74 research outputs found
Time-resolved single-photon detection module based on silicon photomultiplier: A novel building block for time-correlated measurement systems
We present the design and preliminary characterization of the first detection module based on Silicon Photomultiplier (SiPM) tailored for single-photon timing applications. The aim of this work is to demonstrate, thanks to the design of a suitable module, the possibility to easily exploit SiPM in many applications as an interesting detector featuring large active area, similarly to photomultipliers tubes, but keeping the advantages of solid state detectors (high quantum efficiency, low cost, compactness, robustness, low bias voltage, and insensitiveness to magnetic field). The module integrates a cooled SiPM with a total photosensitive area of 1 mm2 together with the suitable avalanche signal read-out circuit, the signal conditioning, the biasing electronics, and a Peltier cooler driver for thermal stabilization. It is able to extract the single-photon timing information with resolution better than 100 ps full-width at half maximum. We verified the effective stabilization in response to external thermal perturbations, thus proving the complete insensitivity of the module to environment temperature variations, which represents a fundamental parameter to profitably use the instrument for real-field applications. We also characterized the single-photon timing resolution, the background noise due to both primary dark count generation and afterpulsing, the single-photon detection efficiency, and the instrument response function shape. The proposed module can become a reliable and cost-effective building block for time-correlated single-photon counting instruments in applications requiring high collection capability of isotropic light and detection efficiency (e.g., fluorescence decay measurements or time-domain diffuse optics systems)
Pushing Time-Domain Diffuse Optics to Its Ultimate Limits: New Large-Area Detector and Operation Modality
Large area single-photon detectors enhance light harvesting capability beyond state-ofthe-art provided that pile-up distortion is corrected. We test a 10 × 10 mm2 SiPM-based detector and study the possibility to work beyond singe-photon statistics
Large area silicon photomultipliers allow extreme depth penetration in time-domain diffuse optics
We present the design of a novel single-photon timing module, based on a Silicon Photomultiplier (SiPM) featuring a collection area of 9 mm2. The module performs Single-Photon Timing Resolution of about 140 ps, thus being suitable for diffuse optics application. The small size of the instrument (5 cm × 4 cm × 10 cm) allows placing it directly in contact with the sample under investigation, maximizing that way the signal harvesting. Thanks to that, it is possible to increase the source detector distance up to 6 cm or more, therefore enhancing the penetration depth up to an impressive value of 4 cm and paving the way to the exploration of the deepest human body structures in a completely non-invasive approach
Enhanced diffuse optical tomographic reconstruction using concurrent ultrasound information
Multimodal imaging is an active branch of research as it has the potential to improve common medical imaging techniques. Diffuse optical tomography (DOT) is an example of a low resolution, functional imaging modality that typically has very low resolution due to the ill-posedness of its underlying inverse problem. Combining the functional information of DOT with a high resolution structural imaging modality has been studied widely. In particular, the combination of DOT with ultrasound (US) could serve as a useful tool for clinicians for the formulation of accurate diagnosis of breast lesions. In this paper, we propose a novel method for US-guided DOT reconstruction using a portable time-domain measurement system. B-mode US imaging is used to retrieve morphological information on the probed tissues by means of a semi-automatical segmentation procedure based on active contour fitting. A two-dimensional to three-dimensional extrapolation procedure, based on the concept of distance transform, is then applied to generate a three-dimensional edge-weighting prior for the regularization of DOT. The reconstruction procedure has been tested on experimental data obtained on specifically designed dual-modality silicon phantoms. Results show a substantial quantification improvement upon the application of the implemented technique.
This article is part of the theme issue ‘Synergistic tomographic image reconstruction: part 2’
Memory effect in silicon time-gated single-photon avalanche diodes
We present a comprehensive characterization of the memory effect arising in thin-junction silicon Single-Photon Avalanche Diodes (SPADs) when exposed to strong illumination. This partially unknown afterpulsing-like noise represents the main limiting factor when time-gated acquisitions are exploited to increase the measurement dynamic range of very fast (picosecond scale) and faint (single-photon) optical signals following a strong stray one. We report the dependences of this unwelcome signal-related noise on photon wavelength, detector temperature, and biasing conditions. Our results suggest that this so-called "memory effect" is generated in the deep regions of the detector, well below the depleted region, and its contribution on detector response is visible only when time-gated SPADs are exploited to reject a strong burst of photons
High throughput compressive fluorescence lifetime imaging with a silicon photomultiplier detector
Fluorescence lifetime imaging microscopy (FLIM) is a powerful technique for studying biological processes. There exists a growing interest in developing strategies to enhance throughput and reduce acquisition time of FLIM systems, which commonly employ laser scanning excitation and time-correlated single-photon counting (TCSPC) detection. In this work, we propose a wide-field FLIM microscope based on compressive sensing and high photon rate detection (beyond pile-up limit) based on a high-efficiency silicon photomultiplier detector as a single-pixel camera. We experimentally validate the capabilities of this design achieving 20 frames per second FLIM images on free-moving green algae sample
First in-vivo diffuse optics application of a time-domain multiwavelength wearable optode
The optode is an innovative, ultra-compact (few cm3) multiwavelength system for timedomain diffuse optics. We present here the first in-vivo measurements that benefit from this technological breakthrough
Time-resolved diffuse optical tomography for non-invasive flap viability assessment: Pre-clinical tests on rats
We present a new setup for time-resolved diffuse optical tomography based on multiple source-detector acquisitions analysed by means of the Mellin-Laplace transform. The proposed setup has been used to perform pre-clinical measurements on rats in order to show its suitability for non-invasive assessment of flap viability
Multiple-view time-resolved diffuse optical tomography based on structured illumination and compressive detection
A time-resolved Diffuse Optical Tomography system based on multiple view acquisition, pulsed structured light illumination and detection with spatial compression is proposed. Reconstructions on heterogeneous tissue mimicking phantoms are presented
- …