A new coupling solution for G3-PLC employment in MV smart grids

This paper proposes a new coupling solution for transmitting narrowband multicarrier power line communication (PLC) signals over medium voltage (MV) power lines. The proposed system is based on an innovative PLC coupling principle, patented by the authors, which exploits the capacitive divider embedded in voltage detecting systems (VDS) already installed inside the MV switchboard. Thus, no dedicated couplers have to be installed and no switchboard modifications or energy interruptions are needed. This allows a significant cost reduction of MV PLC implementation. A first prototype of the proposed coupling system was presented in previous papers: it had a 15 kHz bandwidth useful to couple single carrier PSK modulated PLC signals with a center frequency from 50–200 kHz. In this paper, a new prototype is developed with a larger bandwidth, up to 164 kHz, thus allowing to couple multicarrier G3-PLC signals using orthogonal frequency division multiplexing (OFDM) digital modulation. This modulation ensures a more robust communication even in harsh power line channels. In the paper, the new coupling system design is described in detail. A new procedure is presented for tuning the coupling system parameters at first installation in a generic MV switchboard. Finally, laboratory and in-field experimental test results are reported and discussed. The coupling performances are evaluated measuring the throughput and success rate in the case of both 18 and 36 subcarriers, in one of the different tone masks standardized for the FCC-above CENELEC band (that is, from 154.6875–487.5 kHz). The experimental results show an efficient behavior of the proposed coupler allowing a two-way communication of G3-PLC OFDM signals on MV networks

Assessment of ground-motion amplification in the Fucino Basin (Central Italy) through seismic data

The Fucino basin (Central Italy) is one of the largest intermountain alluvial plain in the Appennines range. It has a tectonic origin related to the presence of important systems of faults located in its northern and eastern edges. Some of these faults are still active and capable of generating strong seismic events as the January 13th 1915 Ms 7.0 Avezzano earthquake (about 30000 casualties). Site effects related to the soft soils filling the basin can be very important also taking into account the presence of historical villages located at the edges of the basin and new settlements developed in the area. In this paper we show the preliminary results of a seismic network installed in the Fucino area in order to collect information about site amplification effects and geometry of the basin. A lake occupied the Fucino basin for many thousands of years and it was completely drained at the end of the 19th century. We analyze ambient seismic vibrations and recordings of about 150 local earthquakes mainly related to the seismic sequence of the April 6th 2009 Mw 6.3 L’Aquila event. Moreover the strongest events of L’Aquila sequence were analyzed at the three strong-motion permanent stations operating in the area. Using standard spectral techniques we investigate the variation of resonance frequencies within the basin. The ground motion recorded in the Fucino plain is mainly characterized by strong energy at low-frequencies (f < 1 Hz) affecting both horizontal and vertical components. This is particularly evident for stations deployed in correspondence of very thick deposits of sedimentary filling, where a significant increase of ground-motion amplitude and duration is caused by locally generated surface waves. The amplification at low-frequencies (< 1 Hz) on the horizontal components can reach up a factor of 10 in comparison to nearby stiff sites. However, we found evidences of seismic amplification phenomena also for stiff sites surrounding the basin, including stations of the Italian strong motion network. The independent geological information, the shallow shear-velocity profiles available for the basin can be combined with resonance frequencies of the sites for deriving representative geological sections to be used as base for future numerical 2D-3D modeling of the seismic wave propagation in the basin. Seismic modeling can be important to reduce the seismic hazard in the area

Assessment of ground-motion amplification in the Fucino Basin (Central Italy) through seismic data

