and TLE3 warrant further investigation in a larger series as predictors of response to neoadjuvant chemotherapy for locally advanced breast carcinoma
    • …
    corecore