The Fucino basin (Central Italy) is one of the largest intermountain alluvial plain in the Appennines range. It has a tectonic origin related to the presence of important systems of faults located in its northern and eastern edges. Some of these faults are still active and capable of generating strong seismic events as the January 13th 1915 Ms 7.0 Avezzano earthquake (about 30000 casualties). Site effects related to the soft soils filling the basin can be very important also taking into account the presence of historical villages located at the edges of the basin and new settlements developed in the area. In this paper we show the preliminary results of a seismic network installed in the Fucino area in order to collect information about site amplification effects and geometry of the basin. A lake occupied the Fucino basin for many thousands of years and it was completely drained at the end of the 19th century. We analyze ambient seismic vibrations and recordings of about 150 local earthquakes mainly related to the seismic sequence of the April 6th 2009 Mw 6.3 L’Aquila event. Moreover the strongest events of L’Aquila sequence were analyzed at the three strong-motion permanent stations operating in the area. Using standard spectral techniques we investigate the variation of resonance frequencies within the basin. The ground motion recorded in the Fucino plain is mainly characterized by strong energy at low-frequencies (f < 1 Hz) affecting both horizontal and vertical components. This is particularly evident for stations deployed in correspondence of very thick deposits of sedimentary filling, where a significant increase of ground-motion amplitude and duration is caused by locally generated surface waves. The amplification at low-frequencies (< 1 Hz) on the horizontal components can reach up a factor of 10 in comparison to nearby stiff sites. However, we found evidences of seismic amplification phenomena also for stiff sites surrounding the basin, including stations of the Italian strong motion network. The independent geological information, the shallow shear-velocity profiles available for the basin can be combined with resonance frequencies of the sites for deriving representative geological sections to be used as base for future numerical 2D-3D modeling of the seismic wave propagation in the basin. Seismic modeling can be important to reduce the seismic hazard in the area

Incremental heuristic approach for meter placement in radial distribution systems

The evolution of modern power distribution systems into smart grids requires the development of dedicated state estimation (SE) algorithms for real-time identification of the overall system state variables. This paper proposes a strategy to evaluate the minimum number and best position of power injection meters in radial distribution systems for SE purposes. Measurement points are identified with the aim of reducing uncertainty in branch power flow estimations. An incremental heuristic meter placement (IHMP) approach is proposed to select the locations and total number of power measurements. The meter placement procedure was implemented for a backward/forward load flow algorithm proposed by the authors, which allows the evaluation of medium-voltage power flows starting from low-voltage load measurements. This allows the reduction of the overall costs of measurement equipment and setup. The IHMP method was tested in the real 25-bus medium-voltage (MV) radial distribution network of the Island of Ustica (Mediterranean Sea). The proposed method is useful both for finding the best measurement configuration in a new distribution network and also for implementing an incremental enhancement of an existing measurement configuration, reaching a good tradeoff between instrumentation costs and measurement uncertainty

Prognostic and Functional Significant of Heat Shock Proteins (HSPs) in Breast Cancer Unveiled by Multi-Omics Approaches

Heat shock proteins (HSPs) are a well-characterized molecular chaperones protein family, classified into six major families, according to their molecular size. A wide range of tumors have been shown to express atypical levels of one or more HSPs, suggesting that they could be used as biomarkers. However, the collective role and the possible coordination of HSP members, as well as the prognostic significance and the functional implications of their deregulated expression in breast cancer (BC) are poorly investigated. Here, we used a systematic multi-omics approach to assess the HSPs expression, the prognostic value, and the underlying mechanisms of tumorigenesis in BC. By using data mining, we showed that several HSPs were deregulated in BC and significantly correlated with a poor or good prognosis. Functional network analysis of HSPs co-expressed genes and miRNAs highlighted their regulatory effects on several biological pathways involved in cancer progression. In particular, these pathways concerned cell cycle and DNA replication for the HSPs co-expressed genes, and miRNAs up-regulated in poor prognosis and Epithelial to Mesenchymal Transition (ETM), as well as receptors-mediated signaling for the HSPs co-expressed genes upregulated in good prognosis. Furthermore, the proteomic expression of HSPs in a large sample-set of breast cancer tissues revealed much more complexity in their roles in BC and showed that their expression is quite variable among patients and confined into different cellular compartments. In conclusion, integrative analysis of multi-omics data revealed the distinct impact of several HSPs members in BC progression and indicate that collectively they could be useful as biomarkers and therapeutic targets for BC management

Characterization of DC series arc faults in PV systems based on current low frequency spectral analysis

This work presents an experimental study focused on the characterization of series arc faults in direct current (DC) photovoltaic (PV) systems. The aim of the study is to identify some relevant characteristics of arcing current, which can be obtained by means of low frequency spectral analysis of current signal. On field tests have been carried out on a real PV system, in accordance with some tests requirements of UL 1699B Standard for protection devices against PV DC arc faults. Arcing and non-arcing current signals are acquired and compared and the behavior of a set of indicators proposed by authors is analyzed. Different measurement equipment have been used, in order to study the impact of both measurement transducers and data acquisition systems on proposed indicators effectiveness. Presented results show that the considered indicators are suitable for detecting the arc presence even with commercial devices normally used for smart metering applications

An interface protection system based on an embedded metrology system platform

The aim of this work is to present an interface protection system (IPS) for Distributed Generators (DG) and Energy Storage Systems (ESS). The new prototype of IPS guarantees standard protection requirements, in terms of both voltage and frequency measurement accuracies and trip times. Moreover, it has the additional functionalities of implementing a communication link between the Distribution System Operator (DSO) and the DG and ESS Inverter. The new IPS is based on a smart meter platform with an integrated power line communication modem. Moreover, it has also an integrated metrology section. Experimental tests will show how this last feature allows a significant reduction of the measurement data access time allowing an improvement of trip time accuracy

Effectiveness of high dose sublingual immunotherapy to induce a stepdown of seasonal asthma: a pilot study

There is ample evidence to support the efficacy of sublingual immunotherapy (SLIT) on allergic rhinitis, while there is less solid data regarding asthma. We evaluated the effects of a high dose birch SLIT on birch-induced rhinitis and asthma in a controlled study

Effetti di sito della piana del Fucino attraverso lo studio comparato di dati sismici e geologici

Il presente lavoro è incentrato nello studio della Piana del Fucino in termini di risposta sismica attraverso metodi di analisi geofisica e correlazioni dei risultati ottenuti con la geologia dell’area. Uno dei terremoti più disastrosi della storia italiana è quello verificatosi nel gennaio del 1915 nella Marsica; ciò testimonia che l’area oggetto di studio è fortemente esposta al rischio sismico. È quindi opportuno provvedere alla riduzione di tale rischio operando in termini di prevenzione. Uno dei metodi consiste nella determinazione dei livelli di scuotimento al suolo attesi in caso di terremoto attraverso lo studio degli effetti di sito. Per fare ciò si sono utilizzati i segnali sismici registrati da una rete di stazioni installate dall’Istituto Nazionale di Geofisica e Vulcanologia per la caratterizzazione geologico-geotecnica dei siti delle stazioni accelerometriche della Rete Accelerometrica Nazionale (richiesto in uno dei Progetti previsti della convenzione tra il Dipartimento della Protezione Civile e l’INGV nel triennio 2007- 2009). L’intervallo temporale coperto dalle stazioni va dall’ottobre 2008 al settembre 2009 ed il dataset selezionato comprende terremoti con Magnitudo superiore a 2 entro un raggio medio di 60 km da Avezzano. In seconda istanza si è proceduto all’installazione di altre stazioni temporanee sempre all’interno della Piana con lo scopo di registrare rumore ambientale a completamento dei dati già in possesso

A PC-Based Instrument for Automatic Monitoring and Control of a CPVT Power Plant

A PC-based instrument has been developed for the monitoring and control of a concentrated photovoltaic and thermal (CPVT) power plant. The instrument allows acquiring both electrical and thermal quantities. Moreover it implements the solar tracking algorithm used to optimize the power production